Elabs DVPS44 Manual de usuario
DVPS44
Video Wall Processor & Matrix Switch
4x4 HDMI™ Scaler
LAUNAMNOITCURTSNI
THIS PAGE IS LEFT
INTENTIONALLY BLANK
1
SAFETY AND NOTICE
The DVPS44 Video Wall Processor and Matrix Switch 4x4
HDMI™ Scaler has been tested for conformance to safety regula-
tions and requirements, and has been certied for international use.
However, like all electronic equipments, the DVPS44 should be used
with care. Please read and follow the safety instructions to protect
yourself from possible injury and to minimize the risk of damage to
the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where
explained in this manual.
• Provide proper ventilation and air circulation and do not
use near water.
• Keep objects that might damage the device and assure that the
placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection
cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning.
2
TABLE OF CONTENTS
INTRODUCTION...................................................................3
FEATURES.............................................................................4
SPECIFICATIONS...................................................................5
PACKAGE CONTENTS...........................................................6
HARDWARE INSTALLATION....................................................7
CONNECTION DIAGRAM.....................................................8
PANEL DESCRIPTIONS..........................................................10
OPERATION BY FRONT PANEL.............................................. 11
OPERATION BY REMOTE CONTROL ......................................... 13
OPERATION BY SOFTWARE CONTROL ......................................... 15
EDID LEARNING..................................………………….. ....... 18
EDID LEARNING FUNCTION......................................................22
WARRANTY..........................................................................23
3
INTRODUCTION
The DVPS44 Video Wall Processor and Matrix Switch 4x4 HDMI Scal-
er provides the most exible and cost eective solution in the market.
The new DVPS44 can be used as a conventional matrix switch, routing
up to four dierent HDMI video sources to any monitor independently
or be used as video wall processor, splitting a chosen image from one
source to four displays.
On top of that, it can work as "combo" gear, showing any individual
input source in full-screen for any selected display while other displays
are working in video wall mode.
4
Features
• HDCP compliant
• Allows any HDMI display to view any HDMI source at any time
• Supports default HDMI EDID and learns the EDID of displays
• Supports HDMI™ DVI input, from 640x480 to 1920x1200@60,
interlaced or progressive
• Four HDMI outputs from 640x480 to 1920x1200
• User-selectable output settings, up to 1920x1200
• Fast response time for channel switch
• Supports 7.1 channel digital audio
• The matrix master can switch every output channels to any HDMI
inputs by push-in button, IR remote control, RS-232 control
• Resize, position, zoom, rotation, fade-in fade-out output video
• CE labs TV Video wall processor calculator for bezel compensation
• Each HDMI output has an independent controllable display area
• Image parameters and layouts are automatically saved in ash
memory of the device and can be recalled for later use
• Several Image parameters and layouts can be saved in software
and can be loaded for later use
• Software control through RS-232
• Firmware upgradable for support of new features and technology
enhancements
• Easy installation with rack-mounting and wall-mounting designs for
master and receiver respectively
• 1U size
5
Technical
Typical usage True 4x4 Matrix, Wall Processor
Video Format Support
Video loop-out
HDCP compliance
Video bandwidth
Video support
Audio support
Input TMDS signal
ESD protection
PCB stack-up
Input
Output
USB connector
Up to 7.1ch Surround Sound of Stereo Digital Audio
HDMI/DVI
Yes
Single-link 225MHz [6.75Gbps]
480i/480p/720p/1080i/1080p60/1920x1200@60Hs 30-bit color
No
1.2 Volts [peak-to-peak]
Human body model — ± 19kV [air-gap discharge]
& ±12kV [contact discharge]
8-layer board [impedance control — dierential 100Ω; single 50Ω]
4x HDMI / 1x RS-232 / 1x Ethernet (for test)/ 1x 2.1mm power jack
4x HDMI/2x USB
Type A
RS-232 connector DE-9 [9-pin D-sub female]
RJ-45 connector WE/SS 8P8C with 2 LED indicators (Not in use)
Mechanical
Enclosure Metal case
Dimensions
[L x W x H]
173/8" x 101/4" x 13/4" [441 x 260 x 44mm]
Fixedness
203/8" x 181/4" x 53/4" [517 x 464 x 146mm]
Power supply
213/4" x 121/2" x 193/4" [570 x 580 x 260mm]
6.4 lbs (102.4 oz) [2.9 Kg]
Model
Package
Carton
9.9 lbs (158.4 oz) [4.5 Kg]
Model
Package
Weight
Operation temperature
Relative humidity
1U rack-mount with ears & wall hanging holes
12V 5A DC 2.1mm, Center pin +
32~104°F [0~40°C]
-4~140°F [-20~60°C]
20~90% RH [no condensation]
Specications
Storage temperature
HDMI connector Type A [19-pin female]
Control Remote Control (IR) / RS-232 / Front Panel Buttons
6
Package Contents
• 1x DVPS44
• 1x Power Adapter DC 12V 5A
• 1x User Manual
• 1x Installation software CD
• 1x IR Remote Control
• 1x Rack-mounting ear set
7
INSTALLATION
1. Connect all HDMI sources to the HDMI Inputs of the DVPS44 Video
Wall Processor and Matrix Switch 4x4 HDMI Scaler
2. Connect all displays (Monitors) to the HDMI Outputs of the DVPS44
3. Connect the RS232 controller cable from the DVPS44 to a PC
4. Connect the +12V 5A DC power supply to the DVPS44
Example Connection Diagram
Used as a Video Wall processor:
You can control the unit by Front panel
or
IR remote control
or
RS232.
Any of the 4 inputs may be selected to create a single image on all 4
monitors.
8
Example Connection Diagram Cont.
Used as Matrix Switch:
You can control the unit by Front panel
or
IR remote control
or
RS232.
Any of the 4 inputs may be routed to any output.
Used as Matrix Switch:
You can control the unit by Front panel
or
IR remote control
or
RS232.
Unit has 4 inputs, displays are showing 2 or 3 of the same input.
Tabla de contenidos
