EcoxGear EcoExtreme 2 Manual de usuario

Models: GDI-EX3W210...220

User Guide

EcoExtreme 2

Quick Start

Control Buttons

Speakerphone Mic

LED Status Indicators

Charge & Bluetooth

Battery Level

Indicators

Push buttons on Clasps to open your

EcoExtreme 2 and access the Inside Panel

Turn on the Main Power Switch

On the Front Panel, press the Standby

Power Button to power on your

EcoExtreme 2

Search your Bluetooth Connection on

your Smart Device

Pair & Play

Control Buttons & Operations

Standby Power

Press the Standby Power

Button once to power

on or off.

IMPORTANT: Standby

Power function will NOT

operate when the Master

Power is set to OFF. Master

Power Switch on the

Inside Panel must be set

to ON for Standby & your

EcoExtreme 2 to operate.

Bluetooth

When turned ON, the

EcoExtreme 2 will power on

and search for your Bluetooth

device. Refer to Set Up

Recommendations 1-2-3

part for details.

EcoTalk

Press button once to activate

the voice assistant on your

device (Siri, OK Google,

etc.). Once activated, the

Speakerphone Mic on your

EcoExtreme 2 will hear your

voice commands and transfer

them to the voice assistant

on your device.

Note: Not all devices

have voice assistant

functionality; refer to

your device for details.

Zello

Use the Zello app to turn

your EcoExtreme 2 into a

Walkie-Talkie. Refer to Zello:

Push-to-Talk, Walkie-Talkie

Smartphone App for details.

Speaker Volume

Press to decrease or

to increase speaker volume.

NOTE: Some Bluetooth

devices may require to be

manually set for maximum

audio level.

Your EcoExtreme 2 will beep

to indicate when minimum

or maximum volume setting

is reached.

Track Selection

Press button once to select

previous song track or next

song track .

Play/Pause/Answer

Press button once to pause

or play song tracks.

When receiving an incoming

phone call, press button once

to answer. Press button again

to hang up. You can also

PRESS AND HOLD to reject

an incoming call.

LED Status Indicators

Connect USB-C Input on

the Inside Panel to a power

source. LED above the Power

Button on the Front Panel

indicates USB connection

Charging Status.

RED: Charge in process

GREEN: Full charge complete

When you turn on the

EcoExtreme 2, the blue LED

above the Bluetooth Button

on the Front Panel indicates

Bluetooth Status.

FLASHING: Ready to pair

SOLID: Bluetooth

connection successful

Refer to Set Up

Recommendations 1-2-3 for

additional details.

Battery Level Indicators

There also are four LED

Battery Level Indicators

located on the front of the

unit. Each LED represents

25% of a charge. Four full

LEDs indicate a full charge.

Refer to Set Up

Recommendations 1-2-3 for

additional details.

Speakerphone Mic

The integrated Speakerphone

Mic on the Front Panel allows

you to answer mobile calls

and use the EcoTalk feature.

Open Case

To open, press in the Safety Lock Button and pull up gently

on both clasps.

Important: Maintaining Waterproofness

If the case is not properly closed, the unit is NOT watertight.

To ensure the unit is watertight & waterproof, ALWAYS CLOSE

THE CASE PROPERLY before use.

To close both safety latches properly, close the case, and

gently push the clasps into their closed position until they

snap and lock into place.

Waterproof Test

Before you trust a waterproof case with your valuables, we

recommend conducting a simple waterproof test.

First, place a piece of paper inside your unit. Make sure

to close it securely. Then submerge it under water for

30 minutes.

If the paper is dry, then your unit is fully waterproof.

Waterproof Case

Push Button on

Both Clasps

Lift Gently on Both

Clasps & Open Case

Master Power Switch

EcoExtreme 2 has a separate

Master Power Switch and

a Standby Button. The

switch MUST be set to the

ON position to power your

EcoExtreme 2. Once the

switch is set to ON, use the

Standby Button located on

the Front Panel to turn the

unit on or off.

