Elation POWER SPOT 700CMY Manual de usuario

Revised 4/4/2007 visage

POWER SPOT 700CMY

User Manual

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 2

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 3

Table of Contents

Introduction...........................................................................................................................4

Unpacking ....................................................................................................................4

Customer Support ......................................................................................................4

Discharge Lamp Precautions ..................................................................................5

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 4

INTRODUCTION: Congratulations, you have just purchased one of the most innovative

and reliable lighting fixtures on the market today! The Power Spot 700CMY™, has been

designed to perform reliably for years when the guidelines in this booklet are followed.

Please read and understand the instructions in this manual carefully and thoroughly

before attempting to operate this unit. These instructions contain important information

regarding safety during use and maintenance.

UNPACKING: Thank you for purchasing the Power Spot 700CMY™ by Elation

Professional®. Every Power Spot 700CMY™ has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping carton for damage

that may have occurred during shipping. If the carton appears to be damaged, carefully

inspect your unit for damage and be sure all accessories necessary to operate the unit

have arrived intact. In the event damage has been found or parts are missing, please

contact our customer support team for further instructions. Please do not return this unit

to your dealer without first contacting customer support at the number listed below.

CUSTOMER SUPPORT: Elation Professional® provides a customer support line, to

provide set up help and to answer any question should you encounter problems during

your set up or initial operation. You may also visit us on the web at

www.elationlighting.com for any comments or suggestions. For service related issue

please contact Elation Professional®. Service Hours are Monday through Friday 9:00

a.m. to 5:00 p.m. Pacific Standard Time.

Voice: (866) 245-6726

Fax: (323) 582-3108

E-mail: [email protected]

Forum: www.ElationLighting.com/forum/

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit

to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please recycle whenever

possible.

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 5

WARRANTY REGISTRATION: The Power Spot 700CMY™ carries a two year (730 days)

limited warranty. Please fill out the enclosed warranty card to validate your purchase. All

returned service items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. The R.A. number must be clearly

written on the outside of the return package. A brief description of the problem as well as

the R.A. number must also be written down on a piece of paper and included in the

shipping container. If the unit is under warranty, you must provide a copy of your proof of

purchase invoice. Items returned without a R.A. number clearly marked on the outside of

the package will be refused and returned at cutomers exspence. You may obtain a R.A.

number by contacting customer support at (323) 582-3322.

DISCHARGE LAMP WARNING: This fixture is fitted with a discharge

lamp, which is highly susceptible to damage if improperly handled.

Never touch the lamp with your bare hands, as the oil from your

hands will shorten lamp life. Also, never move the fixture until the

lamps have had ample time to cool. Remember, lamps are not

covered under warranty conditions.

This fixture emits intense UV radiation, which is harmful to the eyes and skin. The

intense luminance of the lamp can cause severe damage to the retina. Never operate

this fixture with the protective covers removed, these covers have been specially

designed to shield against UV radiation.

Epileptic Warning: Those suffering from epilepsy should avoid looking directly into the

lamp at all times.

Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce

lamp life and intensity.

To achieve the intensity associated with discharge lamps, these lamps use a gas

sealed in a high-pressure environment to emit a brilliant output. Due to the high

pressure involved with the construction of the lamp, the lamp may explode during

prolonged extensive use. This risk is increased with age; added care is encouraged

when dealing with older lamps. Thus, lamp should always be replaced at the end of

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 6

their recommended duty cycle. Extreme caution should be used when operated this or

any fixture fitted with a gas discharge lamp.

Never open this fixture while in use!

During the initial operation of this fixture, a light smoke or smell may emit from the

interior of the fixture. This is a normal process and is caused by excess paint in the

interior of the casing burning off from the heat associated with the lamp.

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

All electrical connections must performed by qualified personal.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged,

replace it immediately with a new one of similar power rating.

Always disconnect from main power before performing any type of service or any

cleaning procedure.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire

portion of the cord.

Please be aware that damages caused by modifications to the device are not subject

to warranty.

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 7

2. SAFETY INSTRUCTIONS

The Power Spot 700CMY™ is an extremely sophisticated piece

of electronic equipment. To guarantee a smooth operation, it is

important to follow the guidelines in this manual. The

manufacturer of this device will not accept responsibility for

damages resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

1. Always be sure that the fan and the air inlets remain clean and are never

blocked. Allow about 6” (15cm) between this fixture and other devices or a wall

to allow for proper cooling.

2. Never touch the fixture during normal operation. This can cause severe

personal injuries and/or damage to the fixture.

3. Be sure to unplug the POWER SPOT 700CMY™ from the power outlet before

performing any service related issues.

4. Lamp Replacement; Allow at least 30 minutes after disconnecting main power

before you open the POWER SPOT 700CMY™. To prevent personal injury,

never touch the lamp if you are not absolutely sure it has cooled.

5. Never look directly into the lamp beam. You risk injury to your retina, which may

induce blindness.

6. Be sure to track and record the lamp running time. The lamp should be

changed at the end of the specified lamp life, regardless of lamp output. You

may also have to change the lamp if it shows any deformations or damage.

The same is with all glass components, color filters, lenses and mirrors.

7. For safe operation, follow the Installation guide described in chapter two of this

manual. Operating the POWER SPOT 700CMY™ without suited safety aids

such as safety cables or clamps can increase the risk of damage and/or

personal injury.

8. Installation should only be performed by qualified and certified personal.

9. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty

and may increase the risk of damage and/or personal injury.

10. To reduce the risk of fire or shock, do not expose this unit to rain or moisture.

11. Do not attempt to operate this fixture if the power cord is frayed or damaged.

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 8

3. FEATURES

•Pan 530° / Tilt 280°

•3 operation mode: DMX controlled, stand alone or sound activated

•Electronic Power Supply

•Control board with 4-digit display

•Digital display can be turned 180° to fit different installation position

•CMY Subtractive Color Mixing

•Additional Color Wheel: 8 User replacable colors

•2 Gobo Wheels:

oFixed: 9 plus open

oRotating: 7 Suer replaceable plus open

•Auto test for all functions

•Automatic Pan/Tilt Correction

•Glass Dichroic Reflector for Even Lamp Output

•Anti-Reflective Coated Lenses

•Brilliant MSR700/2 Lamp (700w, 1000Hrs, 7200K)

•USITT DMX-512 Complaint

•Value of each DMX-channel can be displayed

•Uses 24 DMX Channels (16-bit mode)

•Variable Frost Filter

•Variable Color Correction Filter

•3-Facet Prism

•Variable Animation Wheel

•User Replaceable Color and Gobos

•Intergrated Tilt Lock System

•Modular Construction

•Variable Zoom: 14˚~32˚ (Beam Angle)

•Motor Driven Focus

•Variable Iris (4%~100%)

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 9

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how

to so.

This fixture was designed for indoor use only.

Consistent operational breaks may ensure that the fixture will function properly for many

years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

While choosing an installation location, please be sure that the fixture will not be

exposed to extreme heat, moisture or dust. The minimum distance between the fixture

and a wall or flat surface should be at least .5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be to use mounting hardware no less than M10 x 25

mm, also be sure the hardware is insert in the pre-arranged screw holes in the base of

the fixture.

When using the quick release “Omega” cam-lock system, be sure the four quick lock

fasteners are locked in the quick lock holes correctly, see page 16 for more information

on the proper mounting procedures.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical

fixture; most damages are the result of operation by person unfamiliar with the operation

of this type of fixture.

If service is ever required, please use the original packaging to transport the fixture in for

service.

Power Spot 700CMY™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 10

Transportation and Handling

The POWER SPOT 700CMY™comes with two carrying handles built into the base.

Always transport the fixture by these handles. Never lift or carry the POWER SPOT

700CMY™ by the yoke (head assembly) this can seriously damage the unit and will void

your manufactures warranty.

Connections

Power supply:

Electronic ballast with:

90~260 Volts, 50~60 Hz,

Grounded contact type plug – Neutrik Powercon

Connected load 1000W <=> 4.5 A (blind current compensation).

NOTE: The universal power supply will accept any voltage source as detailed

above without any type of internal or user modifications.

DMX:

USITT DMX 512 Standard input/output, 3 pole connectors.

[+] = Pin 3 / [-] = Pin 2 / [Ground] = Pin 1

Fuse Requirements:

The POWER SPOT 700CMY’s electronic and lamp systems are protected by two

GMA (5x20mm) external fuses:

Lamp: 250v/10A (120v Operation) or 250v/5A (220v Operation)

Electronics: 250v/2A (120v Operation) or 250v/1A (220v Operation)

The fuse requirements are clearly printed on the side of the fixture.

•Always disconnect main power before changing the fuse!

•Always replace with the exact same type fuse unless otherwise specified by

an authorized Elation® service technician. Replacing with anything other

than the specified fuse can severely damage your fixture and will void your

manufactures warranty.

Tabla de contenidos

Otros manuales de Equipo de iluminación de Elation

Elation

Elation PIXEL WASH 40IP Manual de usuario

Elation

Elation Outdoor LED Par Fixture ELAR EXPAR Manual de usuario

Elation

Elation Arena Par Manual de usuario

Elation

Elation KL FRESNEL 8 CW Manual de usuario

Elation

Elation Aquarius II Manual de usuario

Elation

Elation Trio-1248 Manual de usuario

Elation

Elation EVENT PANEL SYSTEM Manual de usuario

Elation

Elation DW PROFILE Manual de usuario

Elation

Elation Level Q7 IP Manual de usuario

Elation

Elation SIXPAR 300WMG Manual de usuario

Elation

Elation PIXEL DRIVER 4000 Manual de usuario

Elation

Elation Design Spot 300E Manual de usuario

Elation

Elation KL FRESNEL 8 FC Manual de usuario

Elation

Elation KL SPOT IP Manual de usuario

Elation

Elation LED White Light Fresnel ELED Fresnel Manual de usuario

Elation

Elation ELAR QUAD STRIP Manual de usuario

Elation

Elation Level Q7 IP Manual de usuario

Elation

Elation ELAR EXQUADPAR HP Manual de usuario

Elation

Elation KL FRENSEL 6 Manual de usuario

Elation

Elation PROTEUS EXCALIBUR Manual de usuario

Elation

Elation PROTEUS HYBRID Manual de usuario

Elation

Elation ARENA Q7 ZOOM Manual de usuario

Elation

Elation Design LED 60 TriStrip Manual de usuario

Elation

Elation Rayzor Q7 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario