Edimax GS-5008E Manual de usuario

GS-5008E

User Manual

11-2021 / V1.0

Contents

I. Product Information.................................................1

I-1. Package Contents....................................................................... 1

I-2. Hardware Interface .................................................................... 2

I-3. LED Status.................................................................................. 2

II. Installation ..............................................................3

II-1 Connecting to Network............................................................... 3

II-2 Starting the Web-based Configuration Utility ............................. 4

II-3 Launching the Configuration Utility ............................................ 4

III.Web-based Switch Configuration .............................6

III-1 System Information.................................................................... 6

III-2 Management ............................................................................. 7

III-3 Port ........................................................................................... 8

III-4 VLAN.........................................................................................10

III-5 Link Aggregation.......................................................................11

III-6 Port Mirroring...........................................................................12

III-7 QoS...........................................................................................13

III-7-1. Disable QoS.........................................................................13

III-7-2. Port-Based QoS ...................................................................14

III-7-3. IEEE 802.1p QoS...................................................................15

III-8 Broadcast Storm Control ...........................................................16

III-9 Rate Limiting.............................................................................17

III-10 Loop Detect/Prevent .................................................................18

III-11 IGMP Snooping .........................................................................19

III-12 Password ..................................................................................20

III-13 Logout ......................................................................................21

I. Product Information

The Edimax Pro GS-5008E web-smart switch equipped with 8 Gigabit Ethernet

ports and rich web managed functions. This switch provides high-speed and

reliable data transfer ideal for network connectivity in the home, small office,

small-and-Medium business and enterprise environments.

You can find all supporting documents from the link below or via QR Code:

https://www.edimax.com/download

(Once you’ve visited the Edimax official website, please enter model no.

“GS-5008E”into the search box to search for your product.)

I-1. Package Contents

GS-5008E

Power Adapter

(5V)

Quick Installation

Guide

I-2. Hardware Interface

I-3. LED Status

LED

Color

Status

Description

PWR/SYS

Green

The switch is powered on

Flashing

The switch is booting up

Off

Power is disconnected or failed

Port 1-8

(LINK/ACT)

Amber

The Port is connected, Link at

10/100M

Flashing

Sending or receiving data

Off

The Port is disconnected or link

failure

Green

The Port is connected, Link at

1000M

Flashing

Sending or receiving data

Off

The Port is disconnected or link

failure

No.

Description

Reset

PWR/SYS

LAN Port x 8, LED (LINK/ACT)

DC Power Jack

II. Installation

Read the following topics and perform the procedures in the correct order.

Incorrect installation may cause damage to the product.

II-1 Connecting to Network

1. There are two ways to physically set up the switch.

˙Place the switch on a flat surface.

˙Wall-mount the switch. The product is designed with wall-mounted

holes. (The wall-mounted mounting screws and accessories are not

included.)

2. Connect the power adapter to the switch and the power outlet.

(Note: Make sure that the "PWR" LED is green.)

3. Plug the standard Cat5e Ethernet cable into the LAN port and connect it to

the computer and prepare for web-based configuration. (Note: Make sure

that the "LAN" LED is green or amber.)

4. Connect any networking device to the switch via Ethernet cable. (Note:

Make sure that the "LAN" LED is green or amber.)

5. Connect the router to the switch via Ethernet cable. (Note: Make sure that

the "LAN" LED is green or amber.) The hardware installation is complete!

２

３

４

Wall-Mount

Power On

Computer

Network Device

Router

II-2 Starting the Web-based Configuration Utility

This section describes how to navigate the web-based switch configuration

utility through web browser. Be sure to disable any browser pop-up blocker.

Browser Restrictions

If you are using older versions of Internet Explorer, you cannot directly use

an IPv6 address to access the device. You can, however, use the DNS

(Domain Name System) server to create a domain name that contains the

IPv6 address, and then use that domain name in the address bar in place

of the IPv6 address.

If you have multiple IPv6 interfaces on your management station, use the

IPv6 global address instead of the IPv6 link local address to access the

device from your browser.

II-3 Launching the Configuration Utility

1. Make sure your computer is connected with the switch then open a web

browser.

2. Enter the IP address of the switch you are configuring in the address bar

on the browser (factory default IP address is 192.168.2.1) and then press

Enter. Please make sure that your computer's IP address is in the same

subnet as this switch. The default IP address is an IP address in the range

of 192.168.2.X (X=2-254). You can modify the IP address of your

computer if you need.

Default IP

192.168.2.1

Default User Name

admin

Default Password

1234

3. The default username is “admin”and the default password is “1234”.

4. The first time that you log in with the default username and password,

you are required to set a new password.

III.Web-based Switch Configuration

The Web Smart switches provide rich functionalities. This chapter describes

how to use the web-based management interface (Web UI) to configure the

switch’s features.

III-1 System Information

This page shows system current information. It also allows user to edit some

system information.

To change the “Device Name”, click on the table title to edit.

Enter the new device name and click the “Apply”button

Item

Description

Model Name

Model name of the switch.

Device Name

System name of the switch. The Device name can be

modified.

Firmware

Version

Current running firmware image version.

MAC Address

Base MAC address of the switch.

IPv4 Address

Current system IPv4 address.

Subnet Mask

A 32-bit number that masks an IP address

Gateway

TCP / IP protocol under the gateway

Loop Status

Displays whether or not loops exist in the network

PoE Status

Display PoE status

III-2 Management

Use the Management Access pages to upgrade firmware, restore or backup

the configuration and configure settings of management access.

Tabla de contenidos

Otros manuales de Cambiar de Edimax

Edimax

Edimax GS-1026 Manual de usuario

Edimax

Edimax EK-PSK4 Manual de usuario

Edimax

Edimax EU-4306 Manual de usuario

Edimax

Edimax 5/8 Ports Desktop Manual de usuario

Edimax

Edimax ES-5816PHG Manual de usuario

Edimax

Edimax RAS108 Manual de usuario

Edimax

Edimax ES-5160G+ Manual de usuario

Edimax

Edimax ES-3305P V2 Guía de referencia

Edimax

Edimax EK-16RE Manual de usuario

Edimax

Edimax EK-08RE Guía de referencia

Edimax

Edimax EK-2U2CA Manual de usuario

Edimax

Edimax EK-PS2C Manual de usuario

Edimax

Edimax ES-5224RS+ Manual de usuario

Edimax

Edimax EK-PA2C Manual de usuario

Edimax

Edimax ES-5160G+ Manual de usuario

Edimax

Edimax 16 Port Nway Fast Ethernet PoE Web Smart... Manual de usuario

Edimax

Edimax ES-5224RM Manual de usuario

Edimax

Edimax EK-PS2C Guía de referencia

Edimax

Edimax GS-5654LX Manual de usuario

Edimax

Edimax EU-HB4M Manual de usuario

Edimax

Edimax ES-3305P V2 Manual del propietario

Edimax

Edimax ES-5808PHG Manual de usuario

Edimax

Edimax ES-3116RL Manual de usuario

Edimax

Edimax EK-PAK2 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario