Edelbrock 7788 Manual de usuario

Catalog #7788

Rev. 12/07 - AJ/mc

Brochure #63-7788

LS1 VALLEY COVER PLATE

For Carbureted GM LS1 Engines ONLY

Catalog #7788

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with

common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified

mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific

Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer.

Improper installation may result in poor performance and engine or vehicle damage.

DESCRIPTION: This aluminum Valley Cover Plate is designed to cover the lifter valley of General Motors LS1/LS6 engines

when Edelbrock Performer RPM, Victor, or Super Victor carbureted intake manifolds are used. Since the Edelbrock Valley

Cover plate does not include provisions for the factory knock sensor, it is not recommended for use on EFI engines.

A raised boss has been provided if the LS6 PCV system will be used, but the hole will need to be drilled.

KIT CONTENTS:

❑1 Valley Cover Plate

INSTALLATION PROCEDURE

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628 • E-Mail: [email protected]

1. Be sure that the mating surfaces of the block and the surface of the cylinder heads that will meet the valley

cover are thoroughly clean and free of any oils or debris before installation. Use alcohol or lacquer thinner

on a lint-free rag to clean.

2. We recommend using GM Performance Parts gasket #12558178 between the block and cover plate, along

with an appropriate sealant, such as Edelbrock Gasgacinch (#9300).

4. Position the valley cover in place on the engine and install the stock bolts.

5. Tighten bolts to 10-12 ft./lbs., starting in the center and working your way to the ends.

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock 68732 Manual de usuario

Edelbrock

Edelbrock 4254 Manual de usuario

Edelbrock

Edelbrock 3867 Manual de usuario

Edelbrock

Edelbrock 1903 Manual de usuario

Edelbrock

Edelbrock 68932 Manual de usuario

Edelbrock

Edelbrock Russell 641540 Manual de usuario

Edelbrock

Edelbrock 4794 Manual de usuario

Edelbrock

Edelbrock 63-0181 Manual de usuario

Edelbrock

Edelbrock 5713 Manual de usuario

Edelbrock

Edelbrock 15008 Manual de usuario

Edelbrock

Edelbrock Harley Nitrous Systems 63-0052 Manual de usuario

Edelbrock

Edelbrock 15005 Manual de usuario

Edelbrock

Edelbrock 5778 Manual de usuario

Edelbrock

Edelbrock Victor Glidden 18 2858 Manual de operación y mantenimiento

Edelbrock

Edelbrock 77509 Manual de usuario

Edelbrock

Edelbrock 6500 Manual de usuario

Edelbrock

Edelbrock Performer 70011 Manual técnico

Edelbrock

Edelbrock Performer Series 8059 Manual de usuario

Edelbrock

Edelbrock 71836 Manual de usuario

Edelbrock

Edelbrock 5790 Manual de usuario

Edelbrock

Edelbrock E-Street 2 Manual de usuario

Edelbrock

Edelbrock Nitrous System 63-71940 Manual de usuario

Edelbrock

Edelbrock 5223 Manual de usuario

Edelbrock

Edelbrock 5671 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario