1) The appliance surface is HOT when in use so please use with caution, as it is a heating appliance.
2) DO NOT RUN THE CORD BEHIND THE HEATER.
3) In order to avoid overheating, do not cover the heater with anything, including wet or dry washing. Covering
the panel could result in a fire hazard.
4) EEZIHEAT Wall Panel Heaters are for wall mount only on hard wall or standard gollow wall and should under
no circumstances be used as freestanding heaters.
5) The surface of the appliance is “safer” to touch due to its low thermal conductivity. However, an infant or a
baby or any person with reduced physical, sensory or mental capabilities or lack of experience or knowledge
should not be left unattended as prolonged contact with the surface may result in an injury as the surface is
still hot.
6) This is appliance is NOT suited for use in a bathroom and is for indoor use ONLY for heating a room.
7) The appliance is fitted with a 2-core cable only, any modification of the cable or removal of the factory fitted
plug voids the warrantee of the product.
8) Before drilling into the wall, check that the area is free of pipes or electrical wires embedded into the wall.
9) The appliances should not be located below or in front of an electrical socket or in close proximity to flammable
material or substances. Note some wallpaper glues may not be resilient to elevated temperatures.
10) When switching on the heater for the first time, there may be a slight odor during the first day or two. This is
quite normal and is caused by the residual moisture in the panel and does not present any health hazard.
11) This product is not intended for use by persons (including children & other entities i.e. Animals) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
12) Children or other entities should be supervised to ensure that they do not play with or damagethe appliance.
13) The EEZIHEAT SMART Panel Heaters are manufactured to withstand a consistent electricity supply of
between 230 – 240VAC. Customers in regions that frequently experience surges/spikes or erratic power
supply are advised to use a surge protector with our appliance. Our warrantee does not cover damage as a
14) EEZIHEAT-HEATERS HAS NO USER SERVICEABLE PARTS INSIDE and should only be opened by
15) To disconnect the heater from the wall socket, please only pull on the plug socket and not the cord to remove
the socket from the wall.
16) ONLY USE EXTENTION CORDS where needed of 10Amps or more and do not run the extensions under
carpeting, throw rugs, runners or similar coverings and arrange the cord in such a way to avoid tripping over
17) This product is ONLY for indoor use and only for heating a room with no flammable material or substance in
close proximity to the heater.
18) Only the provided fixing accessory kit should be used for mounting.
19) In the rare instance that a heater develops very minor hairline cracks this will NOT normally be considered a
warrantable item. If this does occur, the Safety and performance of the heater will not be affected by cosmetic
20) The customer shall be responsible for all costs incurred in the removal or reinstallation of the products,
including but not limited to labor costs and shipping costs to return the heater to the EEZIHEAT-Heaters
service center. Within the limitations of this warranty and at the discretion of EEZIHEAT, we will repair or
21) The product can be painted to match the décor in the room with no-odour, non-oil based paint. Water based
paints are advisable.
22) For FAQ please visit our website www.marcltd.com
