Dynabrade Dynorbital EXTREME X31V Manual de usuario

Disassembly Instructions – Mini Vacuum Dynorbital EXTREME

Models: X31V

Important: Disconnect sander from the air supply.

Notice: Use these instructions along with the tool manual. To avoid damage, use the

special repair tools designed for motor disassembly and assembly. Position 57092

Repair Collar around the housing. Fasten sander in vise with sanding pad facing up.

Do not over tighten sander in vise. Use 95263 Wrench (17 mm) to hold the balancer

shaft stationary.

To remove sanding pad, turn counterclockwise.

Motor Disassembly:

1. Use 56061 Lock Ring Wrench to remove 59415 Lock Ring.

 Turn counterclockwise.

2. Remove motor from housing.

 Remove 01024 O-Ring from 59412 Cylinder Sleeve Adapter.

 Remove lock ring 59415 from motor assembly

3. Fasten 96346 Bearing Separator (2") around 59411 Cylinder Sleeve. Place

bearing separator and motor in 96232 Arbor Press (#2) with counterweight

pointing down.

 Use arbor press and 5/16" or 8 mm diameter flat-end drive punch to push shaft

out of 01139 Bearing.

 Remove 59411 Cylinder Sleeve & 59412 Cylinder Sleeve Adaptor

4. Use 96214 Bearing Removal Tool to remove 01139 Bearing from 59405 Rear

Bearing Plate.

5. Remove vanes, rotor and key.

6. Use bearing separator and arbor press to remove the front bearing plate.

7. Fasten bearing separator between 58368 Bearing and the counterweight.

 Place bearing separator in arbor press with counterweight pointing down.

 Push shaft balancer from 58368 Bearing.

Motor disassembly completed.

Balancer Shaft and Bearing Disassembly:

1. Fasten counterweight in vise with hex of 59406 Balancer Shaft pointing up.

 Use a thin slot-blade screwdriver as a pick to remove 95613 Snap Ring.

(Next three views.)

Otros manuales de Lijadora de Dynabrade

Dynabrade

Dynabrade 50320 Manual de usuario

Dynabrade

Dynabrade 50371 Instrucciones de instalación

Dynabrade

Dynabrade 53271 Guía

Dynabrade

Dynabrade 51350 Instrucciones de instalación

Dynabrade

Dynabrade 53251 Guía

Dynabrade

Dynabrade 53521 Guía

Dynabrade

Dynabrade 18066 Guía

Dynabrade

Dynabrade Dynangle 14200 Manual de usuario

Dynabrade

Dynabrade 10390 Guía del usuario

Dynabrade

Dynabrade 56801 Manual de usuario

Dynabrade

Dynabrade Dynorbital-Spirit 21000 Manual

Dynabrade

Dynabrade 09L1000 Manual de usuario

Dynabrade

Dynabrade 48500 Guía

Dynabrade

Dynabrade 10787 Guía

Dynabrade

Dynabrade Mini-Dynorbital Silver Supreme 69500 Guía

Dynabrade

Dynabrade 52596 Manual de usuario

Dynabrade

Dynabrade 58040 Manual de usuario

Dynabrade

Dynabrade Electric Dynafile II 40590 Guía

Dynabrade

Dynabrade 58035 Manual de instalación y operación

Dynabrade

Dynabrade 10700 Manual de usuario

Dynabrade

Dynabrade Dynalocke 58430 Manual

Dynabrade

Dynabrade 57220 Guía del usuario

Dynabrade

Dynabrade 50348 Manual de usuario

Dynabrade

Dynabrade 50304 Manual de usuario

Manuales populares de Lijadora de otras marcas

Oliver

Oliver 6305 Manual de usuario

Jet

Jet 22-44 Pro-3 Manual de servicio

Makita

Makita M9204 Manual

Makita

Makita M9204 Manual de usuario

Craftsman

Craftsman 351.215131 Manual de usuario

Clarke

Clarke Woodworker CBS1-5B Manual de instrucciones

Chicago Pneumatic

Chicago Pneumatic CP9778 Manual de usuario

Nitto Kohki

Nitto Kohki BB-20 Manual de usuario

Ferm

Ferm FEOS-135 Manual de usuario

Unior

Unior 1510 Manual de usuario

stayer

stayer ls1200 Manual de usuario

Jet

Jet JSG-96 Manual de servicio

Parkside

Parkside PDS 290 B2 Manual de usuario

Status

Status XPA Series Manual de usuario

Clarke

Clarke EZ Sand Manual de usuario

Craftsman

Craftsman 113.22521 Manual de usuario

Craftsman

Craftsman 113.225831 Manual de usuario

CLAS

CLAS OP 1429 Manual de usuario