Eaton Powerware 9390 IAC-D Manual de usuario

Powerware 9390 Integrated Accessory Cabinet

IAC-D Configuration

Installation and Operation Manual

For use with 40–80 kVA and 100–160 kVA UPS Models

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that you should follow during installation and

maintenance of the UPS and batteries. Please read all instructions before operating the

equipment and save this manual for future reference.

Consignes de sécurité

CONSIGNES DE SÉCURITÉ IMPORTANTES

CONSERVER CES INSTRUCTIONS

CE MANUEL CONTIENT DES CONSIGNES DE SÉCURITÉ IMPORTANTES

Powerware is a registered trademark of Eaton Electrical Inc.

document may be reproduced in any way without the express written approval of Eaton Corporation.

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

Table of Contents

1Introduction 1-1............................................................

1.1 Configurations 1-1............................................................

1.2 Using This Manual 1-3.........................................................

1.3 Conventions Used in This Manual 1-4............................................

1.4 Safety Warnings 1-5...........................................................

1.5 For More Information 1-6......................................................

1.6 Getting Help 1-6..............................................................

Section I – Installation

2 IAC-D Installation Plan and Unpacking 2-1....................................

2.1 Creating an Installation Plan 2-1.................................................

2.2 Preparing the Site 2-1.........................................................

2.2.1 Environmental Considerations 2-2...........................................

2.2.2 Preparing for Wiring the IAC-D 2-2...........................................

2.3 Inspecting and Unpacking the IAC-D 2-2.........................................

3 Installing the IAC-D 3-1.....................................................

3.1 Preliminary Installation Information 3-1..........................................

3.2 Unloading the Powerware 9390 IAC-D from the Pallet 3-1...........................

3.3 IAC-D Cabinet Installation 3-5..................................................

3.3.1 Line-up–and–Match IAC-D Installation 3-5.....................................

3.3.2 Standalone IAC-D Installation 3-10............................................

3.3.3 Installing IAC-D Power Wiring 3-12............................................

3.4 Initial Startup 3-14.............................................................

3.5 Completing the Installation Checklist 3-14.........................................

Section II – Operation

4 Understanding IAC-D Operation 4-1..........................................

4.1 Distribution Panelboard Configuration 4-1........................................

4.2 Distribution Breaker Configuration 4-1...........................................

4.3 Distribution Panelboard and Distribution Breaker Configuration 4-1..................

Table of Contents

ii EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

5 IAC-D Features, Options, Controls, and Operation 5-1.........................

5.1 IAC-D Standard Features 5-1...................................................

5.1.1 Installation Features 5-1....................................................

5.1.2 Expansion 5-1.............................................................

5.2 Options 5-1..................................................................

5.2.1 Distribution Panel 5-1......................................................

5.2.2 Distribution Breakers 5-1...................................................

5.3 Symbols 5-2.................................................................

5.4 IAC-D Controls 5-2............................................................

5.5 IAC-D Operation 5-5..........................................................

6 Maintaining the IAC-D 6-1...................................................

6.1 Important Safety Instructions 6-1................................................

6.2 Performing Preventive Maintenance 6-1..........................................

6.2.1 DAILY Maintenance 6-1....................................................

6.2.2 PERIODIC Maintenance 6-2.................................................

6.2.3 ANNUAL Maintenance 6-2..................................................

6.3 Short Circuits 6-2.............................................................

6.4 Maintenance Training 6-2......................................................

7 Product Specifications 7-1...................................................

7.1 Model Number 7-1...........................................................

7.2 IAC-D Input 7-1..............................................................

7.3 IAC-D Output 7-1.............................................................

7.4 Environmental Specifications 7-1................................................

Appendix A – Installation Information A-1.........................................

Warranty W-1...................................................................

iii

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

List of Figures

Figure 1-1. Powerware 9390 IAC-D Cabinet 1-2..............................................

Figure 2-1. Powerware 9390 IAC-D as Shipped on Pallet 2-3....................................

Figure 3-1. Removing Front Shipping Bracket on the Powerware 9390 IAC-D 3-3..................

Figure 3-2. Removing Rear Shipping Bracket on the Powerware 9390 IAC-D 3-4...................

Figure 3-3. 80 kVA UPS with Line-up–and–Match IAC-D 3-5....................................

Figure 3-4. 160 kVA UPS with Line-up–and–Match IAC-D 3-6...................................

Figure 3-5. 80 kVA UPS to IAC-D Joining Brackets 3-8.........................................

Figure 3-6. 160 kVA UPS to IAC-D Joining Brackets 3-9........................................

Figure 3-7. 80 kVA UPS with Standalone IAC-D 3-10...........................................

Figure 3-8. 160 kVA UPS with Standalone IAC-D 3-11..........................................

Figure 4-1. Path of Current Through the IAC-D with Distribution Panelboards 4-2.................

Figure 4-2. Path of Current Through the IAC-D with Distribution Breakers 4-3....................

Figure 4-3. Path of Current Through the IAC-D with Distribution Panelboard and Breakers 4-4......

Figure 5-1. Powerware 9390 IAC-D Controls – with Distribution Panel Option 5-3.................

Figure 5-2. Powerware 9390 IAC-D Controls – with Distribution Breaker Option 5-4...............

iv EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

This page intentionally left blank.

1-1

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

Chapter 1 Introduction

The Powerware®9390 Integrated Accessory Cabinet-Distribution (IAC-D) is designed for use

with the Powerware 9390 three-phase Uninterruptible Power Systems. The IAC-D provides

power distribution options for servers, racks, and other equipment via distribution

panelboards, or distributes power to larger loads via distribution circuit breakers. The

distribution options are custom configurable, enabling adaptation and expansion without

costly electrical rework.

The IAC-D is housed in a single, free-standing cabinet, with safety shields behind the doors

for hazardous voltage protection. The cabinet matches the UPS cabinet in style and color,

and can be installed in line-up–and–match or standalone configurations. Figure 1-1 shows

the Powerware 9390 IAC-D.

1.1 Configurations

The following IAC-D configurations are possible:

쑺One or two 225A distribution panels (208V only)

쑺One to six 40-100A adjustable distribution breakers (208V or 480V)

쑺One to six 100-250A adjustable distribution breakers (208V or 480V)

쑺One 225A distribution panel and one to three 100-250A adjustable

distribution breakers (208V only)

쑺One 225A distribution panel and one to three 40-100A adjustable

distribution breakers (208V only)

Introduction

1-2 EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

Figure 1-1. Powerware 9390 IAC-D Cabinet

Introduction

1-3

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

1.2 Using This Manual

This manual describes how to install and operate the Powerware 9390 IAC-D. Read and

understand the procedures described in this manual to ensure trouble-free installation and

operation.

The information in this manual is divided into the sections and chapters listed. At a

minimum, Chapters 1 through 3 and Chapter 5 should be examined.

쑺Chapter 1, “Introduction” – provides a brief description of the IAC-D, a description of

the content of each chapter, text conventions used in the manual, safety warnings, and

reference information.

Section I, Installation

쑺Chapter 2, “IAC-D Installation Plan and Unpacking” – explains how to prepare the site

for the installation of the IAC-D. It discusses equipment environmental requirements,

inspecting, and unpacking cabinets.

쑺Chapter 3, “Installing the IAC-D” – describes how to install and wire the IAC-D.

Section II, Operation

쑺Chapter 4, “Understanding IAC-D Operation” – provides information on how an IAC-D

works.

쑺Chapter 5, “IAC-D Features, Controls, and Operation” – describes the standard and

optional IAC-D features, the IAC-D controls, and how to use the IAC-D.

쑺Chapter 6, “Maintaining the IAC-D” – contains maintenance instructions for the IAC-D.

쑺Chapter 7, “Product Specifications” – provides specifications for the IAC-D.

쑺Appendix A, “Installation Information” – contains important information on wiring

requirements and recommendations, and important diagrams of the cabinets’

mechanical details and electrical access.

쑺Warranty – provides the Powerware warranty for this product.

Read through each procedure before beginning the procedure. Perform only those

procedures that apply to the IAC-D being installed or operated.

Introduction

1-4 EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

1.3 Conventions Used in This Manual

This manual uses these type conventions:

쑺Bold type highlights important concepts in discussions, key terms in procedures, and

menu options.

쑺Italic type highlights notes and new terms where they are defined.

쑺Screen type represents information that appears on the screen or LCD.

Icon Description

Information notes call attention to important features or instructions.

In this manual, the term UPS refers only to the UPS cabinet and its internal elements.

The term UPS system refers to the entire power protection system – the UPS cabinet, the

battery cabinet, the IAC-D, and options or accessories installed.

The term line-up–and–match refers to cabinets that are physically attached to the UPS,

and the wiring between them is internal. The term standalone refers to cabinets that are

not physically attached to the UPS, and are wired with external contractor-supplied wiring.

Tabla de contenidos

Otros manuales de Unión Postal Universal de Eaton

Eaton

Eaton Eaton 5PX Manual de usuario

Eaton

Eaton Powerware 9125 Manual de usuario

Eaton

Eaton 3C3-EX Series Manual de usuario

Eaton

Eaton Powerware 9120 Manual de usuario

Eaton

Eaton Powerware 9155 Manual de usuario

Eaton

Eaton Power Xpert 9395 550 Manual de usuario

Eaton

Eaton 93PM-150(400) Manual de usuario

Eaton

Eaton Eaton series Manual de usuario

Eaton

Eaton 5S 700 Manual de usuario

Eaton

Eaton Powerware 5125 Manual de usuario

Eaton

Eaton Powerware 9140 Manual de usuario

Eaton

Eaton 9PX5KiRTN Manual de usuario

Eaton

Eaton Single EBC Manual de usuario

Eaton

Eaton 9E Manual de usuario

Eaton

Eaton Power Xpert 9395 Manual

Eaton

Eaton 5P 1500 RT Manual de usuario

Eaton

Eaton DX 10000LXL Manual de usuario

Eaton

Eaton BladeUPS none Manual de usuario

Eaton

Eaton Power Xpert 9395 Manual del propietario

Eaton

Eaton 9E Manual de usuario

Eaton

Eaton Powerware 9155 Manual de usuario

Eaton

Eaton 93PM-L IAC-B Manual de usuario

Eaton

Eaton 550i Manual de usuario

Eaton

Eaton POWERWARE Plus 18 Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario

ZincFive

ZincFive BC Series Manual de usuario