ECD M.O.L.E. EV20 Manual de usuario
QUICK REFERENCE GUIDE
1
CONTENTS
WELCOME.......................................................................................................................2
EQUIPMENT
FEATURES/FUNCTIONS..........................................................................................3
STATUS ACTIVITY LED............................................................................................ 4
HOME SCREEN ........................................................................................................5
MAIN MENU............................................................................................................6
SETUP
CHARGING THE POWER PACK..............................................................................7
SOFTWARE INSTALLATION ...................................................................................8
COMMUNICATIONS .............................................................................................10
OPERATION
INTRODUCTION....................................................................................................12
STEP 1: SETUP INSTRUMENT ..............................................................................13
STEP 2: DATA COLLECTION..................................................................................18
STEP 3: VIEW DATA ..............................................................................................21
STEP 4: DOWNLOAD DATA..................................................................................23
2
WELCOME
This Quick Reference Guide is designed to help the user to familiarize themselves with the
equipment, perform basic hardware setup/communications and operation. For detailed
information on both Hardware & Software components, please refer to the Help system
accessible in the M.O.L.E.™ MAP Software.
To access the help system start the software and use any of the methods listed:
• Select the Help Button on the Toolbar.
• Pressing the shortcut key [F1]
• On the Help menu, click MAP Help.
3
EQUIPMENT
FEATURES/FUNCTIONS
Display:
The touch screen interface
of the thermal proler.
Thermocouple/Inputs:
This is where up to 20
thermocouple sensors are
connected.
Data/Charging Port:
Transfers data to/from a
computer & charges the
internal battery.
LED:
Indicates various statuses
of the thermal proler.
ON/OFF Button:
Turns Proler “ON/OFF”.
Wireless Antenna Port:
This is where the Optional
antenna is connected.
Record Button:
Starts/Stops thermal
proler recording data.
LED Color Solid Flashing
Green Indicates thermal proler is
“ON” and idle
Indicates thermal proler is
recording data. (Log Interval:
1 sec., ash each log, < 0.5
sec., ash 4 times per sec., > 1
sec., ash every 2 seconds)
Red -
Flashes 5 times to indicate
when the internal battery
voltage is low or internal
temp is at or above a
threshold or all channels are
OFF or when the memory
is full
Yellow
Power ON. LED illuminated
for 3 seconds during system
check
-
Blue Wireless communication
connection established
Indicates when unit and
transceiver is transferring data
4
EQUIPMENT
STATUS ACTIVITY LED
➊
➋
➌ ➎➍
➏ ➐
5
EQUIPMENT
HOME SCREEN
➊Channel status indicators:
· Shows current sensor Temp.
· Grayed when disabled
· “N/C” if T/C not connected/open
· Touch opens Channel enable
type selection screen ➏Log interval:
· Displays the congured log interval
➎MOLE Temp:
· Red if >70C
· Yellow if >40C, <=70C
· Green if <=40C
➋Date/Time:
· Displays the current date/time
from the internal clock ➐Menu button:
· Touch to open main menu screen
➌Battery charge:
· Displays charge (0-100%)
· 20% resolution (5 steps)
➍File storage:
· Displays how full (0-100%)
· 10% resolution (10 steps)
6
EQUIPMENT
MAIN MENU
Record Congure Screen Select Prole Screen Select KPI Screen
Date/Time Screen Units Screen Bluetooth® Screen
Battery Screen M.O.L.E. History Screen Factory Screen
A completely discharged battery
takes about 4 hours to be fully
charged.
➋
➊
7
SETUP
CHARGING THE POWER PACK
1. Insert the USB computer interface
cable into a computer USB port
2. Insert the USB-C end into the data/
charging port.
➋
8
SETUP
SOFTWARE INSTALLATION
1. Insert the ash drive in a USB port
and the AutoPlay menu appears.
2. Select Open folder to view les
button on the AutoPlay menu to
launch Windows® Explorer. Closely
follow the instructions for your
operating system. For detailed
information view the Installation
Help le on the ash drive.
Locate the setup.exe on the
installation drive. Double-click
the le to proceed.
1. Select the Next command button
to follow the installation wizard
process.
9
SETUP
SOFTWARE INSTALLATION
Tabla de contenidos
Otros manuales de Instrumento de medición de ECD
ECD
ECD H10C Manual de usuario
ECD
ECD DO82 Manual de operación y mantenimiento
ECD
ECD MOLE EV6 Manual de usuario
ECD
ECD L20 Manual de usuario
ECD
ECD V-M.O.L.E. Manual de usuario
ECD
ECD HCA1 Manual de usuario
ECD
ECD TC80 Manual de usuario
ECD
ECD WaveRIDER Series Manual de instalación
ECD
ECD FCA-22 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario