Eaton ELC-EX08NNSN Manual de usuario

IL05003017E.pdf

5011640400-SN00

2005-11-15

ELC-EX08NNSN Switch Type of Digital Extension

Module Instruction Sheet

1 Warning

Carefully read this instruction sheet before operating ELC-EX08NNSN.

ELC-EX08NNSN is an OPEN-TYPE. Please place the module in an enclosure away from airborne dust or high

humidity and prevent electric shock or sudden shock on ELC-EX08NNSN. Also, it is equipped with protective

methods such as some special tool or key to open the enclosure, so as to avoid the hazard to users or any damage

to the module. Do NOT touch terminals when power on.

2 Introduction

1. Thank you for choosing EATON ELC series products. ELC-EX08NNSN shall be used together with ELC SLIM TYPE

with occupying 8 inputs. I/O can be extended up to 128 points including MPU’s. Besides, there are special extension

modules available for up to 8 units connection.

2. Directly execute instructions by switching X0~X7 without external power supply or external wiring for signal

receiving.

3. The module can be used as a digital switch by directly inputting instruction without external wiring to receive signal

that ensures much convenience and safety for end user or for academic use.

 Product Profile:

ELC-EX08NNSN

903

25.2

5.5

1X2

3.4

Unit: mm

1. DIN rail (35mm) 6. Inputs

2. Extension unit/module connection port 7. Fixing clip for extension module

3. Model name 8. Nameplate

4. LED indicators 9. Extension unit/module connector

5. DIN rail clip 10. Aiming pinhole for combining with MPU

IL05003017E.pdf

3 Specification

3.1. Electrical Specification

Model

Items ELC-EX08NNSN

Power voltage 24VDC (-15%~20%) (Power is supplied by the internal bus of MPU)

Consumption power 0.5W

Anti-interference

ability

ESD(IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge

EFT(IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV,

Analog & Communication I/O: 1KV

Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV

RS(IEC 61131-2, IEC 61000-4-3): 26MHz~1GHz, 10V/m

Operation/Storage Operation : 0℃~55℃(Temperature), 50~95% (Humidity), Pollution degree 2

Storage: -40℃~70℃(Temperature), 5~95% (Humidity)

Vibration/ Shock

resistance International standard: IEC1131-2, IEC 68-2-6（TEST Fc）/ IEC1131-2 & IEC 68-2-27 (TEST Ea)

Weight (g) 60g

4 Installation

1. Use a

screwdriver to

open the side

cover to reveal

the connecting

port.

2. Use a

screwdriver to

lift and

unfasten the

fixing clip.

3. Accurately

connect the

extension

module to the

MPU by using

the pinholes at

each corner.

4. Secure the

extension

module to the

MPU by

pushing down

the fixing clips.

5 Troubleshooting

 Input LED Indicator

The input status can be distinguished by the ON/OFF of the LED. When input is ON, LED will be lit. If error

happens, please check the loops of LED and input signal by using HHP/ELCSoft. Other attention items:

1. Do NOT place ELC-EX08NNSN under direct sunlight and put is away from overheating objects those may

heat up the temperature of the module and result in malfunction.

2. Periodically clean the airborne or conductive dust on the panel.

Otros manuales de Unidad de control de Eaton

Eaton

Eaton Powerware 9395 Manual de usuario

Eaton

Eaton PKE-SWD-CP Manual

Eaton

Eaton Vickers RF Series Manual de usuario

Eaton

Eaton Crouse-hinds series Manual de usuario

Eaton

Eaton SL4-SWD Series Manual

Eaton

Eaton ELC-MC01 Manual de usuario

Eaton

Eaton VICKERS DG3V-10 Series Manual de usuario

Eaton

Eaton CEAG 3-PM-IO Manual de servicio

Eaton

Eaton ELC-MC01 Manual de usuario

Eaton

Eaton CEAG CG IV Manual de usuario

Eaton

Eaton XMCSPAN-001 Guía

Eaton

Eaton Powerware Series Manual de usuario

Eaton

Eaton DX-LN1 Series Manual

Eaton

Eaton Form 4D Recloser Control Manual de usuario

Eaton

Eaton Crouse-hinds series Manual de usuario

Eaton

Eaton eNMC2 Manual de usuario

Eaton

Eaton MEMSHIELD 4 Manual de usuario

Eaton

Eaton DILM12-XMSM Manual

Eaton

Eaton XNE-2CNT-2PWM Manual de usuario

Eaton

Eaton EU1E-SWD Series Manual

Eaton

Eaton 145406 Instrucciones de instalación y funcionamiento

Eaton

Eaton CEAG DLS/3PH-BUS-Module-inverse Manual de servicio

Eaton

Eaton Power XL SmartWire-DT DX-NET-SWD1 Manual

Eaton

Eaton MSFI-125A Manual

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

Flyron

Flyron FN-BC04 Manual de usuario