Edge10 C172 Manual de usuario
COLOUR TFT LCD MONITOR
USER’S MANUAL
Model: C172
The display comes with a three year on site warranty.
To activate your warranty please register your display at
http://www.edge10.com by clicking on the help & support link.
1
Menu:
Introduction
Product Description .........................................................................Page.2
Package Contents..............................................................................Page.2
Product Features............................................................................... Page.2
Cleaning.............................................................................................Page.2
Precautions.........................................................................................Page.2
2. Control Function
OSD Button .......................................................................................Page.4
OSD Control.......................................................................................Page.5
Operating Procedure...............................................................................Page.5
3. Inputs Diagram
Inputs...................................................................................................Page.10
4. Display Angle.................................................................................Page.10
Tilting..................................................................................................Page.10
5. Product Specification....................................................................Page.11
6. Display Modes................................................................................Page.12
7. Service Information.......................................................................Page.12
2
Introduction
Product Description
Congratulations on your purchasing this new generation of monitor. Your LCD monitor
incorporates high quality display into a small light weighted module. It has power-saving capabilities
and emits no X-ray radiation. You will certainly benefit from this monitor in lots of way to name
some of them, comfort safety and environmental protection.
This LCD monitor incorporates 17" colour active matrix thin-film-transistor (TFT) liquid crystal
display to provide superior display performance. A maximum resolution of SXGA 1280X1024 is
ideal for designs that enhance this LCD monitor’s performance are Plug & play compatibility, audio
system and OSD(On Screen Display) controls.
Package Contents
Included with your LCD monitor are following
●17"TFT LCD monitor
●15pin D-sub signal cable
●AC power cable
●User s manual
●Warranty Card
Product Features
●High contrast colour TFT LCD display support resolution up to SXGA 1280X1024
●Compatible with IBM VGA, VESA, and Macintosh standards.
●Embedded audio system provides sound performance.
●Video in and S-video use.
Cleaning
● Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth.
●This removes dust and other particles that can scratch the screen,
●Do not apply pressure to the screen surface when wiping it clean.
●Do not pour or spray any liquid directly onto the screen or case of the LCD monitor.
●Chemical cleaners have been reported to damage the screen or the LCD monitor.
Precautions
●Read all these instructions and save them for later use.
●Follow all warning and instructions on the product.
Product
●Do not block the vent holes in the case.
●Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots.
It may cause accidental fire, electric shock or failure.
3
●Disconnect the power plug from the AC outlet if you are not using it for an indefinite period of
time.
●Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage points or other risks.
●Do not touch the screen directly with your fingers. You may damage the screen, and the grease
from your skin is difficult to remove.
●Do not apply pressure to screen. The LCD is very delicate.
Power
●Use the type of power indicated on the rating label.
Plug
●Do not remove any of the prongs of the monitor s
,
three-pronged power plug.
●Disconnect the power plug from the AC outlet under following conditions:
●If you are not using it for an indefinite period time.
●When the power cord or plug is damaged or frayed.
●If the product does not operate normally when the operating instructions are followed.
●If the product has been dropped or the cabinet has been damaged.
●If the product exhibits a distinct change in performance, indicating need for service.
Power and extension cord
●Do not allow anything to rest on the power cord.
●Do not locate this product where persons will walk on the cord.
●Use the proper power cord with correct attachment plug type. If the power source is 120V AC,
use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply,
use the tandem (T blade) type attachment plug with ground conductor power cord that meets
the respective European country s safety regulations, such as VDE for Germany.
●Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the
wall outlet does not exceed 10 amperes.
●Ensure that the total ampere ratings on all units plugged into the extension
cord is not above the cord s rating.
● If the power supply cord, which came with your monitor, is to be connected to the PC instead of
the wall outlet, this equipment is to be used with UL/TUV approved computers with receptacle
rated 100~240VAC,50/60Hz,
1.0A(minimum).
Environment
●Place the monitor on a flat and level surface.
●Place the monitor in a well-ventilated place.
●Keep the monitor away from:
Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment
that generates strong magnetic field.
4
Control Function
Control Button Front View
①Power LED: Indicates different status (Green---Normal operation; Red---Power Management;
Dark---Power turn off;)
②Power switch: Turns power on/off
③“+” Button: Adjust setting bars i.e. Contrast, Brightness, etc. to increase setting values of the
OSD;
④“-” Button: Adjust setting bars i.e. Contrast, Brightness, etc. to Decrease setting values of the
OSD;
⑤“▲” Button: Press to bring up the selection on OSD and select sub menu items.
⑥“MENU” Button: Enter the OSD (on Screen Display); and still can select sub menu items.
⑦“SOURCE” Button: Selects input mode: PC->VIDEO->SVIDEO->PC; Exit the OSD (On screen
Display), or exit the selected item.
5
OSDControl
Operating Procedure
1) Press “MENU” to enter OSD menu.
2) Press “SOURCE” to Exit OSD menu on screen Display, or Exit adjustment item.
3) Press “+”and “-” to selects main menu item.(left/right)
4) Press “MENU” to confirm, and enter to the sub menu.
5) Press “MENU” and “▲” to selects the sub menu items. (Up/down)
6) Press “+” and “-” to adjust the setting values, then press up or down to select next item.
PC MODE
Function Description
Contrast press “+”and“-”to adjust the setting value(0~100) to adjust contrast
Brightness press “+”and“-”to adjust the setting value(0~100) to adjust
brightness
H-Position Press “+” and“-” to move OSD MENU position to right or left
V-Position Press “+” and“-” to move OSD MENU position to up or down
Clock Press “+” and“-” to adjust the distortion character
6
Phase Press“+” and“-” to adjust the real image value of ADC
Colour Press “+”and“-”to adjust the colour mode.
( NORMAL, WARM,COOL,USER)
Auto Adjust press “+”and“-”to Auto tuning
TIMER FUNCTION
Function Description
Timer Press “+”and“-”to adjust sub items: (Current, Turn off, Turn on,
Turn on program, Switch and Switch program)
PIC Misc Not available for this model
Blue screen Not available for this model
CLOCK FUNCTION
7
Function Description
Current Press “+”and“-” to choice the Current mode (hour and minute),and press
“MENU” or“▲” button to adjust the setting values
Turn off Press “+”and“-” to choice the Turn off mode(hour and minute),and press
“MENU” or“▲” button to adjust the setting values
Turn on Press “+”and“-” to choice the Turn on mode(hour and minute),and press
“MENU” or“▲” button to adjust the setting values
Turn on
program
Press “+”and“-” to adjust the default program
Switch Press “+”and“-” to choice the Switch (hour and minute). And press
“MENU” or“▲” button to adjust the setting values
Switch
program
Press “+”and“-” to choice the different programs
8
OSD POSITION
Function Description
Language Press“+” and“-”to choice the language,(Chinese, English, Italian,
Spanish, Portuguese, German, France)
H-Position Press “+” and“-”to move the OSD MENU position to right or left
V-Position Press “+” and“-”to move the OSD MENU position to up or down
Duration Press “+” and“-” to set the OSD off time
Halftone Press “+” and“-” to adjust the transparency of the OSD menu
Information Display the best resolution status and version number
Recall Returns all controls back to factory setting
9
VIDEO FUNCTION
Function Description
Contrast Press “+”and“-”to adjust the setting value(0~100) to adjust the
contrast
Brightness Press “+”and“-”to adjust the setting value(0~100) to adjust the
brightness
HUE Not available for this mode
Saturation press “+”and“-”to adjust
Sharpness press “+”and“-”to adjust
Colour Tome Press “+”and“-”to adjust the colour ( NORMAL, WARM,COOL)
Picture Mode Press “+”and“-”to choose the Mode: (DEFAULT, BRIGHT, SOFT,
NATURE.
Otros manuales para C172
1
Tabla de contenidos
Otros manuales de Monitor de Edge10
Edge10
Edge10 C171 Manual de usuario
Edge10
Edge10 T171 Manual de usuario
Edge10
Edge10 TS701 Manual de usuario
Edge10
Edge10 W223 Manual de usuario
Edge10
Edge10 W193 Manual de usuario
Edge10
Edge10 TS701 Manual de usuario
Edge10
Edge10 W193 Manual de usuario
Edge10
Edge10 H170 Manual de usuario
Edge10
Edge10 C172 Manual de usuario
Edge10
Edge10 H170 Manual de usuario
Edge10
Edge10 T193 Manual de usuario
Edge10
Edge10 C171 Manual de usuario
Edge10
Edge10 T243h Manual de usuario
Edge10
Edge10 H170 Manual de usuario
Edge10
Edge10 T223 Manual de usuario
Edge10
Edge10 W243h Manual de usuario
Edge10
Edge10 C190 Manual de usuario
Edge10
Edge10 C190 Manual de usuario
Edge10
Edge10 T193 Manual de usuario
