Eaton PXM8K Series Manual de usuario
Figure 1. Dimensions of the PXM4/6/8K Meter Advanced Display - 12” Color Touchscreen (PXM468K-DISP-12).
8.94
(227)
13.31
(338.07)
Behind Panel Surface for Mounting Hardware
0.33
(8.4)
2.04
(51.7)
1.80
(45.7)
3.94
(100)
3.76
(95.5)
11.85
(301)
12.56
(319)
9.76
(248)
7.34
(186.4)
9.65
(245)
3.94
(100)
9.65
(245)
Behind Panel Surface for Mounting Hardware
Effective January 2017
Technical Data TD150019EN
PXM4/6/8K Meter Advanced Color
Touchscreen Display Quick Start Guide
For detailed information concerning the operation and features avail-
able in the PXM4/6/8K Meter Advanced Display - 12” Color Touch-
screen (PXM468K-DISP-12), please refer to the PXM4000/6000/8000
User and Installation manual (IM02601004E) available on the Eaton
website (www.eaton.com/meters) for information on Web Server
Screens.
Installation
1. Disconnect and lockout all power to the enclosure.
2. Inspect the enclosure door to determine the best mounting
location for the PXM4/6/8K Meter Advanced Color Touchscreen
Display.
ote:N A minimum clearance of 1 in. (25.4 mm) must be maintained
between the back of the display and any other component within the
enclosure.
3. Use the mounting template to mark the cutout area on the
enclosure door. Cut out the marked area.
Figure 2. PXM4/6/8K Meter Advanced Color Touchscreen Display.
Figure 3. Cut Out Dimensions.
9.02
(229)
11.93
(303)
Mounting Hole
2
Technical Data TD150019EN
Effective January 2017
PXM4/6/8K Meter Advanced Color
Touchscreen Display Quick Start Guide
EATON www.eaton.com
4. Insert the PXM4/6/8K Meter Advanced Color Touchscreen Display
through the cutout. After the display is inserted into the front
side of the cutout, secure the display by attaching the 8 supplied
fasteners to the rear perimeter of the display.
Figure 4. PXM4/6/8K Display Fasteners.
5. Check for proper alignment of the PXM4/6/8K Meter Advanced
Color Touchscreen Display then torque fasteners to 7 lb-in.
(0.8 N·m).
Figure 5. PXM4/6/8K Display Fasteners - Installed.
6. Set the PXM4/6/8K meter to Advanced Display mode by chang-
ing the Security Mode Dip Switches to OFF-OFF-ON. This dis-
ables the log-in screen when the Advanced Display is connected
to the Local Config. Port. The Local Config. Port should never be
connected directly to a network.
Connections
To use the PXM4/6/8K Meter Advanced Color Touchscreen Display,
provide power through the included connector. This display accepts
an input from 9-36 VDC with a maximum power consumption of 60
W.
ote:N A power supply must be purchased as it is not supplied with the dis-
play. Eaton recommends the following power supplies: PSG60E (85-264 Vac
input); PSG60F (320-575 Vac input).
The display’s plug-in terminals provide connections for +V, -V, and
floating ground.
Figure 6. Power and COM Port Connections for the PXM4/6/8K
Meter Advanced Color Touchscreen Display.
The PXM 4/6/8K Meter Advanced Color Touchscreen Display requires
a shielded RJ45 Ethernet cable. This connects directly to the Local
Configuration CM1 on PXMCM-1.
Figure 7. Power Port Connection.
LAN 2
To CM1
(Local Config. Port)
To DC Power Supply
Display Power Input Range:
9-36 VDC
Minimum 60 W
Security Mode Dip
Switches Configured
as OFF-OFF-ON
3
Technical Data TD150019EN
Effective January 2017
PXM4/6/8K Meter Advanced Color
Touchscreen Display Quick Start Guide
EATON www.eaton.com
Figure 8. COM Port Connections.
Commissioning the Display
When a display is first received, it needs to be paired to every meter
it will be connected to. On first power-up, the user will be brought
to a windows-style desktop environment in which to pair meters.
To pair a connected meter, open Internet Explorer from the quick
launch bar at the lower left of the screen. Select the “Install SSL
Certificate” link, located in the center of the black bar at the bottom
of the page.
Figure 9. SSL Certificate Link.
Then select “Root CA Certificate” to engage the security certificate.
The file titled “meter_ca.crt” will automatically download. Once the
file download is complete, click on the file in order for the prompt in
Figure 10 to appear.
Figure 10. Install Certificate.
LAN 1
(reserved for factory
configuration)
LAN 2
(local meter connection)
USB 2.0 (top)
USB 3.0 (bottom)
Alternative power
connection
Audio jack
COM 1 COM 2
4
Technical Data TD150019EN
Effective January 2017
PXM4/6/8K Meter Advanced Color
Touchscreen Display Quick Start Guide
EATON www.eaton.com
The user will be prompted to open the installer. Follow the prompts
to open the certificate to begin installation. Be sure to select
Trusted Root Certification Authorities as the certificate store.
