Effigis CPAT FLEX IRXD Manual de usuario

v 1.0 / 2021.02.04

Part No. 100-00011-001

CPAT FLEX Operation Manual

(IRXD)

2CPAT FLEX Operation Manual (IRXD)

This document provides information proprietary to Efgis and cannot be used or disclosed

without Efgis’ written authorization.

Efgis reserves the right to make changes without notice. Changes affecting the operation

of any component in this manual will be reected in a subsequent revision. Efgis assumes

no responsibility for any omissions or errors that may appear in this document or for any

damages that may result from the use of information contained herein.

IRXD User Manual

First edition (v1.0): February 2021

Part No. 100-00011-001

Published by:

Efgis

4101 Molson St., Suite 400

Montreal, Quebec

CANADA H1Y 3L1

Sales and Support Team

1 514 495-0018 | 1 888 495-6577 | cpat@efgis.com

www.cpatex.com

Contents

1. General Information ............................. 5

1.1 About this Manual ......................................5

1.2 Certications..........................................5

1.2.1 TEMC Compliance .................................5

1.2.2 Safety Compliance ................................5

1.2.3 Note ...........................................5

1.3 Technitial Support ......................................6

1.4 Calibration ...........................................6

1.5 Explanation of Symbols Used ..............................6

1.6 Efgis Website. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2. Ingress Detection in R-PHY ...................... 7

3. System Components ............................ 7

3.1 Initial Verication .......................................8

4. Physical Installation ............................. 9

4.1 Rack Mounts Installation .................................9

4.2 Electrical Installation ...................................10

4.3 CCAP and P1~P8 Ports.................................10

4.4 Internet Port .........................................10

4.5 USB Port............................................10

5. Setup ........................................ 10

5.1 Internet Port .........................................10

5.2 CCAP Port...........................................10

5.3 P1~P8 Ports.........................................10

5.4 NDR Conguration.....................................11

6. System Operation.............................. 11

6.1 Power On ...........................................11

6.2 LED and LCD Information................................11

6.3 Communication.......................................12

6.4 Shutdown ...........................................12

6.4.1 Normal Mode Shutdown ...........................13

6.4.2 Force Mode Shutdown.............................13

7. System Maintenance ........................... 13

7.1 Cleaning of the Equipment ...............................13

efgis.com

CPAT FLEX Operation Manual (IRXD)

Contents

1. General Information ............................. 5

1.1 About this Manual ......................................5

1.2 Certications..........................................5

1.2.1 TEMC Compliance .................................5

1.2.2 Safety Compliance ................................5

1.2.3 Note ...........................................5

1.3 Technitial Support ......................................6

1.4 Calibration ...........................................6

1.5 Explanation of Symbols Used ..............................6

1.6 Efgis Website. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2. Ingress Detection in R-PHY ...................... 7

3. System Components ............................ 7

3.1 Initial Verication .......................................8

4. Physical Installation ............................. 9

4.1 Rack Mounts Installation .................................9

4.2 Electrical Installation ...................................10

4.3 CCAP and P1~P8 Ports.................................10

4.4 Internet Port .........................................10

4.5 USB Port............................................10

5. Setup ........................................ 10

5.1 Internet Port .........................................10

5.2 CCAP Port...........................................10

5.3 P1~P8 Ports.........................................10

5.4 NDR Conguration.....................................11

6. System Operation.............................. 11

6.1 Power On ...........................................11

6.2 LED and LCD Information................................11

6.3 Communication.......................................12

6.4 Shutdown ...........................................12

6.4.1 Normal Mode Shutdown ...........................13

6.4.2 Force Mode Shutdown.............................13

7. System Maintenance ........................... 13

7.1 Cleaning of the Equipment ...............................13

4CPAT FLEX Operation Manual (IRXD)

8. Real-time Ingress Monitor (RIM).................. 13

8.1 Login the RIM ........................................13

8.2 Choose the Proper ITX ..................................15

9. Updates and Recovery ......................... 16

9.1 Automatic Update .....................................16

9.2 Manual System Recovery................................17

10. Remote Troubleshooting ....................... 17

Appendix A – Specications........................ 17

A.1 Electrical Specications .................................17

A.2 Physical Specications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Appendix B – Our Services......................... 18

