Eastsign SOT-64 Manual de usuario
User Manual
Eastsign
SOT6420210201
Eastsign
Rotary Heat Press SOT-64H
User Manual
Eastsign
ROTARY HEAT PRESS SOT-64H USER MANUAL
Content
1. Information..............................................................................................................................................1
2. Safety Instruction.....................................................................................................................................2
2.1 Safety parts...............................................................................................................................................2
2.2 Warning Sign ............................................................................................................................................2
2.3 Safety Tips ................................................................................................................................................3
3. Specifications...........................................................................................................................................5
3.1 Specifications of the Machine..................................................................................................................5
3.2 Nameplate................................................................................................................................................6
4. Structure..................................................................................................................................................7
4.1 Explanation of appearance and all parts..................................................................................................7
4.2 Configuration of left cabinet ....................................................................................................................8
4.3 Configuration of right cabinet ..................................................................................................................8
5. Installation...............................................................................................................................................9
5.1 Unpacking.................................................................................................................................................9
5.2 Installation of worktable ..........................................................................................................................9
5.3 Notice.....................................................................................................................................................10
6. Operation Guide .................................................................................................................................... 11
7. Notice for operation............................................................................................................................... 12
7.1 Pre-shrink on blanket .............................................................................................................................12
7.2 Accomplish the procedure of pre-shrink on blanket based on following data sheet:............................12
7.3 Horizontal adjustment............................................................................................................................13
7.4 Heating system.......................................................................................................................................14
8. Processes Diagram .................................................................................................................................15
9. Trouble Shooting....................................................................................................................................16
Warranty ...................................................................................................................................................17
Limitation of liability.................................................................................................................................. 18
Contact us.................................................................................................................................................. 19
Eastsign
1
ROTARY HEAT PRESS SOT-64H USER MANUAL
1. Information
Rotary Heat Press SOT-64H is developed on the basis of continuous feedback from end users and market
requirements. It is entry level equipment for polyester thermal transfer. It is capable of flat transfer for clothes
pieces, transfer in roll to roll or piece to piece and thermal transfer for polyester materials. Moreover, the
machine occupies small workplace. It reduces expenses in terms of power and labor.
There are many merits of SOT series machine as below.
1. Most of shafts of the machine were processed by CNC cutting system precisely, which means all shafts are
equipping at parallel. It enables the ultra-long transfer without tracking.
2. The heating roller is made of stainless steel, CNC forming ensure smoothness of the surface of roller, and
uniform heating on the roller. In addition, more than 70% of the roller surface is covered by blanket, it’s
enable to reduce the missing of heat and ensure a good transfer result.
3. The chosen balance shafts in 87mm diameter which processed with CNC technique which keeps it rigid
and prevents it from deforming. Thus, transfer paper does not curl and ripple pattern doesn’t appear on
media.
4. The machine is designed to feed materials from upper position, which keeps fabric feeding precisely and
lower the fault rate in process.
5. High-quality blanket: Outstanding dimensional stability: at temperature of 250 ℃, only less than 1% of
thermal shrinkage, with excellent high temperature stability.
Eastsign
2
ROTARY HEAT PRESS SOT-64H USER MANUAL
2. Safety Instruction
Before the operation, please read the safety instruction carefully to fully understand the machine’s primary
structure, function, and operation method. If conditions permit, the training to the operators is required, and
the operators, passing the examination, are allowed to operate and maintain. During the operation and
maintenance, please pay attention to the warning signs, pasted to the equipment, and improve the safety
awareness to prevent the accidents and to guarantee operator’s personnel safety.
2.1 Safety parts
2.1.1 Heat switch and Power switch
Heat switch and Power switch both are on the control panel. Press the heat power to stop the heating
immediately. Turn off the power button; the machine can not get the power for heating, but the machine can
get power for revolving the motor.
2.1.2 Blanket maintenance
When the heat transfer finishes its working, turn off heating and keep motor rotating until the temp decline
under 80 ℃to prevent the blanket from burning.
2.1.3 Heating Roller
Following heating, the surface temperature of the heating roller could be up to over 240°C. While it is
heating, please don’t touch the roller surface with any part of the body to avoid crushing or burning. When
the machine is heating and operating, the operators shall be present to avoid the roller damages or the fire
due to the overheating.
2.2 Warning Sign
Please pay attention to the following warning signs. The cases shown in the signs are likely to cause machine
damages or injuries of the operators.
Anti-grinding
This sign is shown at the junction of the upper and lower drive
rollers, respectively at the both sides of the machine front. The
rubber roller in operation is relative dangerous. Please don’t let
your hand, clothes, hair or other parts of your body touch it to
avoid incident.
Eastsign
3
ROTARY HEAT PRESS SOT-64H USER MANUAL
High Voltage
This sign is shown at the inner flank of the box.
High Voltage! Don’t touch to avoid electric shock.
Chain
This sign is shown at the inner flank of the left box.
Please don’t let your hand, clothes, hair or other parts of your
body
touch the chain in operation to avoid injury.
Burning Prevention
This sign is shown at front of cabinet near the heating oil drum.
The oil drum with black Teflon coating is the heating component,
so don’t touch it. When the power is off, oil drum requires enough
time for heat output. Don’t touch it immediately to avoid burning
incident.
2.3 Safety Tips
1. The electrical power source, used for the equipment must be in line with the type, designated by the
nameplate. The earthing must be accurate and reliable (equipment with three-terminal polarized plus
plug not allowed to change the function of the earth electrode freely).
2. When the equipment is operating normally, the surface temperature of the heating roller is very high,
and please don’t touch it with you hand.
3. When open the box to exam and fix of the equipment, the power must be shut off to avoid electric shock
or mechanical wounding incidents. When the transfer work has been finished the power should be cut off
too.
4. Don’t place the power lead on the walkway or pile up good on the lead. Strictly prevent the power lead
from rolling depression by the vehicles.
Eastsign
4
ROTARY HEAT PRESS SOT-64H USER MANUAL
5. Mounting card and transducer in the box should be kept clean to avoid metallic conduction material such
as dust falling into. Don’t open the protective covering to avoid the electric shock.
6. The working place should be dry and well ventilated. Please stay away from the water or the damp place
when use the equipment. Don’t pile up the inflammable or explosive materials near to the equipment.
7. Don’t put tools or other sundries, such as screwdriver, screw nail and nut etc. at the worktable, upper
surface of the right box and other parts of the machine, to avoid falling into the rotating rollers, causing
damages to the machine.
8. Don’t wash the machine with water to avoid the short circuit, electric shock and the equipment
corrosion.
Eastsign
5
ROTARY HEAT PRESS SOT-64H USER MANUAL
3. Specifications
3.1 Specifications of the Machine
Model
SOT-64
SOT-64H
Cylinder
Oil-Heated, 50% Full
Voltage
1 or 3 Phase, 220V
Heating Power
9KW
Heating Element
9
Diameter of Drum
260mm or 10"
Transfer Speed
Up to 0.5m/min or 5.4'/min
Max Temperature
240°C or 464°F
Transfer Width
1630mm or 64"
Process Path
Feeding in through Top of The Drum
Roll-to-Roll
Y
Piece-to-Piece
Y
Feeding Rollers
3
Collecting Rollers
3
Working Table
Yes
Felt Release
Yes
Auto Felt Alignment
No
Yes
Tension Bar Subassembly
3
Machine Dimension
2450mmx 720mm x 1400mm
96" x 28" x 55"
2450mmx 720mm x 1400mm
96" x 28" x 55"
Working table Size
1900mm x 670mm x 950mm
75" x 26" x 37"
1900mm x 670mm x 950mm
75" x 25" x 37"
Packing Size
2630mm x 950mm x 1640mm
104" x 37"x 65"
2630mm x 950mm x 1640mm
104" x 37"x 65"
Net Weight
850kg or 1874lb
850kg or 1874lb
Gross Weight
1000kg or 2205lb
1000kg or 2205lb
Eastsign
6
ROTARY HEAT PRESS SOT-64H USER MANUAL
3.2 Nameplate
Eastsign
7
ROTARY HEAT PRESS SOT-64H USER MANUAL
4. Structure
4.1 Explanation of appearance and all parts
Eastsign
8
ROTARY HEAT PRESS SOT-64H USER MANUAL
4.2 Configuration of left cabinet
4.3 Configuration of right cabinet
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Herramientas eléctricas de Eastsign
