Eastsign MOT-M Manual de usuario
User Manual
Eastsign
MOTM20210302
Eastsign
Rotary Heat Press MOT-M
User Manual
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
Content
1. Information..............................................................................................................................................1
2. Safety Instruction.....................................................................................................................................2
2.1 Safety parts...............................................................................................................................................2
2.2 Warning Sign ............................................................................................................................................2
2.3 Safety Tips ................................................................................................................................................3
3. Specifications...........................................................................................................................................5
3.1 Specifications of the Machine..................................................................................................................5
3.2 Nameplate................................................................................................................................................6
4. Structure..................................................................................................................................................7
4.1 Explanation of appearance and all parts..................................................................................................7
4.2 Configuration of left cabinet ....................................................................................................................9
4.3 Configuration of right cabinet ..................................................................................................................9
4.4 Power box...............................................................................................................................................10
4.5 Accessories list .......................................................................................................................................11
5. Installation.............................................................................................................................................13
5.1 Unpacking...............................................................................................................................................13
5.2 Installation of worktable ........................................................................................................................13
5.3 Notice.....................................................................................................................................................14
6. Function.................................................................................................................................................15
7. Operation Guide .................................................................................................................................... 16
8. Notice for operation............................................................................................................................... 17
8.1 Adjustment to blanket tracking..............................................................................................................17
8.2 Noise ......................................................................................................................................................17
8.3 Cleaning..................................................................................................................................................17
8.4 Lubricating..............................................................................................................................................17
8.5 Blanket....................................................................................................................................................17
8.6 Changing of oil........................................................................................................................................18
9. Sketch up of Processing..........................................................................................................................20
9.1 Transfer of Garment in sheets................................................................................................................20
9.2 Transfer of both picture paper and fabric in rolls...................................................................................20
9.3 Transfer of fabric in rolls.........................................................................................................................21
9.4 Transfer of picture paper in sheets.........................................................................................................21
10. Circuit Diagram .................................................................................................................................... 22
11. Trouble Shooting.................................................................................................................................. 23
Warranty ...................................................................................................................................................24
Limitation of liability.................................................................................................................................. 25
Contact us.................................................................................................................................................. 26
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
1
1. Information
Rotary Heat Press MOT-1742M is developed on the basis of continuous feedback from end users and market
requirements. It is the most advanced equipment for cotton cold transferring. It is capable of flat transfer for
clothes pieces, transfer in roll to roll and cold transfer for cotton materials. Moreover, the machine occupies
small workplace. It reduces expenses in terms of power and labor.
There are many merits of MOT series machine as below.
1. Most of shafts of the machine were processed by CNC laser cutting system precisely, which means all
shafts are equipping at parallel. It enables the ultra-long transfer without tracking.
2. The heating roller is equipped in double layers of heat insulation, which means it saves about 30% to 40%
energy consumption comparing with other similar machines.
3. The chosen balance shafts in 87mm diameter which processed with CNC technique which keeps it rigid
and prevents it from deforming. Thus, transfer paper does not curl and ripple pattern doesn’t appear on
media.
4. Air pressure system helps transfer with vivid color and definition as good as the heat pressing transfer
machine. It also has high productivity of roll to roll system.
5. The machine is designed to feed materials from upper position, which keeps fabric feeding precisely and
lower the fault rate in process.
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
2
2. Safety Instruction
Before the operation, please read the safety instruction carefully to fully understand the machine’s primary
structure, function, and operation method. If conditions permit, the training to the operators is required, and
the operators, passing the examination, are allowed to operate and maintain. During the operation and
maintenance, please pay attention to the warning signs, pasted to the equipment, and improve the safety
awareness to prevent the accidents and to guarantee operator’s personnel safety.
2.1 Safety parts
2.1.1 Heat switch and Power switch
Heat switch and Power switch both are on the control panel. Press the heat power to stop the heating
immediately. Turn off the power button; the machine can not get the power for heating, but the machine can
get power for revolving the motor.
2.1.2 Separating blanket Switch
When the heat transfer finishes its working, turn off heating and keep motor rotating until the temp decline
under 80 ℃to prevent the blanket from burning.
2.1.3 Heating Roller
Following heating, the surface temperature of the heating roller could be up to over 240°C. While it is
heating, please don’t touch the roller surface with any part of the body to avoid crushing or burning. When the
machine is heating and operating, the operators shall be present to avoid the roller damages or the fire due to
the overheating.
2.2 Warning Sign
Please pay attention to the following warning signs. The cases shown in the signs are likely to cause machine
damages or injuries of the operators.
Anti-grinding
This sign is shown at the junction of the upper and lower drive
rollers, respectively at the both sides of the machine front. The
rubber roller in operation is relative dangerous. Please don’t let
your hand, clothes, hair or other parts of your body touch it to
avoid incident.
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
3
High Voltage
This sign is shown at the inner flank of the box.
High Voltage! Don’t touch to avoid electric shock.
Chain
This sign is shown at the inner flank of the left box.
Please don’t let your hand, clothes, hair or other parts of your
body
touch the chain in operation to avoid injury.
Burning Prevention
This sign is shown at front of cabinet near the heating oil drum.
The oil drum with black Teflon coating is the heating component,
so don’t touch it. When the power is off, oil drum requires enough
time for heat output. Don’t touch it immediately to avoid burning
incident.
2.3 Safety Tips
1. The electrical power source, used for the equipment must be in line with the type, designated by the
nameplate. The earthing must be accurate and reliable (equipment with three-terminal polarized plus
plug not allowed to change the function of the earth electrode freely).
2. When the equipment is operating normally, the surface temperature of the heating roller is very high,
and please don’t touch it with you hand.
3. When open the box to exam and fix of the equipment, the power must be shut off to avoid electric shock
or mechanical wounding incidents. When the transfer work has been finished the power should be cut off
too.
4. Don’t place the power lead on the walkway or pile up good on the lead. Strictly prevent the power lead
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
4
from rolling depression by the vehicles.
5. Mounting card and transducer in the box should be kept clean to avoid metallic conduction material such
as dust falling into. Don’t open the protective covering to avoid the electric shock.
6. The working place should be dry and well ventilated. Please stay away from the water or the damp place
when use the equipment. Don’t pile up the inflammable or explosive materials near to the equipment.
7. Don’t put tools or other sundries, such as screwdriver, screw nail and nut etc. at the worktable, upper
surface of the right box and other parts of the machine, to avoid falling into the rotating rollers, causing
damages to the machine.
8. Don’t wash the machine with water to avoid the short circuit, electric shock and the equipment
corrosion.
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
5
3. Specifications
3.1 Specifications of the Machine
Model
MOT-1742M
MOT-2742M
MOT-3242M
Cylinder
Oil-Heated, 50% Full
Voltage
3 phase, 220V / 380V / 480V
Heating Power
26kW
41kW
48kW
Heating
Elements
15
27
33
Diameter of Drum
420mm or 16.5" (Available in 600mm/800mm), Double Layer
Transfer Speed
1.5m-2.5m/min
Max Temperature
240°C or 464°F
Transfer Width
1600mm or 63"
2500mm or 98"
3150mm or 124"
Felt Width
1700mm or 67"
2600mm or 102"
3250mm or 128"
Process Path
Feeding in through Top of The Drum
Roll-to-Roll
Y
Piece-to-Piece
Y
Feeding Rollers
3
Collecting Rollers
2
Working Table
Yes, But glass will not be included
Machine
Dimension
2450 x 985 x 1320mm
96" x 39" x 51"
3290 x 985 x 1320mm
130" x 39" x 51"
4010 x 985 x 1320mm
158" x 39" x 51"
Working Table
Size
1860 x 1920 x 970mm
73" x 75" x 38"
2860 x 1920 x 970mm
113" x 75" x 38"
3360 x1920 x 970mm
132" x 75" x 38"
Packing Size
2650 x 1300 x 1650mm
104" x 51" x 65"
3600 x 1500 x 1750mm
141" x 59" x 69"
4300 x 1700 x 1880mm
169" x 67" x 74"
Net Weight
1600kg or 3527lb
2000kg or 4409lb
2680kg or 5908lb
Gross Weight
1700kg or 3748lb
2200kg or 4850lb
2764kg or 6094lb
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
6
3.2 Nameplate
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
7
4. Structure
4.1 Explanation of appearance and all parts
(1) left box
(11) supporting shaft
(tissue paper)
(27) left screw rod
(2) control panel
(12) blanket
(28) speed retarder
(pic paper)
(3) speed adjustor
(13)(14)(18)(19)(22)(27)
structural bar
(29) Speed retarder
(fabric)
(4) temperature control device
(15) left stand
(30) pic paper lading bar
(5) tension knob
(16) socket (17) electric
(31) tension adjusting bar
(pic paper)
(6) power indicator
socket for worktable
(32) tension adjusting bar
(fabric)
(7) heating button
(20) (21) (23) balance shaft
(33) fabric lading bar
(8) converter startup button
(24) Wheel box
(34) supporting shaft
(9) general power supply button
(25) speed adjustor
(35) (36) (37)
worktable connector
(10) tension adjusting bar
(tissue paper)
(26) screw rod
(38) right stand
Eastsign
ROTARY HEAT PRESS MOT-M USER MANUAL
8
(39) pic paper collector
(45) (46) air pressure switch
(for upper cylinder)/
(for lower cylinder)
(50) speed adjustor
(40) motor
(51) tissue paper
(41) right screw road
(52) motor
(42) belt driven shaft
(47) glasses
(53) air inlet port
(43) belt
(48) balance shaft
(54) fan
(44) right box
(49) tissue paper lading bar
(55) separate hand wheel
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Herramientas eléctricas de Eastsign
