E-Lux Sierra Classic Manual de usuario
2| Page
Dear New E-Lux Owner,
Thank you so much for purchasing your new E-Lux
Sierra GT we welcome you to a world of new possibilities!
With your new electric bike you will be able ride farther, faster
and easier than ever before on a bicycle which equates to
Fun, Fun and more Fun! All while travelling for less than half
a cent a mile - it’s not only good for your wallet but it’s good
for the planet!
If you have any questions, suggestions, concerns, or if you
just want to say “Hi!” - Please feel free to drop us a line at
Wishing you Miles of Smiles on your E-Lux bike!
From,
Jerry and J.P.
Co-Founders of E-Lux Electric Bikes
3 | Page
Table of Contents
Carton/Box Contents ................................................................................4
Assembly ...................................................................................................4
Understanding the Display and Display Settings ......................................8
Folding Your Sierra..................................................................................16
Battery Care and Charging ......................................................................19
Battery Removal......................................................................................21
Battery Life..............................................................................................23
Before Your First Ride…. .........................................................................24
Stopping the Motor.................................................................................27
Brakes......................................................................................................28
Gears .......................................................................................................29
Tires......................................................................................................... 30
Appearance and Care..............................................................................31
Commonly Asked Questions ...................................................................31
Technical Assistance ...............................................................................32
Important! Read Before Riding!..............................................................33
One Year Limited Warranty (Battery Three Years) .................................34
Recording Your E-Lux Bike Information ..................................................38
4| Page
Carton/Box Contents
CAUTION – Please use care when opening box with sharp objects to
avoid cutting any bicycle parts inside.
After opening please check the box for the following contents:
1. Bicycle
2. Handlebar
3. Small box containing battery charger.
4. Small pouch containing tools.
5. Small box containing welcome letter, E-Lux sticker, manual
and information on registering your E-Lux.
Assembly
E-Lux suggests taking your electric bike to a professional bike
technician for assembly. This can be done for a nominal fee at your
local bike shop. If you are comfortable assembling it on your own
then please refer to the directions below. You can also view our
assembly video on our website at www.eluxbikes.com/assembly.
What You Will Need
1. Scissors
2. 15 mm wrench
3. 4/5/6 mm Allen wrenches
4. All purpose grease
5. Air pump and tire pressure gauge. (Tires 20-25 PSI)
WARNING – When removing packaging and zip ties do not use box
cutters or knives as you may damage paint or tires. We suggest a pair of
scissors.
5 | Page
1. Remove the packing and tape from around bicycle.
2. Carefully cut the zip ties holding the handlebars to the frame.
3. Place bike upright on wheels and kickstand.
4. Apply a small amount of grease inside of the gooseneck tube as
well as the threads and slider on stem of gooseneck.
5. Making sure that all wires and cables are facing front and not
twisted; install handlebar into handlebar stem tightening the bolt
on the handlebar stem using an Allen wrench.
6. Pull the seat clamp handle out from the seat post to release
pressure allowing you to remove the seat. Remove seat post and
apply a small bit of grease inside seat tube. Then replace seat.
6| Page
7. CAUTION – When installing pedals there are two separate
pedals for the left and right sides of the bike. They have
different thread patterns and it is important to be sure each is
installed on the correct side of the bike to avoid stripping the
threads. The following procedure is performed so that when the
bike is pedaled it tightens the pedals.
8. Apply small amount of grease on pedal threads.
9. RIGHT PEDAL – Facing the bike from the chain side, place
pedal with R on the end of its bolt on chain side of bike and
tighten by turning clockwise (top of wrench turning towards the
front of bike as noted in the picture below). Tighten pedal very
tight.
**WARNING: If you do not tighten pedal very tight, it will
fall off and strip the threads or the crank arms.**
7 | Page
10. LEFT PEDAL – Facing the bike from the kickstand side, place
remaining pedal on the kickstand side of bike and tighten by
turning counter clockwise (top of wrench turning towards the
front of bike as noted in the picture below.) Tighten pedal very
tight.
11. Align seat on seat post to your comfort (typically hip height).
12. The recommended tire pressure for the Sierra is 20-25 PSI MAX
NO LOWER THAN 15 PSI
8| Page
Understanding the Display and Display Settings
1. To power the bike on tap the power button.
2. To backlight display and turn on front and rear lights, tap the power
button a second time.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Scooter de E-Lux