After the certificate is successfully imported, the user may then
close all dialog boxes. The main window can be closed by the
hotspot in the upper right hand corner and closing out the window.
Figure 11. Follow Prompts to Open the Certificate.
To put the display in ‘display mode’, select the display mode icon
on the desktop and drag-and-drop it on into the startup folder (also
on the desktop). This enables the display to connect to the meter
immediately upon power up. To finish, power-cycle the display.
Figure 12. Display Mode Icons.
On future power-ups, when the device is properly connected to the
meter, a grey progress bar will begin to fill, in conjunction with the
meter’s power-up sequence. After the meter is ready, the main
screen of the meter interface should appear.
Figure 13. Main Screen of Meter Interface.
Display Hot-Spots
There are a handful of hot-spots that aid with meter navigation. An
on-screen keyboard can be called by tapping in the upper left corner.
The keyboard will be hidden when it is closed.
If connection to the meter is lost, tapping the top of the screen will
unhide a Refresh Bar with a button that re-establishes connection to
the meter. To hide this bar, tap the white space at either left or right
edge of the screen.
Figure 14. Display Hot Spots.
Tap the top of the
screen to unhide
the Refresh Bar
Tap the upper
left corner to
unhide on-
screen keyboard
Tap the white
space at the
side of the
screen to hide
Refresh Bar
5
Technical Data TD150019EN
Effective January 2017
PXM4/6/8K Meter Advanced Color
Touchscreen Display Quick Start Guide
EATON www.eaton.com
Connection with Multiple Meters
Figure 15. Meter Web Server Configuration Screen Com 1 & 2
Setup.
In order to communicate with multiple meters, the primary meter
must be configured as Master Gateway. Any additional meters must
be configured as Slave Gateway. This can be set using the meter’s
web server configuration page for Com 1 & 2.
Additional (slave) meters can be connected to the display by daisy-
chaining the RS 485 ports between meters. This configuration also
requires that each meter in the chain have a unique base address.
This can be set with the rotary switch located on the bottom left
side of the meter. Please reference the PXM4000/6000/8000 User
and Installation Manual for full details.
Remote access to Ethernet enabled features for 4/6/8K requires LAN
connection to PXMCE-B.
Meter Firmware Requirements
The minimum meter firmware version required for compatibility is
13.3.6.5.
Technical Information
• 1024 x 768 pixel backlit LCD graphic touch screen display.
• Power: 9–36 Vdc input.
• Recommended power supplies: PSG60E (85-264 Vac input);
PSG60F (320-575 Vac input).
Display Measurements
• Height: 9.65 in. (245 mm);
• Width: 12.56 in. (319 mm);
• Depth: 2.00 in. (52 mm);
• Shipping weight: 2.1 lb (2.5 kg);
• Cutout dimensions: 11.90 x 9.00 in. (303 x 229 mm).
Ratings
• Front Bezel IP Rating: IP65;
• Operating Temperature: 0 ~ 50° C (32 ~ 122° F);
• Storage Temperature: -20 ~ 60° C (-4 ~ 140° F);
• Storage Humidity: 10%~90%, non-condensing.
Technical Data TD150019EN
Effective January 2017
PXM4/6/8K Meter Advanced Color
Touchscreen Display Quick Start Guide
Eaton
Electrical Sector
1000 Eaton Boulevard
Cleveland, OH 44122
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. TD150019EN / TBG001242
January 2017
Eaton is a registered trademark.
All other trademarks are property of their
respective owners.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Pantalla táctil de Eaton
Eaton
Eaton XP-503 Manual de usuario
Eaton
Eaton HMi Series Manual
Eaton
Eaton PXBCM-DISP-6 Manual de usuario
Eaton
Eaton XV100 Manual de usuario
Eaton
Eaton Cutler-Hammer PanelMate Power Pro 1785... Guía
Eaton
Eaton iLIGHT TSE55 Manual de usuario
Eaton
Eaton iLumin Plus TSE80-B Manual de usuario
Eaton
Eaton 818-7242 Manual de usuario
Eaton
Eaton XV-102 Series Manual de usuario
Eaton
Eaton TSE80 Manual de usuario
Manuales populares de Pantalla táctil de otras marcas
Elecro Engineering
Elecro Engineering Poolsmart Plus Instrucciones de instalación
Johnson Controls
Johnson Controls IQ4 HUB Manual de usuario
Elo TouchSystems
Elo TouchSystems ET2270L Manual de usuario
Elo TouchSystems
Elo TouchSystems ET1002L Manual de usuario
Elo TouchSystems
Elo TouchSystems 3201L Manual de usuario
Duratec
Duratec S15 Manual de usuario
