Elation PIXEL DRIVER 1000IP Manual de usuario
User Manual
PIXEL DRIVER 1000IP
©2020 ELATION PROFESSIONAL all rights reserved. Information, specications, diagrams, images,
and instructions herein are subject to change without notice. ELATION PROFESSIONAL logo and
identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL. Copy-
right protection claimed includes all forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted. Product names used in this docu-
ment may be trademarks or registered trademarks of their respective companies and are hereby ac-
knowledged. All non-ELATION brands and product names are trademarks or registered trademarks
of their respective companies.
ELATION PROFESSIONAL and all aliated companies hereby disclaim any and all liabilities for
property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect
economic loss associated with the use or reliance of any information contained within this docu-
ment, and/or as a result of the improper, unsafe, insucient and negligent assembly, installation,
rigging, and operation of this product.
Due to additional product features and/or enhancements, an
updated version of this document may be available online.
Please scan the QR Code with your mobile device or visit
www.elationlighting.com for the latest revision/update of this
manual, before installation and/or programming.
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000
+52 (728) 282-7070
2
Date Document
Version
Software
Version
DMX Channel Mode Notes
10/30/20 1.0 1.0 Not applicable. Initial Release
DOCUMENT VERSION
CONTENTS
3
General Information 4
Limited Warranty (USA Only) 5
Safety Guidelines 6
Overview 8
Installation 9
Driver Output Limitations 13
RGB Pixel Control Modes 14
Control Panel 16
System Menu 17
Dimensional Drawings 21
Specifications 22
INTRODUCTION
Please read and understand the instructions in this manual carefully and thoroughly before attempting
to operate this device. These instructions contain important safety and use information.
UNPACKING
Every device has been thoroughly tested and has been shipped in perfect operating condition. Care-
fully check the shipping carton for damage that may have occurred during shipping. If the carton is
damaged, carefully inspect the device for damage, and be sure all accessories necessary to install
and operate the device have arrived intact. In the event damage has been found or parts are missing,
please contact our customer support team for further instructions. Please do not return this device to
your dealer without rst contacting customer support. Please do not discard the shipping carton in the
trash. Please recycle whenever possible.
BOX CONTENTS
Twist-Lock Power Cable (x1)
4-pin Data Cable (x1)
Rack Mount Brackets w/ Hardware (x2)
IP65 Power Cable Connector Kit (x1)
CUSTOMER SUPPORT
Contact ELATION Service for any product related service and support needs.
Also visit forums.elationlighting.com with questions, comments or suggestions.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
REPLACEMENT PARTS please visit parts.elationlighting.com
GENERAL INFORMATION
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS
FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS
MANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY
WARRANTY CLAIMS AND/OR REPAIRS.
IMPORTANT NOTICE!
4
A. Elation Professional hereby warrants, to the original purchaser, Elation Professional products to be free of
manufacturing defects in material and workmanship for a period of two years (730 days), and Elation Professional
product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of
six months (180 days), from the original date of purchase. This warranty excludes discharge lamps and all prod-
uct accessories. This warranty shall be valid only if the product is purchased within the United States of America,
including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by
acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the Elation Professional factory. All shipping charges must be pre-
paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation
Professional will pay return shipping charges only to a designated point within the United States. If any product is
sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the
product. If any accessories are shipped with the product, Elation Professional shall have no liability what so ever
for loss and/or or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modi-
fied in any manner which Elation Professional concludes, after inspection, affects the reliability of the product; if
the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior writ-
ten authorization was issued to purchaser by Elation Professional; if the product is damaged because not properly
maintained as set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic check-
up. During the periods as specified above, Elation Professional will replace defective parts at its expense, and will
absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole
responsibility of Elation Professional under this warranty shall be limited to the repair of the product, or replace-
ment thereof, including parts, at the sole discretion of Elation Professional. All products covered by this warranty
were manufactured after January 1, 1990, and bare identifying marks to that effect.
E. Elation Professional reserves the right to make changes in design and/or performance improvements upon its
products without any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the
products described above. Except to the extent prohibited by applicable law, all implied warranties made by
Elation Professional in connection with this product, including warranties of merchantability or fitness, are limited
in duration to the warranty periods set forth above. And no warranties, whether expressed or implied, including
warranties of merchantability or fitness, shall apply to this product after said periods have expired. The consumer’s
and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no cir-
cumstances shall Elation Professional be liable for any loss and/or damage, direct and/or consequential, arising out
of the use of, and/or the inability to use, this product.
G. This warranty is the only written warranty applicable to Elation Professional products and supersedes all prior
warranties and written descriptions of warranty terms and conditions heretofore published.
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authori-
zation (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief descrip-
tion of the problem as well as the R.A. number must also be written down on a piece of paper and included in the
shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items
returned without a R.A. number clearly marked on the outside of the package will be refused and returned at cus-
tomer’s expense. You may obtain a R.A. number by contacting customer support.
LIMITED WARRANTY (USA ONLY)
5
SAFETY GUIDELINES
This fixture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is
important to follow all instructions and guidelines in this manual. Elation Professional is not respon-
sible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the
information printed in this manual. Only qualified and/or certified personnel should perform instal-
lation of this fixture and only the original rigging parts included with this fixture should be used for
installation. Any modifications to the fixture and/or the included mounting hardware will void the
original manufacturer’s warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO
NOT ATTEMPT ANY REPAIRS YOURSELF. DOING SO WILL VOID YOUR
MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS
TO THIS DEVICE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND
GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND
ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG THIS UNIT INTO A DIMMER PACK
DO NOT REMOVE THE COVER UNDER ANY CONDITIONS
NEVER OPERATE THIS UNIT WITH THE CASING REMOVED
UNPLUG FROM POWER DURING LONG PERIODS OF NON-USE
DISCONNECT POWER BEFORE PERFORMING MAINTENANCE
IP65 FIXTURE IS COMPLETELY DUST TIGHT AND PROTECTED AGAINST WATER
PROJECTED BY A NOZZLE FROM ANY DIRECTION
6
For Your Own Personal Safety, Please Read and Understand This Manual Completely Before
You Attempt To Install Or Operate This Unit!
• Be sure to save the packing carton in the unlikely event the device may have to be returned for
service
• Be sure that the local power outlet matches the required voltage for the device
• Do not open up the device under any conditions. There are no user serviceable parts inside
• Disconnect the device’s main power when left unused for long periods of time
• Never connect this device to a dimmer pack
• Do not attempt to operate this device if it has been damaged in any way
• Never operate this device with the cover removed
• Do not attempt to operate this device if the power cord has been frayed or broken. Do not attempt
to remove or break o the ground prong from the electrical cord. This prong is used to reduce the
risk of electrical shock and re in case of an internal short
• Disconnect from main power before making any type of connection
• Never block the ventilation holes. Always be sure to mount this device in an area that will allow
proper ventilation. Allow about 6” (15cm) between this device and a wall
• Always mount this unit in a safe and stable matter
• Please route your power cord out of the way of foot trac. Power cords should be routed so they
are not likely to be walked on, or pinched by items placed upon or against them
• Keep ammable materials away from this xture!
• IP65 Rating: Fixture is dust-tight, and protected against water projected by a nozzle from any
direction. FIXTURE IS NOT PROTECTED AGAINST IMMERSION IN LIQUID OF ANY KIND!
• The device should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into, the device.
C. The device has been immersed in liquid or exposed to powerful water jets or sprays.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
SAFETY GUIDELINES
7
1. Mode Button
2. Display Screen
3. Up Button
4. Setup Button
5. Down Button
6. Underside Mounting Point
7. Topside Mounting Point
8. Safety Cable Attachment
9. Power In
10. Power Out
11. LED Out
12. Net Data In
13. Net Data Out
14. Rack Mount Brackets (x2)
OVERVIEW
8
FLAMMABLE MATERIAL WARNING!
Keep drive a minimum of 5.0 feet (1.5m) away from ammable material and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualied electrician should be used for all electrical connections and/or installations.
DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!
The driver MUST be installed following all local, national, and country commercial electrical and
construction codes and regulations.
Before installing or mounting any device, a professional equipment installer MUST be consulted to
determine whether the mounting structure or surface is properly certied to safely support the com-
bined weight of the device and any relevant accessories.
The device should be installed in areas outside walking paths, seating areas, or away from areas
where unauthorized personnel might be able to reach the device by hand.
INSTALLATION
9
INSTALLATION
RACK MOUNTING
This device can be rack mounted using the removable mounting brackets located on each side of
the device. Make sure to use mounting hardware that fits the mounting holes on the device as well
as the rack itself. Use all four (4) points on the mounting brackets to ensure that the device is mount-
ed securely. Please see the illustration below for reference.
10
Otros manuales para PIXEL DRIVER 1000IP
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de Elation
Elation
Elation PIXEL DRIVER 4000 Manual de usuario
Elation
Elation ELAR-DRIVER-8-12V Manual de usuario
Elation
Elation T4 Manual de usuario
Elation
Elation PIXEL DRIVER 1000IP Manual de usuario
Elation
Elation SDC-6 V2 Manual de usuario
Elation
Elation eNODE 4 Manual de usuario
Elation
Elation E-Node 8 Manual de usuario
Elation
Elation SDC12 Manual de usuario
Elation
Elation DMX-SOLO 256 Manual de usuario
Elation
Elation DMX PARTNER 1.0 24-004-1631 Manual de usuario
