ECS MTC Manual de usuario

LOW POWER, LICENCE EXEMPT WIRELESS REMOTE CONTROLLOW POWER, LICENCE EXEMPT WIRELESS REMOTE CONTROL

The MTC Series is a range of low cost Telemetry Controllers providing both unidirectional and

bidirectional FM wireless links capable of simple control and monitoring tasks. Their ease of use and

numerous features make them ideal for adding wireless control and monitoring to any application

requiring wire free operation.

The MTC Series is a range of low cost Telemetry Controllers providing both unidirectional and

bidirectional FM wireless links capable of simple control and monitoring tasks. Their ease of use and

numerous features make them ideal for adding wireless control and monitoring to any application

requiring wire free operation.

MTC-2DI : Transmitter

Dual Digital Input Module

Features:

•User configurable operating modes

•Pluggable screw terminal connectors

•Opto-isolated inputs. 5KV isolation

•Two digital inputs, third trigger input

•SMA Antenna connector

•Visual indication of input state & operation

•Rugged extruded enclosure. 85mm x 55mm x 25mm

•151MHz/173MHz/433MHz/868MHz/914MHz/918MHz

Technical Specifications:

•Operating current: 7mA@8VDC, +10mA per active input.

•Wide operating voltage: 7 to 28VDC.

•User configurable operating modes

•Pluggable screw terminal connectors

User Settable Modes of Operation:

•Rising edge trigger

•Falling edge trigger

•Rising and falling edge trigger

•Rising on DI3 sends state of DI1 & DI2

MTC-2DO : Receiver

Dual Digital Output Module

Features:

•User configurable operating modes

•Pluggable screw terminal connectors

•Two relay outputs. NO & NC contacts

•SMA Antenna connector

•Visual indication of input state & operation

•Rugged extruded enclosure. 85mm x 55mm x 25mm

•Can learn upto 50 transmitters per receiver

•151MHz/173MHz/433MHz/868MHz/914MHz/918MHz

Technical Specifications:

•Operating current: 7mA @ 8VDC, +20mA per relay

•Wide operating voltage: 7 to 28VDC.

•User configurable operating modes

•Pluggable screw terminal connectors

•Relay contacts: 1A @ 24VDC. 0.5A @ 125VAC

•NO & NC contact provided for each output

User Settable Modes of Operation:

•Output 1 second momentary

•Output 10 second momentary

•Output state toggle

•Output latching

•Outputs latched on, DI3 resets outputs

•Output 1 momentary, output 2 latching

Embe ons Systems Pty Ltd yABN 55 095 055 575.

aunceston TAS, Australia 7250

3-6331-6843 yFax: +61-3-6331-1243

yhttp://www.embeddedcomms.com.au/

dded Communicati

P.O. Box 1957 L

Telephone: +61-

sales@embeddedcomms.com.au

MTC – Wireless Telemetry Controllers

MTC-FOB : Transmitter

Single Button KeyFOB Module

Features:

•Single button transmitter

•Internal loop antenna

•Visual indication of transmit

•User replaceable 12V battery

•ABS plastic enclosure. 60mm x 35mm x 15mm

•High security rolling code using AES encryption

•151MHz/173MHz/433MHz/868MHz/914MHz/918MHz

Technical Specifications:

•Operating current: 0mA @ idle. 9mA transmitting.

•Internal 12V battery.

Output Modes on MTC-2DO:

•Output 1 second momentary

•Output 10 second momentary

•Output state toggle

Digital Outputs on MTC-2DO (Receiver – Relay Outputs)

Both digital output relays provide an isolated

low capacity switch. The relay contacts are not

suitable for switching high currents or mains AC

voltages.

Use an external relay to switch high capacity

loads.

Provided relay contacts are Normally Open

(NO), Normally Closed (NC) and Common

(COM).

Digital Inputs MTC-2DI (Transmitter – Opto Inputs)

Three fully isolated digital inputs providing 5KV isolation are provided. DI1 and DI2 are used for the

digital inputs, while DI3 is provided as a trigger input for specific modes of the opposing output

module. The trigger input is used to initiate a transmission of the state of DI1 and DI2. If DI3 is not

used as a trigger input then DI1 and DI2 can be configured for sending a status transmission on either

rising (closure) or falling edge (opening) or both (rising & falling edge).

Inputs are configured with a debounce time of 200ms. They have a maximum rating of 28VDC

differential between the (+) and (-) inputs.

Embedded Communications Systems Pty Ltd yABN 55 095 055 575.

P.O. Box 1957 Launceston TAS, Australia 7250

Telephone: +61-3-6331-6843 yFax: +61-3-6331-1243

sales@embeddedcomms.com.au yhttp://www.embeddedcomms.com.au/

MTC – Wireless Telemetry Controllers

Pairing Transmitter to Receivers:

All transmitters are factory programmed with a unique 40 bit serial number. This serial number is

encrypted with an AES compliant 128 bit algorithm and transmitted as a unique transmission code

every closure of an input or press of a button. A code is never transmitted more than once and a

receiver will never accept an already sent code thus providing maximum security.

The same transmitter can be paired with any number of receivers.

Creating New Pairings

1. Using a paperclip press the Learn button on the

receiver

. The status LED will light.

2. Press the Learn button on the

transmitter

once. The status LED on the

receiver

will turn off.

3. Press the Learn button on the

transmitter

again. The status LED on then

receiver

will flash.

4. Wait for the receiver status LED to stop flashing. The transmitter will now work with the receiver.

Note: Each receiver can learn upto 50 unique transmitters.

Erase Receiver Pairings

1. On the MTC-2DI (

receiver

), press and hold the LEARN button for 10 seconds.

2. The signal LED will turn off after 10 seconds indicating all registered transmitters has been erased.

Note: Individual transmitter pairings cannot be erased.

End Panel Layout and Connections

MTC-2DI : Transmitter MTC-2DO : Receiver

Linking Options:

MTC-2DI : Transmitter MTC-2DO : Receiver

L1 L2 L3 Description L1 L2 L3 Description

Open Open Open Rising edge on DI1 or DI2 Open Open Open Momentary 1 second^

Link Open Open Falling edge on DI1 or DI2 Link Open Open Momentary 10 second^

Open Link Open Rising or falling edge Open Link Open Latching Toggle^

Link Link Open Rising on DI3 trigger Link Link Open Latching

Open Open Link Invalid (=open/open/open) Open Open Link Latched on. DI3 to clear

Link Open Link Invalid (=open/open/open) Link Open Link DO1 mom. DO2 latched

Open Link Link Invalid (=open/open/open) Open Link Link Invalid (open/open/open)

Link Link Link Invalid (=open/open/open) Link Link Link Invalid (open/open/open)

The KeyFOB transmitter only provides the first three function settings on the MTC-2DO receiver module.

Note: Invalid link options shown above are defaulted to the functionality of no links fitted.

§It’s strongly recommend to bench test a wireless link prior to installation to ensure your

chosen links settings give the desired output results for all combinations of input

states/transitions.

Embedded Communications Systems Pty Ltd yABN 55 095 055 575.

P.O. Box 1957 Launceston TAS, Australia 7250

Telephone: +61-3-6331-6843 yFax: +61-3-6331-1243

sales@embeddedcomms.com.au yhttp://www.embeddedcomms.com.au/

MTC – Wireless Telemetry Controllers

Available Frequencies & Operating Range

Freq

(MHz) TX

Power Country of

use

Range* (upto):

FOB to MTC-2DO

(antenna type)

Range (upto):

MTC-2DI to MTC-2DO

(small antenna)

Range (upto):

MTC-2DI to MTC-2DO

(external antenna)

151.275#100mW AUS n/a 1km (Helical) 5km+ (1/2 wave)

151.300 10mW AUS 150m (Helical) 300m (Helical) 2km+ (1/2 wave)

151.300 100mW AUS n/a 1km (Helical) 5km+ (1/2 wave)

151.600#100mW AUS n/a 1km (Helical) 5km+ (1/2 wave)

173.250 10mW Europe 150m (Helical) 300m (Helical) 2km+ (1/2 wave)

173.250 100mW NZ n/a 1km (Helical) 5km+ (1/2 wave)

433.920 10mW Many 100m (whip) 200m (whip) 500m+ (GI dipole)

433.920NB 10mW Many n/a n/a 1km+ (GI dipole)

433.920 25mW AUS 100m (whip) 500m (whip) 1km+ (GI dipole)

869.85 3mW Europe 30m (whip) 80m (whip) 200m (GI whip)

918.525#3mW AUS 30m (whip) 80m (whip) 200m (GI whip)

#By special order only. MOQ’s may apply. * FOB is an internal loop antenna

Ordering Information

The MTC Controller Series is available in a number of operating frequencies to suit specific requirements and

countries. Other frequencies are available if required but may be dependant on local regulations for the

country of use.

The MTC Controllers are available in a complete kit, or as stand alone modules for expanding a system. Stand

alone modules do not include any accessories or antenna. A number of antenna options are available; please

contact your supplier for further information.

MTC-2D-LINK Kit Contents

•1 x MTC-2DI and 1 x MTC-2DO

•1 x Printed MTC Quick Start Guide

•2 x Power Adapter. 9VDC 300mA.

•4 x Rubber feet and 1 strip adhesive backed velcro

•2 x Helical Antenna with SMA mount.

Options for the MTC-2DO & MTC-2DI

Antennas

•VHF – Wire wound helical mounted on an SMA

•VHF – ½ wave dipole, end-fed ground independent with 2m low loss coax + SMA

•VHF – ½ wave dipole, end-fed ground independent with 4m low loss coax + SMA

•UHF – Helical wire wound stubby mounted on an SMA

•UHF – ¼ wave whip mounted on an SMA

•UHF – Dipole, end-fed ground independent with 2m low loss coax

•UHF – 6 Element Yagi - 6dBi.

*Note, mounting hardware is not provided with the external antennas.

Cables, Adapters and Accessories

•Power Adapter Plug Pack. 300mA 9VDC

•TS32 DIN Rail Mounting Bracket

Specifications are subject to change without notification.

Embedded Communications Systems Pty Ltd yABN 55 095 055 575.

P.O. Box 1957 Launceston TAS, Australia 7250

Telephone: +61-3-6331-6843 yFax: +61-3-6331-1243

sales@embeddedcomms.com.au yhttp://www.embeddedcomms.com.au/

Este manual sirve para los siguientes modelos

Otros manuales de Controladores de ECS

ECS

ECS ECS-PROGRAMMABLE-FP Manual de usuario

ECS

ECS SiS180 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario