Edimax EU-PC2C Manual de usuario

Otros manuales para EU-PC2C

1

Tabla de contenidos

Otros manuales de Cambiar de Edimax

Edimax

Edimax ES-3305P V3 Manual de usuario

Edimax

Edimax SP-1101W Manual de usuario

Edimax

Edimax ES-5800G V3 Manual de instalación y operación

Edimax

Edimax GS-1026 Manual de usuario

Edimax

Edimax EK-16RE Guía de referencia

Edimax

Edimax GS-3008P Manual de usuario

Edimax

Edimax EU-HB4M Manual de usuario

Edimax

Edimax ES-3205P Manual de usuario

Edimax

Edimax ES-3105P Manual de usuario

Edimax

Edimax ES-1008PL Manual de usuario

Edimax

Edimax EK-16RE Hoja de instrucciones

Edimax

Edimax GS-5654LX Manual de usuario

Edimax

Edimax ES-3316P Manual de usuario

Edimax

Edimax ES-5160G V2 Manual de usuario

Edimax

Edimax EU-HB4S Manual de usuario

Edimax

Edimax EK-PS2C Guía de referencia

Edimax

Edimax ES-5816PHG Manual de usuario

Edimax

Edimax GS-1008P Manual de usuario

Edimax

Edimax EK-PAK2 Manual de usuario

Edimax

Edimax ES-5844P Manual de usuario

Edimax

Edimax GS-5208PLG V2 Manual de usuario

Edimax

Edimax Rackmount Fast Ethernet Switch Manual de usuario

Edimax

Edimax ES-5824PH Manual de usuario

Edimax

Edimax ES-5500G Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

EU-PC2C

User’s Manual

2Port USB 2.0 Cardbus

-1 -

Contents

1.0 USB Port Features ………………………………….P.3

2.0 System Requirement ………………………………….P.3

3.0 Driver Limitations ……………………………………..P.3

4.0 Driver Installation (Windows XP)……………………….P.4

5.0 Driver Installation (Windows 2000)………………….P.10

6.0 Driver Installation (Windows ME)……………………P.16

7.0 Driver Installation (Windows 98/98SE)………………P.19

-2 -

Introduction

Add a USB Cardbus device to your PC

Instantly add USB peripherals to your Notebook. Never open your computer case again after you have

your USB Port (PCMCIA) card installed and say good-bye to confusing cables.

The USB Port (Universal Serial Bus) allows you to instantly connect USB devices to your computer.

The USB Port will allow you to attach 2 USB devices instantly.

You never have to worry about running out of slots in your computer or those confusing IRQ’s again.

You can also “Hot Swap” your USB devices. What does this mean? You never have to power down

your PC to install hardware again. Gamers can switch joysticks on the fly. Welcome to the USB

Revolution.

1.0 USB Port Features

The CardBus is the trade name for an advanced PC Card (also known as PCMCIA

card) specification. It fits in a slot like a conventional PC card and 32-bit path is used

for data transfer. It supports the following I/O features:

•2 USB ports (root hub and two or four down stream function ports)

•Auto detect speeds and connections of devices

•Support High Speed Data Transfer Rates of up to 480 Mbps

•Integrated physical layer transceivers

•Normal and low power operating modes

•Fully Plug and Play compatible

•OHCI (Open Host Controller Interface) specification V1.0 register compatible

•USB specification V.1.0 compatible

•Provide one USB power cable

** If you use PCMCIA USB card. At normal time, you don’t need to use the USB power cable that you

connect to USB devices. Only in one case that system request more power and please use

that!

2.0 System Requirements

This setup program will install the driver for NEC USB 2.0 Host Controller. Before you

start to run the setup program, please make sure your computer is an IBM

PC-compatible system.

-3 -

This driver can be used either the following operating systems:

lWindows98

lWindows98 Second Edition.

lWindows Millennium.

lWindows 2000.

lWindows XP.

3.0 Driver Limitations

Current limitations of the driver are: Composite devices and Hi-Speed Isochronous Transfers are

currently not supported.

4. Driver Installation (Windows XP)

1. Please make sure this PCI/PCMCIA card has been installed on your system

correctly.

When starting Windows XP, it will display the follow screen, please select “Install

from a list or specific location [Advanced]”.

-4 -

-5 -

2. Insert the “Driver CD”into the CD-ROM and select the “Include this location in the

search”. Please use the Browse to change the path to “your cdrom

driver:\USB\Item\98 me 2k xp”.

-6 -

3. When display Hardware Installation screen, Press “Continue Anyway”.

4. Wait a moment to install files into your system. Then press “Finish”.

-7 -

5. To check your device from “Device Manager”. Press “Start?My

Computer?Properties”.

-8 -

6. Open “Device Manager”and check if your device works.

-9 -

7. Note! If there is a yellow exclamation mark on “NEC PCI to USB Enhanced Host

Controller”or “USB 2.0 Root Hub Device”, please remove this item from the

“Device Manager”by clicking the “Uninstall”button and click “Refresh”to re-install

this driver again.