1. Press to turn on flame effect and
enable heater.
Heater switches will not work unless
this switch is turned on.
2. Press again to shut off the power to
all functions.
1. Flame effect and power light on
switch turn on.
The heater is now enabled.
2. Power lights, heaters, and
flame effect turn off.
1. With power turned on, press to turn
on low heat (750W).
Low heat must be on to use high heat.
2. Press again to turn off low heat.
1. Heater and fan turn on low
(750W).
2. Low heat and fan turn off.
Flame stays on.
1. With power and low heat turned on,
press to turn on high heat (1500W).
Low heat must be on to use high heat.
2. Press again to turn off high heat.
1. Heater and fan turn on high
(1500W).
2. High heat and fan turn off. Low
heat and flame stay on.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach
an unsafe temperature , the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or
lint. If they are, use a vacuum to clean the vent areas.
5. With the POWER switch in the OFF position, plug the power cord back into the
6. If the problem continues, have your outlet and wiring inspected by a professional.
ALWAYS turn the heater OFF and unplug the power cord from the outlet
before cleaning, changing the light bulb, or moving this stove. Failure to do
so could result in electric shock, fire, or personal injury.
NEVER immerse in water or spray with water. Doing so could result in
electric shock, fire, or personal injury.
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT use brass polish or household cleaners as these will damage the metal.
Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
NEVER use abrasive cleansers or any cleaner that could scratch the surface.