B.1 Customer Support .....................................18

B.1.1 Equipment Return Instructions .......................18

B.2 Limited Product Warranty................................19

B.2.1 Hardware ......................................19

B.2.2 Software.......................................19

B.2.3 Exclusions .....................................19

B.2.4 Refurbished Parts and Prior Testing ...................20

B.2.5 Exclusive Remedies...............................20

B.2.6 Disclaimer .....................................20

efgis.com

CPAT FLEX Operation Manual (IRXD)

1. General Information

1.1 About this Manual

This manual describes the components, installation and operation of the CPAT FLEX IRXD

unit.

You will nd important safety information in this manual. We strongly recommend that all

users read this manual. Use of this product other than for its intended application may

compromise the unit’s safety features.

1.2 Certications

This section describes the certications the IRXD complies with.

1.2.1 EMC Compliance

FCC part 15 subpart B (2019)

ICES-001 - Issue 5(2020)

CISPRE11(2015) A1(2016) and EN61326-1(2013)

1.2.2 Safety Compliance

CSA22.2 No 662368-1:14

UL 62368-1

UL 62368-1:2014

1.2.3 Note

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause

undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if it is not

installed and used in accordance with the instruction manual, it may cause

harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his owns expense.

8. Real-time Ingress Monitor (RIM).................. 13

8.1 Login the RIM ........................................13

8.2 Choose the Proper ITX ..................................15

9. Updates and Recovery ......................... 16

9.1 Automatic Update .....................................16

9.2 Manual System Recovery................................17

10. Remote Troubleshooting ....................... 17

Appendix A – Specications........................ 17

A.1 Electrical Specications .................................17

A.2 Physical Specications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Appendix B – Our Services......................... 18

B.1 Customer Support .....................................18

B.1.1 Equipment Return Instructions .......................18

B.2 Limited Product Warranty................................19

B.2.1 Hardware ......................................19

B.2.2 Software.......................................19

B.2.3 Exclusions .....................................19

B.2.4 Refurbished Parts and Prior Testing ...................20

B.2.5 Exclusive Remedies...............................20

B.2.6 Disclaimer .....................................20

6CPAT FLEX Operation Manual (IRXD)

Modications: Any modications made to this device that are not approved by Efgis Geo-

Solutions Inc., may void the authority granted to the user by the FCC to operate this equipment.

1.3 Technical Support

Efgis Technical Support Service is available from Monday through Friday from 9:00 AM to

5:00 PM Eastern Time.

Toll free from U.S. and Canada: + 1 888 495-6577

International: + 1 514 495-0018

Fax questions anytime to: + 1 514 495-4191

cpat@efgis.com

1.4 Calibration

Your IRXD unit has been calibrated and tested in the factory, and does not need further

calibration before use.

However, if the unit suffers damage and needs repair, it is recommended that the unit be

return to an authorized Efgis service center there it will be properly re-calibrated.

As well, if your company requires regular calibration of all equipment, or requires a calibration

certicate for the IRXD, a calibration service is available through Efgis.

For more information on calibration services, please contact your Efgis representative.

1.5 Explanation of Symbols Used

The following symbols are used in this Manual:

Symbol Explanation

!Direct current. (DC)

!Caution. Indicates that operations or procedures, if carried out without caution,

may cause personalinjury or damage to the unit.

/Note. Indicates additional information about the product.

1.6 Efgis Website

Efgis’ website contains product specications, information, press releases, brochure

download and Frequently Asked Questions (FAQs). Please visit our website at:

www.cpatex.com

efgis.com

CPAT FLEX Operation Manual (IRXD)

2. Ingress detection in R-PHY

The IRXD is installed in the headend or data center where the elements of the CCAP core

reside. When a vehicle (patrol mode) is driving in a ingress prone area, the Portable ITX2 test

signal enter the coaxial plant and travel up to the RPD. The RPD converts the ITX2 signal from

analog to digital. The converted signal is then transmitted back to the IRXD by UDP and TCP/

IP over Ethernet via NDR OOB channels (Narrowband Digital Return Out Of Band).

Once identied, the signal is decoded and measured by the IRXD, and the information is

forwarded to the CPAT WEB Cloud application, which in turn will precisely log the geographical

location of capture points in post processing. Readings are also available remotely in real

time through the RIM service (see section 8 - RIM).

3. System Components

The IRXD is the receiver part of a nd-and-x ingress and monitoring solution for broadband

operators. It detects signal transmitted over the air via the ITX2 that enters the cable network.

The IRXD Ethernet ports are fed by the Remote PHY devices. The main operating status

is displayed on the LCD located on the front panel. Once installed, it requires no further

intervention to monitor and transmit results via the CPAT WEB Cloud application.

This section describes the IRXD unit in detail including its accessories, and helps you get

started by explaining the features, the powering and data interface of the unit.

HUB / HEADEND

INTERNET

IPRPD

RPD IP

IRXD

CPAT WEB

CCAP

CORE

ITX2 ID#1

ITX2 ID#2

FIBER NETWORK

COAXIAL NETWORK

CIN

(CONVERGED

INTERCONNECT NETWORK)

8CPAT FLEX Operation Manual (IRXD)

3.1 Initial Verication

Your IRXD unit is calibrated, and ready to use right out of the box. Upon reception, visually

inspect each item for any damage that may have occurred during shipping. If you see any

signs of physical damage, please contact Efgis:

• Callers from the U.S. and Canada can dial + 1 888 495-6577 (toll-free number).

• International callers can dial + 1 514 495-0018.

Make sure no items are missing. Your package should contain all the standard items as well

as any accessories you may have ordered. The IRXD - Ingress receiver digital, the following

items are included:

• IRXD rack mount unit.

• 2 Rack mount right angle brackets.

• Power cord.

• User manual-downloadable via our CPAT WEB application resource centre.

Figure 1: IRXD, rack mount brackets and power cord

If any of the standard accessories are lost or damaged, you can order a replacement for the

IRXD. Please quote the following part numbers when placing an order:

Part No. Accessory Description

(1) 100-00019-001 Power cord

(2) 100-00011-001 IRXD Operation Manual (This guide)

To place an order, please call Efgis at + 1 888 495-6577 or + 1 514 495-0018 or via

email cpat@efgis.com

4. Physical Installation

4.1 Rack Mounts Installation

CAUTION!

Leave space for front, back and lateral ventilation.

efgis.com

CPAT FLEX Operation Manual (IRXD)

4. Physical Installation

4.1 Rack Mounts Installation

CAUTION!

Leave space for front, back and lateral ventilation.

1 2

10 CPAT FLEX Operation Manual (IRXD)

4.2 Electrical Installation

The AC/DC adapter is included within the equipment. It is compatible with 110 V/220 V

voltages and 50/60 Hz power distribution networks.

4.3 CCAP and P1~P8 Ports

P1~P8 and CCAP ports are connected on the internal network. CCAP port communicates

with CMTS/CCAP by SNMP. P1~P8 receives L2TPv3 packets from congured RPD.

4.4 Internet Port

The IRXD needs access to the Internet to transmit received measurement level to the

CPAT WEB application and for automatic rmware updates. Transfers vary from less than

a 1MBytes to a maximum of ~7 Mbytes per day depending of the amount of the patrolling

(drive out), the number of ITX2’s in the sector and the number of ingress events detected on

the network.

The IP (v4 or v6) address is acquired with the use of DHCP. If no DHCP server is present on

the network, the system will not be able to transmit data over the network.

4.5 USB Port

Used for troubleshooting or maintenance.

5. Setup

5.1 Internet Port

Make sure that the Internet port has an access to the Internet and that the FTP port 21,

SFTP TCP port 22, remote assistance TCP port 26 and RIM UDP port 20000 are opened

(outgoing). Without this access, it won’t be able to communicate with our FTP/SFTP and

“Realtime Ingress Monitor” servers (RIM) and we won’t be able to access the IRXD for remote

assistance.

5.2 CCAP Port

Make sure that the CCAP port has an access to the SNMP port of CMTS/CCAP. This port

needs a static IP address.

5.3 P1~P8 Ports

These ports need static IP addresses.

Tabla de contenidos

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario