Edelbrock 2810 Manual de usuario

Rev. 2/04 - RS/mc

Catalog #2810/#2811

Brochure # 63-0257

Victor Intake Manifold for 400-455 c.i.d. Olds V8

Operating Range: 4000-7500 RPM

Catalog #2810 & #2811

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Edelbrock Victor Intake Manifold for 400-455 c.i.d.

Oldsmobile V8. If you have any questions or problems, do not hesitate to contact our Technical Hotline

at:

1-800-416-8628, from 7 am - 5 pm Pacific Standard Time, Monday-Friday, or via e-mail at: [email protected].

•Description: This manifold is designed for competition vehicles ONLY, and is not intended to be used on the street, as it

does not have provisions for chokes, emissions pieces, etc. It is designed for Olds 400-455 c.i.d. competition engines,

using stock cast iron, or Edelbrock Performer RPM aluminum cylinder heads. Port exit size is 2.22” x 1.28”, with enough

material to allow porting to match larger port openings, if desired. Two versions are available; Part #2810 uses standard

flange, 850 cfm carburetors, and Part #2811 is for 4500 series carburetors. Both models are suitable for drag racing

(Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum power up to 7500

rpm. The manifold carburetor pad height (A/B height) is 8.2”, and will not fit under most stock hoods.

•Port Matching: For maximum performance, we recommend port/gasket matching the port exits to the cylinder head.

The manifold is tapered in the last 1.5” of the runners to stock as-cast port exit size.

•Carburetor Recommendations: Use an appropriate racing carburetor or the accepted carburetor for your racing class.

•Intake Gasket: Use Mr. Gasket Part #404, or contact Mondello Performance at (805) 237-8808 for correct gasket kit.

•Carburetor Spacers: Some applications may benefit from the use of a one-inch open carburetor spacer, such as

Edelbrock Part #8710 (standard flange carburetors with Part #2810), or Part #8718 (cloverleaf spacer for 4500 series

carburetors with Part #2811). This normally requires slight recalibration of the carburetor since small losses of fuel signal

cause the engine to run somewhat leaner than without the spacer. A simple jet change is typically all that needs to be

done.

PLEASE complete and mail your warranty card. Be sure to write the model number in the “Part #____” space. THANK YOU.

Edelbrock Corporation • 2700 California St.

Torrance, CA 90503 • Tech Line: 1-800-416-8628

Office: (310) 781-2222 • E-Mail: [email protected]

Intake Manifold Tightening Sequence

Tighten All Manifold Bolts to 25 ft./lbs.

1 368

4572

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock 97383 Manual de usuario

Edelbrock

Edelbrock 7501 Manual de usuario

Edelbrock

Edelbrock 2186 Manual de usuario

Edelbrock

Edelbrock 3628 Manual de usuario

Edelbrock

Edelbrock 1997 Manual de usuario

Edelbrock

Edelbrock 68982 Manual de usuario

Edelbrock

Edelbrock 2010 Manual de usuario

Edelbrock

Edelbrock 5776 Manual de usuario

Edelbrock

Edelbrock 6876 Manual de usuario

Edelbrock

Edelbrock Russell 641540 Manual de usuario

Edelbrock

Edelbrock 68003 Manual de usuario

Edelbrock

Edelbrock Performer Series 8059 Manual de usuario

Edelbrock

Edelbrock 5683 Manual de usuario

Edelbrock

Edelbrock Performer 70070 Manual de usuario

Edelbrock

Edelbrock Super Victor Race Manifold 2928 Manual de usuario

Edelbrock

Edelbrock Russell 672500 Manual de usuario

Edelbrock

Edelbrock 72176 Manual de usuario

Edelbrock

Edelbrock 440 Manual de usuario

Edelbrock

Edelbrock 68882 Manual de usuario

Edelbrock

Edelbrock 66162 Manual de usuario

Edelbrock

Edelbrock 5747 Manual de usuario

Edelbrock

Edelbrock Russell 651107 Manual de usuario

Edelbrock

Edelbrock 5772 Manual de usuario

Edelbrock

Edelbrock 5684 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario