23 hours 59 minutes can be set as maximum.
When setting time, press the button, and then + or - button, until the required time shows on the screen. After
the setting, the correct time (hour, minute) and the button will show on the screen and timing begins
immediately. Whenever press the button, timing will be seen. When the set time comes, disappears and
the alarm ring again. It will disappear after pressing the button.
Notice: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the
set process as well as the real time (hour, minute) will disappear. After the power is on again, three“0”and
“AUTO”shows on the screen, then it is supposed to do the resetting.
3-keys timer procedure baking mode (only available on certain models)
Adjust the clock after switch on:
Once it connected with electrical power, the display will show “12:00” with the square symbol above “ ”;
Press the “+” or “-” button, increase or decrease the number until it reaches the right time; after 5 seconds it can
work properly, or you can press the function button to make it work.
Automatic setting (set the time of full automatic starting and ending)
1. Press the function button repeatedly until the square symbol above the “ ” flashes, and press “+” or “-”
button to set the time frame of baking;
2. Press the function button repeatedly until the square symbol above the “ ” flashes, and press “+” or “-”
button to set the time switch off;
3. Adjusting the constant temperature button and choosing button to set temperature and baking method.
After these setting, the symbols above the “ ” and “ ” flash, it indicates the baking procedure of oven has
been set.
For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.
Press the function button repeatedly until the square symbol above “ ” flashes, and set the time frame of
baking be 45 minutes;
Press the function button repeatedly until the square symbol above “ ” flashed, and set the end time of baking
at 14:00.
After these setting, the proper clock (hour, minute) and the square symbol will show on the display, it indicates the
setting of baking procedure has been remembered automatically.
When the clock shows at 13:15 (between 14 -15min), the oven will switch on automatically.
During the baking time frame, the square symbol will keep flashing.
When the clock shows at 14:00, baking will switch off automatically. And the alarm ringing, the square symbol
flashes, the ringing will be disappeared by press any button.
Semi-automatic setting (set the time of automatic starting and ending)
A. setting the time frame of baking (10 hours longest)
Press the function button repeatedly until the square symbol above “ ”, and set the time frame of baking;
Switch on the oven immediately, the square symbol above “ ” begins to flash. When the baking off, its
procedure will switch off automatically. The square symbol above “ ” flashes, and alarm rings, the ringing will
be disappear by press any button.
B. setting the end time off baking (23hours and 59minutes longest)
Press the function button repeatedly until the square symbol above “ ” flashes, and set the end time of
baking;
Switch on the oven immediately, the square symbol above “ ” begins to flash. When it reaches the time set,
baking procedure will switch off automatically. The square symbol above “ ” flashes,
And the alarm ringing, the square symbol flashes, the ringing will be disappeared by press any button.
The settled baking procedure could be seen by pressing any function button repeatedly at anytime, if only the
time frame of baking is decreased to “0” position or adjusting the end time of baking to the current time, the
settled baking procedure can be cancelled.
Timer
The longest time frame can be set is 23 hours and 59 minutes. For setting time, press the function button
repeatedly until the square symbol above “ ” flashes, and press “+” or “-” button until the time supposed shows
on the display. After
setting, the proper time (hour, minute) and the square symbol above the “ ” begins to flash. In addition, the
time
countdown begins to work. When it reaches the settled time, the square symbol above the “ ” flashes, and the
alarm ringing, the square symbol flashes, the ringing will be disappeared by press any button.
Notice: press the relevant button, the setting must be carried out in 5 seconds; if electricity failure suddenly, all
the settled procedure and the proper clock time (hour, minute) will disappear.
After electrical power connected again, “12:00” and the square symbol above “ ” will show on the display, you
