Dynapac DRP15X Manual de usuario
Operang Instrucon
Original Operang Instrucons
DRP15X
Reversible plate
S/N 101 924 41 1001>
DL8 203 84 EN ©
07/2018
2
Table of contents
1 Introduction........................................................................................................................................... 7
1.1 Foreword........................................................................................................................................ 8
1.2 Machine type plate and engine type plate................................................................................ 10
2 Technical data...................................................................................................................................... 11
2.1 Noise and vibration data............................................................................................................ 14
2.1.1 Noise data.................................................................................................................................. 14
2.1.2 Vibration data............................................................................................................................. 14
3 Concerning your safety...................................................................................................................... 15
3.1 Basic prerequisites..................................................................................................................... 16
3.1.1 General...................................................................................................................................... 16
3.1.2 Explanation of signal words used:.............................................................................................. 16
3.1.3 Personal protective equipment................................................................................................... 17
3.1.4 Intended use.............................................................................................................................. 18
3.1.5 Improper use.............................................................................................................................. 18
3.2 Definition of responsible persons............................................................................................. 20
3.2.1 Operating company.................................................................................................................... 20
3.2.2 Expert / qualified person............................................................................................................ 20
3.2.3 Driver / operator......................................................................................................................... 20
3.3 Basic safety regulations for safe operation............................................................................. 22
3.3.1 Remaining dangers, remaining risks.......................................................................................... 22
3.3.2 Regular safety inspections......................................................................................................... 22
3.3.3 Modifications and alterations to the machine............................................................................. 22
3.3.4 Damage, defects, misuse of safety devices............................................................................... 22
3.4 Handling fuels and lubricants.................................................................................................... 23
3.4.1 Preliminary remarks................................................................................................................... 23
3.4.2 Safety regulations and environmental protection regulations for handling gasoline.................. 24
3.4.3 Safety regulations and environmental protection regulations for handling fuel stabiliser........... 25
3.4.4 Safety regulations and environmental protection regulations for handling oil............................ 26
3.4.5 Safety regulations and environmental protection regulations for handling hydraulic oil............. 27
3.5 Loading/transporting the machine............................................................................................ 28
3.6 Start-up procedure...................................................................................................................... 29
3.6.1 Prior to starting up...................................................................................................................... 29
3.6.2 Starting the engine..................................................................................................................... 29
3.7 Operation..................................................................................................................................... 30
3.7.1 Persons in the danger area........................................................................................................ 30
3.7.2 Operation................................................................................................................................... 30
3.7.3 Parking the machine.................................................................................................................. 30
3.8 Refuelling..................................................................................................................................... 31
3.9 Maintenance work....................................................................................................................... 32
3.9.1 Preliminary remarks................................................................................................................... 32
3.9.2 Working on the engine............................................................................................................... 32
3.9.3 Cleaning work............................................................................................................................ 32
3.9.4 After maintenance work............................................................................................................. 32
3.10 Repair......................................................................................................................................... 33
Table of contents
DRP15X
3
3.11 Signage...................................................................................................................................... 34
4 Indicators and control elements........................................................................................................ 39
4.1 Machine........................................................................................................................................ 40
4.2 Engine.......................................................................................................................................... 41
5 Checks prior to start up...................................................................................................................... 43
5.1 Notes on safety........................................................................................................................... 44
5.2 Visual inspections and function tests....................................................................................... 45
5.3 Checking the engine oil level..................................................................................................... 46
5.4 Checking the fuel level; topping up fuel................................................................................... 47
5.5 Checking the rubber buffers...................................................................................................... 48
5.6 Checking the water level, topping up........................................................................................ 49
6 Operation............................................................................................................................................. 51
6.1 Folding down the steering rod................................................................................................... 52
6.2 Starting the engine...................................................................................................................... 53
6.3 Operation..................................................................................................................................... 57
6.4 Switching the water spraying system on/off............................................................................ 59
6.5 Parking the machine in secured condition............................................................................... 60
7 Loading / transporting the machine.................................................................................................. 61
7.1 Loading the machine.................................................................................................................. 62
7.2 Lashing the machine to the transport vehicle.......................................................................... 63
7.3 Transport wheels......................................................................................................................... 64
