Echotouch 160 Guía de inicio rápido
1
THIS IS A TEMPORARY COVER
THE FINAL COVER IS IN A SEPARATE FILE
OWNER’S & INSTALLATION GUIDE
TOUCH SCREEN
COLOR 2-WAY
UPGRADE KIT
2
Table Of Contents
Installing & Programming The ECHO System....................................................... 3
Overview Of The Controller................................................................................... 4
The ECHO-TOUCH Status Screen ....................................................................... 5
Using The ECHO-TOUCH Controller .................................................................... 6
First time use & controller setup........................................................................ 6
Language selection ........................................................................................... 6
Controlling your system..................................................................................... 7
Mutli-Car Operation & Vehicle Proles ................................................................ 12
Multi-car operation........................................................................................... 12
Programming the vehicle name....................................................................... 12
Selecting car1 or car2 ..................................................................................... 13
Selecting the vehicle image............................................................................. 13
Programming The Controller Options.................................................................. 14
Selecting button beep, melody, & vibrate modes ............................................ 14
Clock & time options overview ........................................................................ 15
Setting the time & date .................................................................................... 15
Setting the time format (12 or 24 Hour)........................................................... 16
Setting the alarm clock .................................................................................... 16
Demo mode..................................................................................................... 17
LCD screen display options overview ............................................................. 17
Setting the screen on time............................................................................... 18
Setting the screen brightness.......................................................................... 18
Other Controller Functions .................................................................................. 18
Viewing the alarm trigger history ..................................................................... 18
Power off mode ............................................................................................... 19
Parking timer & remote start timer................................................................... 19
3
The ECHO-TOUCH communicates with a window-mounted base unit which
is plugged directly into the host security system module. The window-mount
antenna should be mounted directly to the interior glass by utilizing the attached
adhesive pad (clean the glass before adhering) for the best performance. The
receiver/transmitter also contains alternative Status Lights and a Valet Switch.
these may be used, or the original items may be retained.
NOTE: It is recommended to fully charge the controller before use.
Step 1
Locate &
Remove the
security system’s
Echo port jumper
connector (it has a
Red wire loop).
Step 3 Program the Echo controller and the
original 1-way transmitters into the security system
(see the system’s guide for instructions).
Echo Base
Transmitter/
Receiver Unit
Step 2 Plug in and route the Echo
transmitter/receiver unit wiring harness.
Using the adhesive tape, mount the Echo
transmitter/receiver onto an interior glass
(carefully clean the surface).
Host Omega Security
System Control
Module
( ( (ECHO
LED and
Valet Switch
plugs.
V
(congurations vary)
Installing & Programming The ECHO System
4
Overview Of The Controller
1
3
5
4
2
1) Antenna: Sends commands to the
system and receives conrmations for
2-way functions.
2) Touch Screen LCD: Displays all
controller function buttons as well as the
status of your system.
3) Home Button: This wakes up the
controller when the screen is off and
returns you back to the status screen.
4) Charger Port: This is where you plug
in the charger to recharge the control-
ler’s battery.
5) Keychain Loop: Use this loop to
attach the controller to your keychain.
5
The ECHO-TOUCH Status Screen
Battery Level Indicator*
Clock/Timer
Current System State
Vehicle Image
(Selectable)
Alarm Clock ON icon
Vehicle Name
(Programmable)
CH2/CH3 Indicator
Remote Start ON/OFF Indicator
Melody/Voice Indicator
Vibration Mode Indicator
Lock/Unlock Indicator
Alarm Trigger Indicator
In Range Indicator
*The controller is powered by a built-in rechargeable battery. When the battery
level indicator shows a low battery, plug the supplied USB cable into the control-
ler, then connect the othe end to the supplied AC adapter or your computer’s USB
port. While charging, the indicator will increment from empty to full. When full, the
indicator will show a plug icon.
6
Using The ECHO-TOUCH Controller
FIRST TIME USE & CONTROLLER SETUP
Before the controller will function properly, it must be matched to the type of
system you have. The ECHO-TOUCH is compatible with many different sys-
tems so please follow these steps to congure it for yours:
1) Press the HOME button to turn on the controller.
2) Tap the screen to see the control icons
3) Press the UP ARROW once until you see SCREEN
6 (pictured to the right).
4) Press the SYSTEM TYPE button
5) Select one of the following options:
Alarm System Only: Use this setting for systems with-
out a built-in remote start option.
GEN 1 Remote Start: Use this setting if you press
LOCK+UNLOCK to activate your remote starter.
GEN 2 Remote Start: Use this setting if you press the
“|||” button or a single dedicated “START” button to
activate your remote starter.
6) Press the “FOLDER” button to save the setting.
SCREEN 6
System Type Select
LANGUAGE SELECTION
Go to SCREEN 6 and choose: American ag = ENGLISH
Spanish ag = SPANISH
7
Using The ECHO-TOUCH Controller (cont’d)
CONTROLLING YOUR SYSTEM
SCREEN 1: To access, press the HOME button and tap the screen.
LOCK: Press and release the “LOCK” icon.
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
UPON RECEIVING CONFIRMATION FROM YOUR•
SYSTEM, IT WILL PLAY THE LOCK/ARM ANIMATION
AND VOICE ALERT.
NOTE: PRESSING LOCK TWICE IN 5 SECONDS
STARTS THE PARKING TIMER. THE CLOCK WILL
CHANGE TO 0:00 AND START COUNTING IN MIN-
UTES & HOURS.
UNLOCK: Press and release the “UNLOCK” icon.
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
UPON RECEIVING CONFIRMATION FROM YOUR•
SYSTEM, IT WILL PLAY THE UNLOCK/DISARM ANIMA-
TION AND VOICE ALERT.
8
TRUNK RELEASE / CHANNEL 2: Press the and hold the “TRUNK” icon for 3
seconds.
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
UPON RECEIVING CONFIRMATION FROM YOUR•
SYSTEM, IT WILL PLAY THE TRUNK RELEASE ANIMA-
TION AND VOICE ALERT
START (GEN 1/GEN 2 REMOTE START): Press and release the “ ” icon us-
ing the same method as with the original controller (i.e., 1 or 2 presses, etc).
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
UPON RECEIVING CONFIRMATION FROM YOUR•
SYSTEM, IT WILL PLAY THE REMOTE START ANIMA-
TION, AND PLAY THE REMOTE START ON/OFF VOICE
ALERT.
THE CLOCK WILL CHANGE TO 0:00 TO START THE•
REMOTE START TIMER. IT WILL TIME HOW LONG
THE ENGINE RUNS IN MINUTES & HOURS.
*
Using The ECHO-TOUCH Controller (cont’d)
9
Using The ECHO-TOUCH Controller (cont’d)
CHANNEL 3 (ALARM ONLY): Press and release the “ ” icon using the same
method as with the original controller (i.e., 1 or 2 presses, etc).
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
UPON RECEIVING CONFIRMATION FROM YOUR•
SYSTEM, IT WILL PLAY THE CHANNEL 3 ANIMATION
AND VOICE ALERT.
*
CHANNEL 3 (GEN 1/GEN 2 REM START): Press and release the “CH3” icon
using the same method as with the original controller (i.e., 1 or 2 presses, etc).
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
UPON RECEIVING CONFIRMATION FROM YOUR•
SYSTEM, IT WILL PLAY THE CHANNEL 3 ANIMATION
AND VOICE ALERT.
SCREEN 2: To access, press the HOME button, tap the screen, press the down
arrow once.
10
Using The ECHO-TOUCH Controller (cont’d)
CHANNEL 4 (IF EQUIPPED): Press and release the “CH4” icon using the
same method as with your original controller (i.e., 1 or 2 presses, etc).
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
NOTE: THE “CH3” ICON WILL NOT BE VISIBLE
WHEN THE CONTROLLER IS SET FOR “ALARM
ONLY” UNDER THE “SYSTEM TYPE” SETTING.
YOUR SYSTEM SHOULD REACT THE SAME AS•
WITH YOUR ORIGINAL CONTROLLER.
NOTE: THE “CH3” ICON WILL NOT BE VISIBLE
WHEN THE CONTROLLER IS SET FOR “ALARM
ONLY” UNDER THE “SYSTEM TYPE” SETTING.
CHANNEL 5 (IF EQUIPPED): Press and release the “CH5” icon using the
same method as with your original controller (i.e., 1 or 2 presses, etc).
Tabla de contenidos
Manuales populares de Alarma de coche de otras marcas
Federal Signal Corporation
Federal Signal Corporation Pathfinder Siren Series Manual
Falcon
Falcon Predator XL3 Guía del usuario
Audiovox
Audiovox Auto Security XR91 Instrucciones de funcionamiento
Clifford
Clifford Sabre II Manual de usuario
CrimeStopper
CrimeStopper CS-8717 Guía de inicio rápido
Ultra Start
Ultra Start 450 SERIES Manual de usuario