NOTE: When not in use for

extended periods, turn the

Master Power off to preserve

battery life.

IMPORTANT: Standby Power

function will NOT operate

when the Master Power is set

to OFF.

Inside Panel: Functions

USB-C Input

Connect the USB cable to the

5V USB-C Input to charge

your EcoExtreme 2.

RECOMMENDATION: Use

the USB cable and power

adapter included in the box.

NOTE: Charge time

from low to full charge is

approximately 3 hours.

While playing audio,

EcoExtreme 2 can

be charged.

CAUTION: Do NOT charge if

unit and/or connections are

wet or damp.

USB-C Input

Master Power

Switch

Charge Your EcoExtreme 2 Prior to First Use

For best performance, fully charge your EcoExtreme 2

before you turn it on for the first time. Connect the

USB-C port to the USB cable and a 5V power source.

Charge the unit until the LED Charging Status Indicator

and all four Battery Level Indicators are green, indicating

a full charge.

NOTE: The LED Charging Status Indicator will only turn

on while the EcoExtreme 2 is connected to a 5V power

source. It will shine red while charging and switch to

green when the unit has reached a full charge.

Approximately 3 hours of charging is required from a low

to a full charge.

Power source options include the USB connection to

your computer or a power outlet using a 5V USB to AC

power adapter. It is recommended to always use the

USB cable included with your EcoExtreme 2.

Power On, Battery, & LED Status Indicators

Once fully charged, press the Standby Power Button

on the front of your EcoExtreme 2. You will hear,

“Speaker on, ready to connect” when powering on.

IMPORTANT: Make sure that the Main Power Switch,

located on the Inside Panel, is set to the ON position. If

the switch is in the OFF position, your EcoExtreme 2 will

not be able to turn on using the Standby Power Button.

The LED battery level indicators are located on the front

of the unit. Each LED represents 25% of a charge, with 4

full LEDs indicating a full charge.

Audio playback time is approximately 15 hours at

75% volume.

Set Up Recommendations 1-2-3

Bluetooth Pairing & Your Audio

Connecting With Bluetooth:

Connect To Your Smart Device & Play Audio

When your EcoExtreme 2 is turned on, the LED

Bluetooth Status Indicator on the Front Panel will flash

blue, indicating the unit is ready to pair.

Turn on Bluetooth on your Bluetooth device (Smart

Device) and set the device in pairing mode. Available

Bluetooth connections shall appear. Select the

ECOXGEAR-PTT speaker from the list of discovered

devices on your Bluetooth device. Wait for a few seconds

until the connection is completed.

NOTE: Bluetooth connection feature is found in the

Settings section of most mobile phones and other

Bluetooth enabled devices.

When the ECOXGEAR-PTT selection is made and the

Bluetooth connection is completed, your EcoExtreme 2

will announce: “Your phone is connected.” The Bluetooth

Status Indicator will shine blue.

Once connected, select and play your desired audio.

Pairing Mode: If the Bluetooth Status Indicator is not

flashing or if you wish to place your EcoExtreme 2 in

pairing mode, press and release the Bluetooth Button

on the Front Panel. Your EcoExtreme 2 shall announce,

“Ready to connect,” when ready to pair to a new device.

NOTE: Your EcoExtreme 2 shall sync & wirelessly

pair with most Bluetooth enabled devices. The unit

remembers the last device paired and will automatically

search for previous connections when the speaker is

turned on or when a device comes back into Bluetooth

range. If a connection is lost due to range, the speaker

will look to re-establish that connection. If Bluetooth is

turned off on your Smart Device, the EcoExtreme 2 may

not automatically look for the device.

RECOMMENDATION: If you are not familiar with Bluetooth

pairing for your Smartphone or other Smart Device, refer to

the User Guide for your Smartphone to learn how to add

and pair a new device (EcoExtreme 2 for instance) to your

Smartphone using Bluetooth.

Bluetooth Pairing & Connections: Once paired, should you

have an issue switching between Bluetooth connections

between devices, open the Bluetooth Section within the

device currently connected to the EcoExtreme 2 and delete

the Bluetooth connection. The EcoExtreme 2 will then be

available to pair & connect to an alternate Bluetooth enabled

Smartphone / Audio Device.

Zello: Push-to-Talk, Walkie-Talkie

Smartphone App

Add the Zello Walkie-Talkie app onto your smartphone to turn

it into a push-to-talk, walkie-talkie that works anywhere in the

world with Internet access! You can use it one-on-one with a

friend or for a live group-call.

Steps to get “Zello” up and running with your EcoExtreme 2:

Download the Zello app onto your phone from Apple’s or

Google’s app stores.

Create your account and profile in Zello.

Add your friends/contacts you want to talk with

using Zello.

Connect your phone to your EcoExtreme 2

with Bluetooth.

Add your EcoExtreme 2 as a “Push-to-talk” button

within the Zello app, under the Options > Push-to-talk

button Menu. Ensure that your EcoExtreme 2 is

“Connected” as a “Push-to-talk” button.

Keep the Zello app open in the foreground or

background of your smartphone.

PRESS AND HOLD to send a walkie-talkie message

to your friends. Make sure to hold the button while

talking, and release when you’re done.

NOTES:

• Refer to the instructions within the Zello app for

updated revisions to its operation.

• The Push-to-talk button related feature settings are

under the Options > Audio Menu or Options > Alert

tones / vibrate Menu.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Oradores de EcoxGear

EcoxGear

EcoxGear GDI-EXBM901 Manual de usuario

EcoxGear

EcoxGear EcoDrift GDI-EXDRFT200 Manual de usuario

EcoxGear

EcoxGear SOUNDEXTREME SEI-ET7700 20 Series Manual de usuario

EcoxGear

EcoxGear EcoBoulder MAX GDI-EXBDR Series Manual de usuario

EcoxGear

EcoxGear GDI-VXYMHFTWL01 Manual de usuario

EcoxGear

EcoxGear EcoBoulder Manual de usuario

EcoxGear

EcoxGear ECOXBT GDI-EGBT500 Manual de usuario

EcoxGear

EcoxGear EcoRoam 20+ Manual de usuario

EcoxGear

EcoxGear EcoDuo GDI-EXPB2100 Manual de usuario

EcoxGear

EcoxGear GDI-EGST700--710 Guía de configuración

EcoxGear

EcoxGear ECOSTONE GDI-EGST700 Guía de configuración

EcoxGear

EcoxGear SEI-ETAMP7700 20 Series Manual de usuario

EcoxGear

EcoxGear SolJam Manual de usuario

EcoxGear

EcoxGear Ecotrek GDI-EXTRK210 Manual de usuario

EcoxGear

EcoxGear ECOXBT GDI-EGBT500-510 Manual de usuario

EcoxGear

EcoxGear EcoEdge Pro GDI-EXEDGPRO401 Manual de usuario

EcoxGear

EcoxGear SOUNDEXTREME LEDCast SEI-SESPKR65 Manual de usuario

EcoxGear

EcoxGear SOUNDEXTREME SEI-ETAMPBAT7700 20 Series Manual de usuario

EcoxGear

EcoxGear EcoPebble Manual de usuario

EcoxGear

EcoxGear SOUNDEXTREME ExtremeTower TBB8 Instrucciones de instalación

EcoxGear

EcoxGear GDI-EXEJ300 Manual de usuario

EcoxGear

EcoxGear GDI-EXBLD800 Manual de usuario

EcoxGear

EcoxGear EcoPebble Powerbank GDI-EXPPB100 Manual de usuario

EcoxGear

EcoxGear EcoRoam 30 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario