Edge10 W193 Manual de usuario
0
Advanced Display Systems
LCD Monitor User Manual
Model:W193/W223/W243/W243h
Note: The W243h with adjustable stand.
The display comes with a three years on site warranty.
To activate your warranty please register your display at
www.edge10.com/support
1
INTRODUCTION
Thank you for purchasing this LCD monitor produced by our
company. This monitor uses a TFT (thin film transistor) liquid
crystal display (LCD) panel, and it’s designed with high quality
and highly efficient production technology to provide a more
professional and consistent image quality to the user. Besides,
this TFT LCD monitor is designed to save space and to offer
different display positions, complying with the living space of
modern age. Please read the instructions and precautions in this
booklet before you start to use it.
Features
Uses TFT (thin film transistor) active matrix color LCD (liquid
crystal display) panel. Offers high resolution image.
Elegant ultra-slender with small footprint saves more space for users.
Complies with the latest standard of European ergonomics.
5ﾟforward and 15 ﾟbackward tilt flexibility lets you adjust to the most favorable
angle.
Low power consumption, low heat and zero radiation emission protect the user.
Check Package Content
After you open the package, make sure the following items are
included. If anything is missing or damaged, please contact your
local dealer or supplier:
TFT LCD Monitor
User’s manual
Power Cord
VGA Cable
Audio Cable
2
Precautions
Please read the following instructions carefully first to prevent unnecessary
hazards. This manual should be retained for future reference.
0Before you clean or move this monitor, make sure it is power off and the AC
power cord is unplugged, so as to avoid accidental injury to the monitor or
human body.
0Please keep the radiator at the back of the monitor unobstructed.
0Keep the monitor away from any liquid.
0Some of the components and parts carry high voltage. To avoid unnecessary
danger, please don’t disassemble the monitor yourself.
0If smoke comes out from the monitor, please disconnect the power
immediately and get in touch with your local dealer.
0Please don’t apply pressure onto the screen panel to avoid permanent
damage.
0Before you clean this monitor, please make sure the AC power cord is
removed first, and please don’t spray liquid cleaner onto the unit directly.
Clean the screen with a slightly dampened rag gently without applying
excess pressure.
3
¾Installation of the Monitor
Please switch off the power supply to the computer and its peripheral
equipments first.
1. Connect the power cord to the AC power input socket at the back
of the unit, and connect the other end to the AC power socket.If
using an external power supply,you need to connect the AC power
cord to the external power supply and connect the DC plug in to
the DC socket at the back of the unit. Next connect the AC mains
plug to the AC power socket.
2. Connect the VGA Analog Signal Cable to the 15-pin connecting
port of the unit.
3. Turn on the screen and the power supply of the computer.
¾Front Control Panel :
Tilting and Swiveling of the Screen
You can tilt the panel up by 15 ﾟor down by 5 ﾟ.
4
OSD (On-Screen Display) Adjustment Control
Step 1: Press “menu” to activate the OSD on-screen display menu.
Step 2: Press “ ▼”or“▲”key to move the cursor to select the function.
Step 3: Press “source” to open the input source OSD menu
Step 4: Press “+”or “-”ke y to mov e th e c ur sor t o adjust the volume.
Quick Menu Functions
.
You can press “ ▼”or“▲” to adjust
Bright Contrast To adjust the brightness and contrast of the background.
Volume To adjust the volume of the speakers.
Color To adjusts the parameters for red, green and blue
colors on the screen.
Image Config To adjust the vertical and horizontal positions of the screen.
OSD menu To set the position of OSD display status automatically.
VGA/DVI To select the signal source option （D-SUB or DVI）
Language To select English, Traditional Chinese , French, German, Italian,
Spanish, Polish and Korean for OSD language display on your
own preference. The user can select a preferred language.
Exit To quit from the OSD Menu.
5
Secondary Menu Settings
Bright Contrast
To adjust the brightness and contrast of the background.
Function Description
Press “+”or “-” key to adjust the numerical level of brightness (0~100). Press
“menu” key to save and menu key return to the previous page.
Press“+”or “-” key to adjust the numerical value of contrast (0-100). Press
“menu” key to save and menu key return to the previous page.
Press “menu” key to select the display mode （4:3 or 16:10）
6
Back to the previous menu.
Volume
To adjust the volume of the speakers.
Function Description
Press “+”or “-” key to adjust the volume, and press “menu” key to
save and return to the previous page.
Press “menu” key to turn the speaker on or off.
7
Back to the previous page.
Color
Press “▼”or“▲” key to choose the function, and press “menu” key
to make adjustment.
Image
Config
Press “ ▼”or“▲” key to select a function, and press “menu” key to enter the
adjustment menu. After the adjustment is finished, press “menu” key to save and
“source” key exit.
Function Description
Press the “menu” key to adjust H/V positions, clock and phase automatically.
When there is distortion between characters, press “+”or “-” key to
correct this problem.
Press “+”or “-” k ey t o adjust the ADC sampling real image value.
Press “+”or “-” key to move the screen right or left.
8
Press “+”or “-” key to move the screen up or down.
Back to the previous menu.
OSD menu
Press “▼”or “▲” key to select a function, and press “menu” to adjust. After the
adjustment is done, press “menu” key to save and “source” key to return to the
previous page.
Function Description
Press “+”or “-” key to move the OSD display position to the right or the left of the
screen.
Pr es s “+”or “-” ke y to move the OSD display position up or down the screen.
Press “+”or “-” key to set the OSD off time and press “menu” key
to save it.
9
Sets the system to factory default value.
Back to the previous page.
VGA/DVI
Press“▲”or“▼”key to select the signal source option （D-SUB or DVI）
Language
Press “▲”or“▼”key to select a language of OSD menu, and press
“menu” key to confirm.
Exit
To quit from the OSD Menu.
Power Saving Mode
This monitor meets the criteria of NUTEK/TCO and VESA DPMS
mode for display power management. It has a effective built-in power
management system that reduces power consumption automatically
when the PC is not used.
Otros manuales para W193
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Monitor de Edge10
Edge10
Edge10 C172 Manual de usuario
Edge10
Edge10 W223 Manual de usuario
Edge10
Edge10 T223 Manual de usuario
Edge10
Edge10 C171 Manual de usuario
Edge10
Edge10 TS701 Manual de usuario
Edge10
Edge10 T193 Manual de usuario
Edge10
Edge10 H170 Manual de usuario
Edge10
Edge10 T171 Manual de usuario
Edge10
Edge10 TS701 Manual de usuario
Edge10
Edge10 H170 Manual de usuario
Edge10
Edge10 C171 Manual de usuario
Edge10
Edge10 C190 Manual de usuario
Edge10
Edge10 C172 Manual de usuario
Edge10
Edge10 W193 Manual de usuario
Edge10
Edge10 T193 Manual de usuario
Edge10
Edge10 W243h Manual de usuario
Edge10
Edge10 T243h Manual de usuario
Edge10
Edge10 H170 Manual de usuario
Edge10
Edge10 C190 Manual de usuario
