Ebode IPV68P2P Manual de usuario
www.ebodeelectronics.eu
Quick Start Guide
IPV68P2P
Wi-Fi HD960P 1.3MP PTZ Dome P2P IP Camera
Quick Start Guide 4
Schnellstart-Anleitung 16
Quick Start Guide 28
Snabbstartsguide 40
Guide de démarrage rapide 52
Guía de inicio rápido 64
Guia de Início Rápido 76
Guida Rapida 88
Before using this product, please read this document carefully and visit
www.ebodeelectronics.eu for latest manual, software and FAQ.
12-11-2015 - 2 - ebode IPV68P2P
Contents of the kit:
1x IP Camera 1x Power Adapter 1x Resource CD
1x Ethernet Cable 1x Wi-Fi Antenna 1x Quick Start Guide
1x Surveillance Sticker 1x ebode Leaflet
Technical Specification:
Wi-Fi HD960P 1.3MP PTZ Dome P2P IP Camera
P2P Feature For Easy Remote Access
H.264 Video Compression
4x Zoom Lens Provide Detailed View
Motion Detection Alarm via E-Mail And FTP
Free ebode DDNS Service Embedded
Compatible With Free ebode Central Management Software
Compatible With Free ebode iOS And Android APP
Supports IEEE 802.11n Wireless Connection
Supports WEP, WPA And WPA2 Encryption
Supports Two-Way Audio
With 21pcs IR-LEDs, Night Vision Range Up To 20m
Day / Night Surveillance, IR LEDs On / Off Auto Switch
Auto Focus function
Optional: Build in SD Memory Card and Dropbox Feature
Users manual’
12-11-2015 - 3 - ebode IPV68P2P
Product Characteristics:
In Colli: 5 Pcs
Weight Colli: 10,4 KG
Volume Colli: 0.073
Length Colli: 80,0 cm
Width Colli: 30,0 cm
Height Colli: 30,5 cm
Length Product Carton: 15,5 cm
Width Product Carton: 29,5 cm
Height Product Carton: 28,5 cm
Weight Article: 3,080 kg
EAN Code EU: 8717399103336
EAN Code UK: 8717399103343
Optional articles for this product:
ebode offers some articles which are optional to order for the IPV68P2P Wi-Fi HD960P
1.3MP PTZ Dome P2P IP Camera:
POE-IPV5868
The ebode PoE injector cable kit provides additional ease of install for all your ebode IP
Cameras. All our ebode cameras need both Ethernet and power and in some (most outdoor)
installations it is needed to run wires and connect the camera to the power mains and
Ethernet. With the ebode PoE injector cable kit it is no longer needed to run separate power
to feed power to our cameras saving installation costs and materials. Please note that there
are two available kits, 1.) POE-IPV38 for IPV38(P2P), and 2.) POE-IPV5868 for IPV58P2P
and IPV68(P2P). It is possible to have the cameras bundled with the correct PoE injector
cable kit as item numbers: IPV38POE, IPV58POE and IPV68POE.
IPV68P2PSD
ebode offers the possibility to purchase the ebode IPV68P2P including the extra feature of
a build in SD memory card. With this memory card it is possible to save alarm recordings to
your Dropbox account directly and make them available from everywhere in the world you
have internet access.
Please contact ebode in case you would like to purchase one of these optional items.
12-11-2015 - 4 - ebode IPV68P2P
Quick Start Guide
1.Conformity of Use
For carefree and safe use of this product, please read this manual and safety information
carefully and follow the instructions. The unit is registered as a device that does not cause
or suffer from radio-frequency interference. It is CE approved and it conforms with the Low
Voltage Directory. The safety and installation instructions must be observed. Technical
manipulation of the product, or any changes to the product, are forbidden, due to security
and approval issues. Please take care to set up the device correctly - consult your user
guide. Young children should use the device only under adult supervision. No guarantee or
liability will be accepted for any damage caused due to incorrect use of the equipment
supplied, other than indicated in this owner’s manual.
Safety warnings
To prevent short circuits, this product (except if specified for outdoor usage) should only
be used inside and only in dry spaces. Do not expose the components to rain or humidity.
Only connect the power cord to the mains after checking whether the mains voltage is
the same as the values on the rating labels. Never connect a power cord when it is
damaged. In that case, contact your supplier. If there is any danger of a thunderstorm, it is
a good precaution to unplug the power supply from the mains network in order to protect
it from lightning. The same applies if the system is to be out of action for any length of time.
Avoid strong mechanical tear and wear, extreme ambient temperatures, strong
vibrations and atmospheric humidity.
Do not disassemble any part of the product: the device contains live parts and no
user-serviceable parts are inside. The product should only be repaired or serviced by
qualified and authorized service personnel. Defected pieces must be replaced by original
(spare) parts.
Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together. Remove the
batteries when you are not using the system for a longer period of time. When inserting
batteries be sure the polarity is respected. Make sure that the batteries are not short
circuited and are not disposed in fire (danger of explosion).
In case of improper usage or if you have opened, altered and repaired the product yourself,
all guarantees expire. The supplier does not accept responsibility in the case of improper
usage of the product or when the product is used for purposes other than specified. The
supplier does not accept responsibility for additional damage other than covered by the
legal product responsibility.
12-11-2015 - 5 - ebode IPV68P2P
1. Hardware Introduction
1.1 Physical Description
1.2 Hardware Connection
1. Mount the antenna and make it stand vertically.
2. Connect the camera to the LAN network (router/switch) via Ethernet cable.
3. Connect the power adapter to the camera.
2. Software Installation
1. Insert the CD into the CD drive of your computer and open it.
2. Go to the folder “Software”, then go to the folder “IP Camera Search Tool”.
3. Go to “For Windows OS” / “For Mac OS” and Copy and paste the IP camera tool file to
your computer or drag it onto your desktop.
12-11-2015 - 6 - ebode IPV68P2P
Shortcut icon Windows OS Shortcut icon Mac OS
Note: If your computer does not have a CD drive, you can download the IP camera tool from
the ebode electronics website (www.ebodeelectronics.eu) for free. The camera has a
build-in webserver with all the necessary software in it. The only piece of software needed
is the IP Camera Tool to find the camera on the network.
3. Access the Camera
1. Enable the DHCP feature of your router (enabled by default normally), then open the IP
Camera Tool program which you have dragged to your desktop in the previous step. It
should display the camera’s IP address in your LAN (Local Area Network). Please make sure
the camera is connected to the same LAN as your computer.
2. If everything is connected right you should see your camera in the IP Camera Tool as
shown in the above image. Please click the camera and your default browser will open up to
the camera’s login page. When logging in for the first time, you will need to download and
install the IPCWebComponents. Internet Explorer and Google Chrome example are shown
below. For MAC OS Safari, or Mozilla Firefox, please refer to the User Manual. Note: It does
not support 64-bit browser.
Internet Explorer
12-11-2015 - 7 - ebode IPV68P2P
When you access the camera by Internet Explorer the first time, an error message that no
plugins have been found will show up. It is necessary to install the plug-in first before you
visit our camera. Simply click the “Install” button and follow a few simple steps.
Google Chrome
Just like Internet Explorer, Google Chrome requires a plugin to access the camera. Left-click
in the blue plugin message and install the plugin.
12-11-2015 - 8 - ebode IPV68P2P
3. After installing the IPCWebComponents, refresh the browser and click Login.
Note: by default Google Chrome will block pop-ups. If you see this popup block, your
IPCWebComponents from the previous steps might not be installed correctly or it requires
an update. Make sure to refresh your web-browser first and then unblock the pop-up and
update the plugin by clicking and re-installing the blue popup message.
12-11-2015 - 9 - ebode IPV68P2P
Now we are ready to login for the first time.
4. When you log in for the first time, the software will prompt you to modify the username
and password automatically. Input the New username, password and Confirm the password,
click “Modify” to complete the modification. Then use the new username and password to
log in again. After logging in, you should see live video on the interface.
Default user is admin
with no password.
Main stream offers
the highest quality
video while Sub
stream offers less
quality, but also less
delay when viewing.
12-11-2015 - 10 - ebode IPV68P2P
5. After logging in for the first time, the “Setup Wizard” will pop-up automatically. Please
set the basic parameters, such as camera name, camera time, wireless settings and so on.
6. After logging in, you should see live video on the web interface. If not, please go to the
FAQ section on the ebode electronics website (www.ebodeelectronics.eu).
Notes:
If you forget your username or password, press and hold the reset button on the
bottom of the camera using a pin for 5 seconds. This resets the camera to factory default.
If you want to access the camera over wireless or Internet, continue with the setup by
following the Wireless and Remote Access steps below.
Input the New
username and
password and
confirm the
password.
Otros manuales para IPV68P2P
2
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de Ebode
