Duali DQ-MINI Manual de usuario
DQ-MINI
User Manual
Copyright ⓒ2016 DUALi Inc. All rights reserved. You are strictly prohibited to
copy, disclose, distribute, or use this document in part or as a whole for any
purposes other than those for which this document is disclosed. This document is
copyrighted and contains confidential information and other intellectual property
rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution
constitutes infringement of DUALi’s intellectual property rights.
DUALi Inc.
Document Version: 1.00
Last Revised Date: 20th. SEP 2018
Release Date: 25 November 2009
DQ-MINI User Manual, Version: 1.00
www.duali.com 2
Revision History
2018.09.20 (Ver. 1.00) : First Release
DQ-MINI User Manual, Version: 1.00
www.duali.com 3
DUALi Inc. reserves the right to make changes to its applications or services or to
discontinue any application or service at any time without notice. DUALi provides customer
assistance in various technical areas, but does not have full access to data concerning the
use and applications of customer's products.
Therefore, DUALi assumes no liability and is not responsible for customer applications or
software design or performance relating to systems or applications incorporating DUALi
products. In addition, DUALi assumes no liability and is not responsible for infringement of
patents and/or any other intellectual or industrial property rights of third parties, which may
result from assistance provided by DUALi.
Composition of the information in this manual has been done to the best of our knowledge.
DUALi does not guarantee the correctness and completeness of the details given in this
manual and may not be held liable for damages ensuing from incorrect or incomplete
information. Since, despite all our efforts, errors may not be completely avoided, we are
always grateful for your useful tips.
We have our development center in South Korea to provide technical support. For any
technical assistance can contact our technical support team as below;
Tel: +82 31 213 0074
FeliCa™ is registered trademark of SONY Corporation.
Mifare®is registered trademarks of NXP Semiconductors
DQ-MINI User Manual, Version: 1.00
www.duali.com 4
CONTENTS
01. Introduction...............................................................................................................5
02. Specification..............................................................................................................5
03. Contents Confirmation..............................................................................................6
04. Appearance & Installation.........................................................................................7
04.1 DQ MINI Feature & Dimension...............................................................................7
04.2 Mounting DQ Mini on the wall ...............................................................................7
05. Connection Diagram .................................................................................................9
06. Operation & Usage..................................................................................................10
07. Output Format .........................................................................................................10
08. Function configuration (Communication setting).................................................12
08.1 Wiegand option set (Parity, Reverse) .................................................................13
08.2 LED option setting ...............................................................................................14
08.3 Mifare KEY type, Block number, ID position, Wiegand format option set........14
08.4 QR Mode option set .............................................................................................16
08.5 QR Reading timeout.............................................................................................17
08.6 QR scan interval set.............................................................................................18
08.7 QR Maximum length set ......................................................................................19
08.8 QR data send channel set....................................................................................20
08.9 RF Scan option set...............................................................................................21
09. Certifications ...........................................................................................................22
10. Warranty & Service .................................................................................................23
DQ-MINI User Manual, Version: 1.00
www.duali.com 5
01. Introduction
DQ-MINI is a wiegand access control reader based on 13.56 Mhz contactless card
communication technology with stylish and rugged design. And it also can read QR code and
1D/2D barcode. The ideal combination of NFC & QR reader could upgrade your application into
another level. The reader is designed for wall mounting type of Access / Time attendance &
parking management systems, and etc.
02. Specification
Communication Interface
Wiegand - 32 / 34 /56/ 58/ 64/ 66 bit
RS-232 –115200bps
RS-485 –115200bps
Operating Frequency
13.56MHz
Credential Type
Contactless
> ISO 14443 TYPE A and B
> Mifare™
> FeliCa®
> ISO 15693
> ISO 18092 (NFC)
[Option]
Contact (SAM)
> ISO7816 Class A (5V)
2 SAM Card Slot
1D/2D QR
Recognizable spec
UPC/EAN, UPC/EAn with Supplementals, Bookland
EAN, ISSN, UCC Coupon Extended Code, Code128,
GS1-128, ISBT 128, Code 39, PDF417,
MicroPDF417, Composite Codes, Data Matrix,
Maxicode, Qr Code, micro QR, Aztec
Indicator
LED (RED /BLUE)
Magnetic Buzzer
Power Supply
12VDC (9- 12 VDC also available)
Linear supply recommended, 150 mA @ 12 VDC
Operating Condition
> -4ºto 158ºF (-20ºto 70ºC guaranteed)
> 5% to 90% relative humidity
Storage Condition
> -4ºto 158ºF (-20ºto 80ºC) >
> 5% to 90% relative humidity
Housing Material
PC (polycarbonate)
Dimensions
99.3(mm) x 91.9(mm) x 88.4(mm)
Weight
169.6g
Cable length
1000(mm)
Certifications
FCC Certification (US), CE(EU), IP65 compliant
DQ-MINI User Manual, Version: 1.00
www.duali.com 6
03. Contents Confirmation
< DQ Mini with Wiegand or USB cable > < Wall bracket > <Screw>
<Option>
PC Test/FW download zig
DQ-MINI User Manual, Version: 1.00
www.duali.com 7
04. Appearance & Installation
04.1 DQ MINI Feature & Dimension
04.2 Mounting DQ Mini on the wall
LED Indicator
<Bracket >
Place the provided wall mount bracket on
the wall and fix it tightly with screw
(Φ4mm Flat head)
Connect the power and communication
cable to DQ MINI’s terminal block.
In case you don’t use the cable as it is
shipped, you could cut off the end of
the cable and use only the wire that
you need for connection.
RF Field
1/2D barcode
detector
DQ-MINI User Manual, Version: 1.00
www.duali.com 8
< Side View>
Tilt the device slightly and insert to the wall mount from the top as above step. Fix it
tightly with 3*4 flat head machine screw.
※Caution
- Do not push the bracket too hard when fixing it to the wall.
- Screw has to be selected depending on the wall’s material and condition
- Place the reader to flat panel between the wall mount bracket and the wall.
It could cause a problem to assemble the device if the bracket is bent.
- Card reading distance can be short if the wall is made of steel or metal.
DQ-MINI User Manual, Version: 1.00
www.duali.com 9
05. Connection Diagram
PIN NAME
COLOR
PIN NUMBER
PWR_IN
RED
1
PWR_GND
BLACK
2
RS232_RX
GRAY
3
RS232_TX
PINK or JADE
4
WGD_D0
GREEN
5
WGD_D1
WHITE
6
PWR_GND
BLUE
7
LED
BROWN
8
BEEP
YELLOW
9
TAMPER
VIOLET
10
RS485+
ORANGE
11
RS485-
SKYBLUE
12
DQ-MINI User Manual, Version: 1.00
www.duali.com 10
06. Operation & Usage
Tamper (TAMP):
Reader makes alarm when its CASE is forced to open. It also makes TAMPER signal
to access controller. In case of closed CASE, TAMPER line (VIOLET) shows 0V and
otherwise (open) shows 5V.
LED Control:
Reader turns on RED LED when LED Signal (BROWN) with 0V. In case of 5V, BLUE
LED will be on.
Buzzer Control:
Reader makes beep sound when BEEP Signal (YELLOW) with 0V.
07. Output Format
[Data format]
-Data format can be decided by setting. (Refer to chapter 10)
-
Tabla de contenidos
Otros manuales de Lector de código de barras de Duali
