EchoStar Hughes 45 Series Manual de usuario
Hughes 45XX
Install Guide
H66664
Revision C
May 18, 2021
2 Copyright and Trademark Statements
H66664 Revision C
Copyright © 2021 Hughes Network Systems, LLC
All rights reserved. This publication and its contents are proprietary to Hughes Network Systems,
LLC. No part of this publication may be reproduced in any form or by any means without the
written permission of Hughes Network Systems, LLC, 11717 Exploration Lane, Germantown,
Maryland 20876.
Hughes Network Systems, LLC has made every effort to ensure the correctness and completeness
of the material in this document. Hughes Network Systems, LLC shall not be liable for errors
contained herein. The information in this document is subject to change without notice. Hughes
Network Systems, LLC makes no warranty of any kind with regard to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Trademarks
HUGHES, HughesNet, HughesON, IPoS, SPACEWAY, and JUPITER are trademarks of Hughes
Network Systems, LLC. All other trademarks are the property of their respective owners.
Contents
H66664 Revision C 3
Contents
Understanding safety alert messages ....................................................................................... 4
Messages concerning personal injury .................................................................................................... 4
Messages concerning property damage ................................................................................................ 4
Safety symbols ........................................................................................................................................ 4
Additional symbols ........................................................................................................................... 4
Warnings for Satellite Terminal .............................................................................................................. 5
Equipment users ..................................................................................................................................... 6
Chapter 1
Installation instructions ............................................................................................................ 8
1.1 Overview ....................................................................................................................................... 8
1.2 45XX quick start ............................................................................................................................ 8
1.3 Determining where to install the terminal ................................................................................. 10
1.4 Optional 45XX mounting hardware ............................................................................................ 10
1.4.1 Terminal mounting points ............................................................................................... 10
1.4.2 Magnetic mounting kit .................................................................................................... 11
1.4.3 Fixed mounting bracket kit ............................................................................................. 11
1.4.4 Pole mount kit ................................................................................................................. 12
1.4.5 Cables and connectors options ....................................................................................... 12
1.5 Terminal installation using the optional mounting kits .............................................................. 13
1.5.1 Terminal installation using the magnetic mounting kit .................................................. 13
1.5.2 Terminal installation using the fixed mounting bracket kit ............................................ 14
1.6 System power requirements ...................................................................................................... 16
1.7 Power and data cable ................................................................................................................. 17
1.7.1 Custom connection (power and data cable: RJ45 wiring block) ..................................... 17
1.8 Vehicular installation .................................................................................................................. 18
1.8.1 Terminal power connection ............................................................................................ 18
1.8.2 Vehicular power schematics ........................................................................................... 19
1.9 Maritime installation .................................................................................................................. 19
1.9.1 Terminal power connection ............................................................................................ 19
1.9.2 Marine coating description ............................................................................................. 19
1.10 Fixed installation ......................................................................................................................... 20
1.10.1 Terminal power connection ............................................................................................ 20
Chapter 2
Technical specifications .......................................................................................................... 21
2.1 Bracket ........................................................................................................................................ 21
2.2 Screws and washers .................................................................................................................... 21
4 Understanding safety alert messages
H66664 Revision C
Understanding safety alert messages
Safety alert messages call attention to potential safety hazards and tell you how to avoid them. These
messages are identified by the signal words DANGER, WARNING, CAUTION, or NOTICE, as illustrated
below. To avoid possible property damage, personal injury, or in some cases possible death, read and
comply with all safety alert messages.
Messages concerning personal injury
The signal words DANGER, WARNING, and CAUTION indicate hazards that could result in personal injury
or in some cases death, as explained below. Each of these signal words indicates the severity of the
potential hazard.
CAUTION indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
Messages concerning property damage
A NOTICE concerns property damage only.
NOTICE is used for advisory messages concerning possible property
damage, product damage or malfunction, data loss, or other unwanted
results—but not personal injury.
Safety symbols
The generic safety alert symbol calls attention to a potential personal injury hazard. It appears
next to the DANGER, WARNING, and CAUTION signal words as part of the signal word label. Other
symbols may appear next to DANGER, WARNING, or CAUTION to indicate a specific type of hazard (for
example, fire or electric shock). If other hazard symbols are used in this document they are identified in
this section.
Additional symbols
This document uses the following hazard symbols:
Warning: Where you see this alert symbol and WARNING
heading, strictly follow the warning instructions to avoid
personal injury.
Warning: Where you see this alert symbol and WARNING
heading, strictly follow the warning instructions to avoid
personal injury.
Understanding safety alert messages
H66664 Revision C 5
Danger: Electric shock hazard: Where you see this alert
symbol and DANGER heading, strictly follow the warning
instructions to avoid electric shock injury or death.
Warnings for Satellite Terminal
Do Not Stand near by the Antenna: This device emits radio
frequency energy. To avoid injury, do not place head or
other body parts in front of the satellite antenna when
system is operational. Maintain half meter distance from the
terminal while active.
General: Handle your Satellite Terminal with care. The unit is
weather resistant per IEC 60529 IP67; however, do not
submerge the unit. Avoid exposing your Satellite Terminal to
extreme hot or cold temperatures outside the range -25° C
to +65° C.
Avoid placing the Terminal close to cigarettes, open flames
or any source of heat.
Changes or modifications to the Terminal not expressly
approved by Hughes Network Systems could void your
authority to operate this equipment.
Only use a soft damp cloth to clean the Terminal.
To avoid impaired Terminal performance, please ensure the
unit’s antenna is not damaged or covered with foreign
material like paint or labeling
When inserting the SIM, do not bend it or damage the
contacts in any way. When connecting the interface cables,
do not use excessive force.
In the Vicinity of Blasting Work and in Explosive
Environments:
Never use the Satellite Terminal where blasting work is in
progress. Observe all restrictions and follow any regulations
or rules. Areas with a potentially explosive environment are
often, but not always, clearly marked. Do not use the
Terminal while at a petrol filling station. Do not use near fuel
or chemicals.
Qualified Service: Do not attempt to disassemble your
Satellite Terminal. The unit does not contain consumer-
serviceable components. Only qualified service personnel
may install or repair equipment.
Accessories: Use Hughes approved accessories only. Use of
non-approved accessories may result in loss of performance,
damage to the Satellite Terminal, fire, electric shock or
injury.
6 Understanding safety alert messages
H66664 Revision C
Connecting Devices: Never connect incompatible devices to
the Satellite Terminal. When connecting the Satellite
Terminal to any other device, read the device’s User Manual
for detailed safety instructions.
Pacemakers: The various brands and models of cardiac
pacemakers available exhibit a wide range of immunity levels
to radio signals. Therefore, people who wear a cardiac
pacemaker and who want to use a Satellite Terminal should
seek the advice of their cardiologist. If, as a pacemaker user,
you are still concerned about interaction with the Satellite
Terminal, we suggest you follow these guidelines:
Maintain a distance of half meter from the main
antenna front and sides and your pacemaker
Refer to your pacemaker product literature for
information on your particular device
If you have any reason to suspect that interference is taking
place, turn off your Satellite Terminal immediately.
Hearing Aids: Most new models of hearing aids are immune
to radio frequency interference from Satellite Terminals that
are more than 2 meters away. Many types of older hearing
aids may be susceptible to interference, making it very
difficult to use them near a Terminal. Should interference be
experienced, maintain additional separation between you
and the Satellite Terminal.
Electrical Storms: Operation of the Satellite Terminal during
electrical storms may result in severe personal injury or
death.
Equipment users
User must be a skilled person. Designated users should not be exposed to conditions that could cause
pain or injury, nor intentionally caused said conditions.
Understanding safety alert messages
H66664 Revision C 7
8 Chapter 1 • Installation instructions
H66664 Revision C
Chapter 1
Installation instructions
1.1 Overview
This Install Guide provides instructions on how to manually mount a Hughes 45XX Terminal using the
optional mounting hardware. Please refer to the following documents for more details:
1. Quick Start Guide: This guide focuses on the instructions to unpack and set up the Hughes 45XX
Terminal for the first time.
2. User Guide: This guide provides the most up-to-date information available on the Hughes 45XX
Terminal, including configuration details and troubleshooting suggestions.
1.2 45XX quick start
Here are the instructions on setting up a Hughes 45XX Terminal for the first time:
1. Unpack the box. Without tearing the plastic around the 45XX, lift it out of the box, unfold the
flaps, and slide it out of the sleeve. Save the box and packing material should you need to ship
the 45XX at a later date.
2. Remove the SIM door.
3. Insert the satellite SIM card supplied by your service provider in the SAT SIM slot as shown in
Figure 1. Push until you hear a click.
Figure 1: Hughes 4500 SIM slot
4. If you are using the 4510 terminal and a third-party cellular service cellular SIM:
a. Insert the cellular SIM card supplied by your service provider in the CELL SIM holder
provided. The position of the SIM within the holder is shown below:
Figure 2: Hughes 4510 CELL SIM holder
Hughes 4510
CELL SIM holder
CELL SIM positioning
CELL SIM holder hook
Chapter 1 • Installation instructions
H66664 Revision C 9
b. Carefully insert the CELL SIM holder into the CELL SIM slot as shown in Figure 3:
Figure 3: Hughes 4510 SIM slots
Note: If you need to remove the CELL SIM from the terminal, carefully pull out the hook to
remove the CELL SIM holder from the slot.
5. Connect a Hughes cable (3501314-000x) from the barrel connector to power and Ethernet using
the cable pinout table below:
Figure 4: Cable Pinout Table
6. Ensure that the red wire is connected to always-on 12VDC and that the white wire is connected
to switched power (e.g., vehicle ignition) to power the 45XX on and off automatically, as there is
no power button on the 45XX.
Note: The power supply must be rated for a maximum peak current of 3.5 A at 12V.
Figure 5: Terminal wiring configuration
Hughes 45XX
Connector
10 Chapter 1 • Installation instructions
H66664 Revision C
After powering up, the 45XX will attempt to establish a connection. The LED states are provided
in the table below.
State
LED
Powering up
Solid
GREEN
Network
acquisition
GREEN
flashing
Registered and IP context active
Solid
GREEN
Hardware Fault
Solid
RED
7. Connect the 45XX to your computer via Ethernet or the USB port under the SIM door. Open a
Web browser and enter the address 192.168.128.100 (Ethernet) or 169.254.1.1 (USB) to access
the home page of the UT Web User Interface.
8. Many configuration options are documented in the 45XX User Guide, which can be downloaded
from http://echostarmobile.com.
1.3 Determining where to install the terminal
For your Hughes 45XX Terminal to function correctly, it must be installed in a location that provides a
clear view of the sky in all directions for a vehicular install and an unobstructed view to the satellite in a
fixed install. The terminal does not need to be pointed, but it should be mounted on a roughly
horizontal surface.
1.4 Optional 45XX mounting hardware
Please refer to the Hughes catalog and pricelist for the purchase of any mounting hardware, or visit
our website:
https://www.hughes.com/products-and-technologies/satellite-ground-systems/mobile-satellite-
terminals/echostar-mobile-satellite-terminals
1.4.1
Terminal mounting points
The 45XX Terminal has four mounting points with M5 threads as shown in Figure 6. The optional
mounting hardware is attached to these mounting points:
Figure 6: Bottom view of 45XX showing mounting points
132m
159m
Tabla de contenidos
Otros manuales de Terminal táctil de EchoStar
