Duerkopp Adler 511 Manual de usuario

511

CNC-Automat für Riegel- und Kurznähte

CNC automat for bartacking seams

and short seams

Bedienanleitung / Operating Instructions

Aufstellanleitung / Installation Instructions

Serviceanleitung / Service Instructions

Postfach 17 03 51, D-33703 Bielefeld Potsdamer Straße 190, D-33719 Bielefeld

Telefon +49 (0) 5 21/ 9 25-00 Telefax+49(0)521/9252435www.duerkopp-adler.com

Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:

08/2009 Rev. index: 00.0 Printed in Federal Republic of Germany 0791 511001

Eigentum der Dürkopp Adler AG und urheberrechtlich geschützt. Jede, auch auszugsweise

Wiederverwendung dieser Inhalte ist ohne vorheriges schriftliches Einverständnis der Dürkopp Adler AG

verboten.

Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner,

even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.

Foreword

This instruction manual is intended to help the user to become familiar

with the machine and take advantage of its application possibilities in

accordance with the recommendations.

The instruction manual contains important information on how to

operate the machine securely, properly and economically. Observation

of the instructions eliminates danger, reduces costs for repair and

down-times, and increases the reliability and life of the machine.

The instruction manual is intended to complement existing national

accident prevention and environment protection regulations.

The instruction manual must always be available at the machine/sewing

unit.

The instruction manual must be read and applied by any person that is

authorized to work on the machine/sewing unit. This means:

–Operation, including equipping, troubleshooting during the work

cycle, removing of fabric waste,

–Service (maintenance, inspection, repair) and/or

–Transport.

The user also has to assure that only authorized personnel work on the

machine.

The user is obliged to check the machine at least once per shift for

apparent damages and to immediatly report any changes (including the

performance in service), which impair the safety.

The user company must ensure that the machine is only operated in

perfect working order.

Never remove or disable any safety devices.

If safety devices need to be removed for equipping, repairing or

maintaining, the safety devices must be remounted directly after

completion of the maintenance and repair work.

Unauthorized modification of the machine rules out liability of the

manufacturer for damage resulting from this.

Observe all safety and danger recommendations on the machine/unit!

The yellow-and-black striped surfaces designate permanend danger

areas, eg danger of squashing, cutting, shearing or collision.

Besides the recommendations in this instruction manual also observe

the general safety and accident prevention regulations!

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe all

the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot, needle

plate, feed dog and bobbin) when threading, when the workplace is

left, and during service work, the machine must be disconnected

from the mains by switching off the master switch or disconnecting

the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance unit.

Exceptions to this are only adjustments and functions checks made

by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time as

the entire sewing unit is found to comply with EC directives.

13. The line cord should be equipped with a country-specific mains

plug. This work must be carried out by appropriately trained

technicians (see paragraph 8).

It is absolutely necessary to respect the safety

instructions marked by these signs.

Danger of bodily injuries !

Please note also the general safety instructions.

Contents Page:

Preface and General Safety Instructions

Part 1: Operating Instructions for Class 511

(Edition 08/2009)

1. Product Description ........................................... 3

2. Proper and Intended Use ........................................ 4

3. Sub-classes ................................................. 5

4. Additional Equipment .......................................... 5

5. Frame ..................................................... 6

6. Technical Specifications......................................... 6

6.1 Sub-class-specifictechnicalparameters................................ 7

7. Operations

7.1 Threading the needle thread ....................................... 8

7.2 Adjusting the needle thread tension ................................... 9

7.3 Opening the needle thread tension ................................... 9

7.4 Adjusting the thread regulator ...................................... 10

7.5 Winding the bobbin thread ........................................ 11

7.6 Replacing the shuttle bobbin ....................................... 12

7.7 Adjusting the bobbin thread tension ................................... 13

7.8 Replacing the needle............................................ 14

8. Operating the 511 Controller

8.1 The control panel .............................................. 15

8.1.1 Thekeys................................................... 15

8.2 Userinterface................................................ 17

8.2.1 Structureofmenu.............................................. 17

8.3 Alternumericalvalues,parametervalues,selectionofalternatives................ 18

8.3.1 Alternumericalvalues........................................... 18

8.3.2 Selectionofaparameter.......................................... 19

8.3.3 Selectionofalternatives.......................................... 19

8.4 Seampattern ................................................ 20

8.5 Powersavingmode............................................. 20

Contents Page:

8.6 Mainmenu.................................................. 21

8.6.1 Seam pattern operation .......................................... 21

8.6.2 Programmingmode............................................. 26

8.6.3 Seam pattern sequences ......................................... 30

8.6.3.1 Switching the sequence programming mode on or off ........................ 30

8.6.3.2 Programming a sequence ......................................... 33

8.6.4 Technicianmode .............................................. 34

8.7 DistributorPCB............................................... 78

8.8 Error messages ............................................... 80

8.8.1 Error categories ............................................... 80

8.8.2 Application messages ........................................... 81

8.8.3 Machine faults (DACIII) .......................................... 83

9. Sewing .................................................... 87

10. Maintenance

10.1 Cleaning and checking ........................................... 88

10.2 Oillubrication................................................ 89

11. Standard Seam Patterns ......................................... 90

12. Clamping Feet ............................................... 97

1. Product Description

The Dürkopp Adler 511 is a CNC machine for bartacking seams and

short seams. The available standard bartacks are size-adjustable and

can additionally be saved in this modified shape.

Free seam contours can be programmed directly at the control panel

without any further devices.

Technical features

–DAC control unit with control panel.

The following functions are available:

–50 standard bartacks.

These bartacks can temporarily be modified in respect to

length, width and speed. When switching off the machine, the

modified values of the bartack last sewn are maintained.

–40 modified bartacks can also be saved.

–9 free seam contours with a total of 5000 available stitches

canalsobesaved.

So it is possible to attach small appliqués.

The coordinates are entered at the control panel. No further

devices are required.

–25 seam pattern sequence programs with up to 20 seam

patterns per seam pattern sequence program can be created

and saved.

–The coordinates are entered with a precision of 0.1 mm.

–If there is a rectangular contour of the fabric clamping feet, the

modification of bartacks is automatically checked in order to

avoid a collision of needle and fabric clamping feet.

–Counters are available for capacity and daily number of

pieces.

–Bartacks and seam pattern sequence programs and the

modification of special bartacks can be blocked.

–The speed can be changed from 0 rpm (manual operation with

full operability of the x-y drive) up to 2700 rpm in steps of 100

rpm.

–Fabric drive via two step motors.

–Drive of the automatic bartacker directly at the arm shaft via

brushless direct current motor.

–Maximum sewing field size 40 x 20 mm.

–Oil wick lubrication of arm shaft and driving shaft with two oil

reservoirs.

–Service and maintenance work is supported by a comprehensive

test programs.

2. Proper and Intended Use

The class 511 machine is a bartacking machine designed for sewing

light to medium-heavy material. Such material is generally made of

textile fibres, but it may also be leather. Such fabrics are used in the

clothing industry and for domestic and motor-vehicle upholstery.

Furthermore, this automatic bartacker can also sew “technical” seams.

In such a case, the operator must assess the possible dangers which

may arise (preferably in conjunction with DÜRKOPP ADLER AG). Such

applications are relatively unusual and also so varied that no single set

of criteria can cover them all. You may need to take appropriate safety

measures based on the outcome of this assessment.

Generally, only dry fabrics can be processed on this automatic

bartacker. The material may be no thicker than 10 mm when

compressed by the lowered sewing feet. The material should not

contain any hard objects. If hard objects are present, the machine must

be operated with protective eye wear. We currently do not provide such

eye protection.

In general the seam is produced with sewing threads made of textile

fibres (cotton threads, synthetic threads or core threads) with the

following dimensions:

Class 511-211/212 threads of the dimension 50/3 - 120/3

Class 511-213/214 threads of the dimension 30/3 - 120/3

If other threads are to be used, it is important to consider the possible

risks and to take corresponding safety measures.

This automatic bartacker must only be installed and operated in dry

and well-kept rooms. If it is operated in other spaces which are not dry

and well-kept, further measures may need to be agreed upon (see

EN 60204-31: 1999).

As manufacturers of industrial sewing machines, we proceed on the

assumption that personnel who work on our products will have

received training at least sufficient to acquaint them with all normal

operations and with any hazards which these may involve.

3. Sub-classes

Class 511-211 Automatic single-needle lockstitch bartacker with thread trimmer and

thread wiper.

Equipped with special sewing equipment for general bartacking

operations in outer garments.

With electro-magnetic sewing foot lift.

Class 511-212 Automatic single-needle lockstitch bartacker with thread trimmer and

thread wiper.

Equipped with a contraction clamp specially for bartacking

double-chainstitch buttonholes.

With electro-magnetic sewing foot lift.

Class 511-213 Automatic single-needle lockstitch bartacker with thread trimmer and

thread wiper.

Equipped with special sewing equipment for particularly thick fabrics.

Field of application:

General bartacking operations, e.g. bartacking of loops, pockets or fly

pieces in jeans or working clothes.

With electro-magnetic sewing foot lift.

Class 511-213 Automatic single-needle lockstitch bartacker with thread trimmer and

thread wiper.

Equipped with a special sewing equipment for particularly thick fabrics.

Field of application:

General bartacking operations, e.g. bartacking of loops, pockets or fly

pieces in jeans or working clothes.

With electro-magnetic sewing foot lift.

4. Additional Equipment

The following optional equipment is available for the automatic

bartacker 510:

Order no. Optional equipment

Refer to Parts List Special clamping foot set (optional/special manufacture, APC)

0510 59 015 4 Electric thread wiper (511-211, -213, -214)

0510 59 006 4 Pneumatic sewing foot lifting (511-211, -213, -214)

0510 59 012 4 Separate pneumatic sewing foot lift (pneum. control unit)

and sewing foot lift arm are on right and left (511-211, -212, -213, -214).

9780 00 010 8 Maintenance unit

0510 59 009 4 Conversion set for -211 to -213

0510 15 001 4 Large capacity hook; conversion kit for classes (511-211, -212, -213)

0510 59 004 4 Laser marking light (3 lights)

0510 59 003 4 Additional laser light

0510 59 005 4 Hand switch

9822 51 002 6 Sewing light

9822 51 002 7 Table clamp

9870 00 102 1 Cable assembly K (add-on kit socket for sewing light)

5. Frame

The following stand is available for the automatic bartacker 511:

MG55 40 029 4 Stand package

Table top size 600 x 1060 mm

Stand height 1160 to 1305 mm

MG53 40 148 4 Stand package (China)

Table top size 600 x 1060 mm

Stand height 1160 to 1305 mm

6. Technical Specifications

Noise level: Lc = 78dB (A)

Workplace-related emission value according to

DIN 45635-48-A-1-KL-2:

Bartack length: 15 mm

Stitch/bartack: 28

Throw width: 2.5 mm

Speed: 2700 min-1

Fabric: G1 DIN 23328 two-ply

Sewing cycle: 1.3 sec on and 1.0 sec off

Otros manuales para 511

Tabla de contenidos

Otros manuales de Máquina de coser de Duerkopp Adler

Duerkopp Adler

Duerkopp Adler 577-1111 Manual de usuario

Duerkopp Adler

Duerkopp Adler 739-1201 Guía

Duerkopp Adler

Duerkopp Adler 739-23 Guía

Duerkopp Adler

Duerkopp Adler 4180i-5 Guía

Duerkopp Adler

Duerkopp Adler 570 Guía

Duerkopp Adler

Duerkopp Adler 173 Manual de usuario

Duerkopp Adler

Duerkopp Adler 205-MO 2 Guía

Duerkopp Adler

Duerkopp Adler 52Xi Instrucciones de funcionamiento

Duerkopp Adler

Duerkopp Adler Z110 Guía

Duerkopp Adler

Duerkopp Adler 528-105 Guía

Duerkopp Adler

Duerkopp Adler 4181i-3 Guía de solución de problemas

Duerkopp Adler

Duerkopp Adler 195 Manual de usuario

Duerkopp Adler

Duerkopp Adler 510 Manual de usuario

Duerkopp Adler

Duerkopp Adler 195 Manual de usuario

Duerkopp Adler

Duerkopp Adler 744-122 Manual de usuario

Duerkopp Adler

Duerkopp Adler 267 Manual de usuario

Duerkopp Adler

Duerkopp Adler 609 Guía

Duerkopp Adler

Duerkopp Adler 1230i-6 Guía de solución de problemas

Duerkopp Adler

Duerkopp Adler 1180-5 Guía de solución de problemas

Duerkopp Adler

Duerkopp Adler 739 Manual

Duerkopp Adler

Duerkopp Adler 506-3 Manual de usuario

Duerkopp Adler

Duerkopp Adler 511 Instrucciones de funcionamiento

Duerkopp Adler

Duerkopp Adler 550-12-12 Instrucciones de funcionamiento

Duerkopp Adler

Duerkopp Adler 745-34 Guía

Manuales populares de Máquina de coser de otras marcas

Riccar

Riccar RL634DE Manual de usuario

Singer

Singer 2517 Manual de usuario

Pfaff

Pfaff 3307-1 SERIES Manual de usuario

Janome

Janome Quilt Maker Pro 18 VERSA Manual de usuario

Siruba

Siruba C007JP Manual de usuario

Husqvarna Viking

Husqvarna Viking Designer SE Manual de usuario

Singer

Singer 148-5 Manual de usuario

IKEA

IKEA SY Manual de usuario

Pfaff

Pfaff 571 Manual de usuario

Singer

Singer 15-91 Manual de usuario

Brother

Brother BB370 Manual de usuario

Pegasus

Pegasus WT100 Series Manual de usuario

Reliable

Reliable 7100DB Manual de usuario

Pfaff

Pfaff 937 Manual de usuario

Singer

Singer 6038 Manual de usuario

Singer

Singer 413K Manual de usuario

Pfaff

Pfaff 1471 E1 Manual de usuario

Kenmore

Kenmore 16677 - Serger Sewing Machine Manual de usuario