Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
cept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
the European safety standards.
Handle with the dangerous electric voltages carefully.
With this voltage there is the danger to get a life
After taken the device from a cold room to a warm room, it is not allowed to activate the device.
possible that thereby emerged condensed water damages the device.
it reached ambient temperature.
Make sure that the voltage which i
Don’t switch the device in s
hort time intervals (e.g. in second cycle) on or off.
Keep away children and laymen off the device.
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especial
individuals whose epilepsy was determined by a doctor.
This device was developed for professional use on stages, in discos, theatres etc. The device is only
approved for a connection up to 230V 50/60 Hz AC voltage
breaks during operation increase the lifetime of your device.
or any form of forceful im
Make sure that the device is not exposed excessive heat, humidity or dust at th
Take care that no cables are lying around. You would endanger your own safety and also the safety of
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
xpected. Humidity or very high atmospheric humidity could reduce the isolation of the device
and could cause deathly electric shocks. If you use fog devices the device
direct smoke jet. There has to be a safety distance of at least
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m.
perate the device during thunderstorms. Surge volt
device from the power sup
ply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
be protected by a suitable safety
familiar with the functions of the device before start
hould not handle the device. The most cause of functional disorder is inappropriate handling.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
cept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
Handle with the dangerous electric voltages carefully.
With this voltage there is the danger to get a life
threatening electric shock.
After taken the device from a cold room to a warm room, it is not allowed to activate the device.
possible that thereby emerged condensed water damages the device.
Make sure that the voltage which i
not exceed the specified values.
hort time intervals (e.g. in second cycle) on or off.
Keep away children and laymen off the device.
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especial
individuals whose epilepsy was determined by a doctor.
This device was developed for professional use on stages, in discos, theatres etc. The device is only
approved for a connection up to 230V 50/60 Hz AC voltage
breaks during operation increase the lifetime of your device.
or any form of forceful im
pact during the installation, the start-up
Make sure that the device is not exposed excessive heat, humidity or dust at th
Take care that no cables are lying around. You would endanger your own safety and also the safety of
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
xpected. Humidity or very high atmospheric humidity could reduce the isolation of the device
and could cause deathly electric shocks. If you use fog devices the device
direct smoke jet. There has to be a safety distance of at least
0.5m between this device and the fog
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m.
perate the device during thunderstorms. Surge volt
ages could destroy the device.
ply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
be protected by a suitable safety
familiar with the functions of the device before start
up. People without the expe
hould not handle the device. The most cause of functional disorder is inappropriate handling.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
cept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
threatening electric shock.
After taken the device from a cold room to a warm room, it is not allowed to activate the device.
not exceed the specified values.
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especial
This device was developed for professional use on stages, in discos, theatres etc. The device is only
Take care that no cables are lying around. You would endanger your own safety and also the safety of
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
xpected. Humidity or very high atmospheric humidity could reduce the isolation of the device
0.5m between this device and the fog
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m.
ages could destroy the device.
up. People without the expe
hould not handle the device. The most cause of functional disorder is inappropriate handling.