8 Maintenance........................................................................................................................................ 67
8.1 Preliminary remarks and safety notes...................................................................................... 68
8.2 Fuels and lubricants................................................................................................................... 69
8.2.1 Engine oil................................................................................................................................... 69
8.2.2 Fuel............................................................................................................................................ 69
8.2.3 Oil for exciter shaft housing........................................................................................................ 70
8.2.4 Mineral oil based hydraulic oil.................................................................................................... 70
8.3 List of fuels and lubricants........................................................................................................ 71
8.4 Running-in instructions.............................................................................................................. 72
8.4.1 General...................................................................................................................................... 72
8.4.2 After 25 operating hours............................................................................................................. 72
8.5 Maintenance Table...................................................................................................................... 73
8.6 Weekly.......................................................................................................................................... 74
8.6.1 Checking, cleaning the air filter.................................................................................................. 74
8.7 Semi-annually.............................................................................................................................. 77
8.7.1 Changing the engine oil............................................................................................................. 77
8.8 Annually....................................................................................................................................... 78
8.8.1 Replacing the spark plug............................................................................................................ 78
8.8.2 Checking, adjusting the valve clearance.................................................................................... 78
8.8.3 Cleaning the slurry filter and fuel strainer................................................................................... 80
8.8.4 Replacing the air filter................................................................................................................ 83
8.8.5 Replacing the V-belt................................................................................................................... 84
8.8.6 Replacing the starter rope.......................................................................................................... 86
8.8.7 Changing the oil in the exciter housing...................................................................................... 87
Table of contents
DRP15X
4
8.8.8 Checking the hydraulic oil level.................................................................................................. 89
8.9 Every 2 years / every 500 operating hours............................................................................... 91
8.9.1 Changing the hydraulic oil.......................................................................................................... 91
8.10 As required................................................................................................................................ 93
8.10.1 Cleaning the water spraying system........................................................................................ 93
8.10.2 Cleaning the cooling fins and the cooling air intake openings................................................. 93
8.10.3 Checking, cleaning the spark plug........................................................................................... 95
8.10.4 Servicing the V-belt.................................................................................................................. 96
8.10.5 Checking the oil level in the exciter housing............................................................................ 97
8.10.6 Cleaning the machine.............................................................................................................. 97
8.10.7 Measures for longer shut-down periods................................................................................... 98
9 Troubleshooting................................................................................................................................ 101
9.1 Preliminary remarks.................................................................................................................. 102
9.2 Malfunctions during operation................................................................................................ 103
9.3 Engine malfunctions................................................................................................................. 104
9.4 What to do if the engine has flooded...................................................................................... 106
10 Disposal............................................................................................................................................. 109
10.1 Final shut-down of machine................................................................................................... 110
Table of contents
DRP15X
5
Table of contents
DRP15X
6
1 Introduction
Introduction
DRP15X
7
1.1 Foreword
These operating and maintenance instructions are part of your
machine.
They provide necessary information to operate your machine
safely and properly.
They also contain information on required operating, maintenance
and repair measures.
Carefully read the operating and maintenance instructions before
taking your machine into operation.
Please observe the safety regulations strictly and follow all instruc-
tions to ensure safe operation.
If you are not yet acquainted with the indicators and control ele-
ments on this machine, you should thoroughly read the corre-
sponding chapter
Ä
Chapter 4 „Indicators and control ele-
ments“ on page 39.
The description of the individual operating steps including the
notes on safety to be followed can be found in chapter “Operation”
Ä
Chapter 6 „Operation“ on page 51.
Before every start up, carry out all required visual inspections and
function tests
Ä
Chapter 5 „Checks prior to start up“ on page 43.
Ensure the compliance with the specified operating, maintenance
and repair measures to maintain the functional safety of your
machine.
A description of all necessary maintenance work, maintenance
intervals as well as information on fuels and lubricants can be
found in the chapter “Maintenance”
Ä
Chapter 8 „Mainte-
nance“ on page 67.
Do not service or repair your machine by yourself to avoid harming
persons or damaging material or environment.
The machine must only be serviced and repaired by qualified and
authorised personnel.
Contact our customer service to carry out the required mainte-
nance work or necessary repairs.
In case of operating errors, inadequate maintenance or the use of
unapproved fuels and lubricants all warranty claims will become
null and void.
For your own personal safety you should only use original parts
from Dynapac.
For your machine we offer service kits to make maintenance
easier.
In the course of technical development we reserve the right for
technical modifications without prior notification.
These operating and maintenance instructions are also available in
other languages.
Apart from that, you can also order the spare parts catalogue
against the serial number of your machine.
Introduction – Foreword
DRP15X
8
The above notes do not constitute an extension of the warranty
and liability conditions specified in the general sales and delivery
conditions of Dynapac GmbH.
We wish you successful work with your Dynapac machine.
Introduction – Foreword
DRP15X
9
1.2 Machine type plate and engine type plate
Please enter here:
Machine type (1):
Serial number (2):
Please enter here:
Engine type:
Engine number:
Made by
Designation Type
Nominal Power Operating Mass Year of Construction
Serial-No.
Made in Germany
Ammerländer Str. 93
D-26203 Wardenburg
1
2
B-924-0001
Fig. 1: Machine type plate (example)
Engine type and engine number
Fig. 2
Introduction – Machine type plate and engine type plate
DRP15X
10
Tabla de contenidos
Otros manuales de Herramientas eléctricas de Dynapac
Dynapac
Dynapac DRP25D Manual de usuario
Dynapac
Dynapac VB 340V Manual de usuario
Dynapac
Dynapac LH800 Guía de solución de problemas
Dynapac
Dynapac LG140 Manual
Dynapac
Dynapac BG70 Manual del instalador
Dynapac
Dynapac DFP9 Manual de usuario
Dynapac
Dynapac DRP20 Manual de usuario
Dynapac
Dynapac LF90 Guía de solución de problemas
Dynapac
Dynapac DFP10D Instrucciones de uso
Dynapac
Dynapac DFP12D Manual de usuario
