090070671 - SCMAS5 - TECHNICAL MANUAL
2
FOREWORD
FOR THE INSTALLER:
Please follow carefully the specifications relative to electric and security systems realization further to the manufacturer’s
prescriptions indicated in the manual provided.
Provide the user the necessary indication for use and system’s limitations, specifying that there exist precise specifications and
different safety performances levels that should be proportioned to the user needs. Have the user view the directions indicated
in this document.
FOR THE USER:
Periodically check carefully the system functionality making sure all enabling and disabling operations were made correctly.
Have skilled personnel make the periodic system’s maintenance. Contact the installer to verify correct system operation in case
its conditions have changed (e.g.: variations in the areas to protect due to extension, change of the access modes, etc…)
-------------------------------
This device has been projected, assembled and tested with the maximum care, adopting control procedures in accordance with
the laws in force. The full correspondence to the functional characteristics is given exclusively when it is used for the purpose it
was projected for, which is as follows:
Optical-acoustic device output control module.
Any use other than the one mentioned above has not been forecasted and therefore it is not possible to guarantee the correct
functioning of the device. Similarly, any other use of this technical manual other than the one it has been compiled for — that is:
to illustrate the devices technical features and operating mode - is expressly prohibited.
The manufacturing process is carefully controlled in order to prevent defaults and bad functioning. Nevertheless, an extremely low
percentage of the components used is subjected to faults just as any other electronic or mechanic product. As this item is meant
to protect both property and people, we invite the user to proportion the level of protection that the system offers to the actual risk
(also taking into account the possibility that the system was operated in a degraded manner because of faults and the like), as
well reminding that there are precise laws for the design and assemblage of the systems destinated to these kind of applications.
The system’s operator is hereby advised to see regularly to the periodic maintenance of the system, at least in accordance
with the provisions of current legislation, as well as to carry out checks on the correct running of said system on as regular
a basis as the risk involved requires, with particular reference to the control unit, sensors, sounders, dialer(s) and any other
device connected. The user must let the installer know how well the system seems to be operating, based on the results of
periodic checks, without delay.
Design, installation and servicing of systems which include this product, should be made by skilled staff with the necessary
knowledge to operate in safe conditions in order to prevent accidents. These systems’ installation must be made in accordance
with the laws in force. Some equipment’s inner parts are connected to electric main and therefore electrocution may occur
if servicing was made before switching off the main and emergency power. Some products incorporate rechargeable or non
rechargeable batteries as emergency power supply. Their wrong connection may damage the product, properties and the
operator’s safety (burst and fire).
According to Directive 2012/19/EU on the Waste of Electric and Electronic Equipment
(WEEE), it is here specied that this Electrical-Electromechanic Device started to be
commercialized after 13th August 2005, and it shall be disposed of separately from or-
dinary waste products.
DISPOSAL INSTRUCTIONS
www.acornfiresecurity.com
www.acornfiresecurity.com
