WIRELESS LED KEYPAD EKB3W EN 9
EN
1 . GENERAL OPERATIONAL DESCRIPTION
MAIN FEATURES
• Arming and disarming
• STAY-arming
• Violated zone bypass and bypassed zone acivaion
• System coniguraion
• PGM output control
• Back-light
• Visual indicaion by LED indicators
• Audible indicaion by built-in buzzer
EKB3W is a wireless accessory intended for ELDES alarm
systems ESIM364 and EPIR3. This keypad comes equipped with
16 keys and 18 LED indicators and a buzzer for audio indicaion.
Typically, the coniguraion of the system by EKB3W keypad
is carried out by acivaing the Coniguraion mode using the
installer code and entering a valid coniguraion command using
the number keys 0
9
, key for conirmaion and key
*
to clear the characters that have been entered. Alternaively,
the user can wait for 10 seconds unil the keypad buzzer will
provide a long beep indicaing that the entered characters have
been cleared. By pressing any key on the keypad will result in
acivaion of the back-light lasing for 10 seconds (customizable)
ater the last keystroke. When typing in the characters, each
keystroke is followed by a short beep of the keypad buzzer, while
the red indicator lights up relecing a respecive number key
0
9
that is being pressed when typing in a coniguraion
command (key 0is indicated by red indicator “10”).
Addiionally, the LED indicators and the keypad buzzer indicate
the alarm condiion.
EKB3W comes equipped with 1 zone terminal designed for
passive wired digital sensor connecion, such as magneic door
contact, and a tamper switch located on the back side of the
device for enclosure state supervision.
It is possible to connect up to 4 EKB3W devices to ESIM364 or
EPIR3 alarm system. The maximum wireless connecion range is
150m (492.13t) (in open areas).
