9
1. Remove the parts from the packaging
and assemble the device according to the
instructions in this manual.
2. Connect the power cable to the input terminal
in the base of the product. Then insert the
plug into the wall socket. The LED display will
light up and show ‘00’.
3. Press the LED display once, to turn the
product on. The fan springs into life and will
thereafter default to the most recent speed
setting.
4. Use the stainless steel exterior of the LED
display to switch between settings.
5. When a display icon is ashing, you can set
3.2 Instructions for using the LED display
and adjust this setting by pressing the LED
display. When the desired position is reached,
press the LED display again to conrm the
selection.
6. When setting the fan speed and timer
function, the LED display will continue to ash
until the desired setting is selected. After this,
press the LED display again to conrm the
selection.
7. Once the function is set, the icon will stop
blinking and will remain visible in the display,
for as long as this function is set to on.
8. Press the LED display for a few seconds to
switch o the appliance.
power
Fan
Timer
Swing
Comfort Quiet
Power
ventilation speed
down
ventilation speed up
Timer down Timer up
Horizontal oscillation Vertical oscillation
Natural wind Night mode
EN
