Duali DQ-CUBE Manual de usuario
DQ-CUBE
Installation Manual
Copyright ⓒ2018 DUALi Inc. All rights reserved. You are strictly prohibited to
copy, disclose, distribute, or use this document in part or as a whole for any
purposes other than those for which this document is disclosed. This document is
copyrighted and contains confidential information and other intellectual property
rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution
constitutes infringement of DUALi’s intellectual property rights.
DUALi Inc.
Document Version: 1.00
Last Revised Date: 22th. May 2019
Release Date: 25 November 2009
www.duali.com 2
DQ-CUBE Installation Manual Version: 1.00
Revision History
2019.05.22 (Ver. 1.00): First Release
www.duali.com 3
DQ-CUBE Installation Manual Version: 1.00
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any
application or service at any time without notice. DUALi provides customer assistance in various
technical areas, but does not have full access to data concerning the use and applications of
customer's products.
Therefore, DUALi assumes no liability and is not responsible for customer applications or software
design or performance relating to systems or applications incorporating DUALi products. In addition,
DUALi assumes no liability and is not responsible for infringement of patents and/or any other
intellectual or industrial property rights of third parties, which may result from assistance provided by
DUALi.
Composition of the information in this manual has been done to the best of our knowledge. DUALi
does not guarantee the correctness and completeness of the details given in this manual and may not
be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our
efforts, errors may not be completely avoided, we are always grateful for your useful tips.
We have our development center in South Korea to provide technical support. For any technical
assistance can contact our technical support team as below;
Tel: +82 31 213 0074
e-mail : sales@duali.com (Product inquiry)
e-mail : lab@duali.com (Technical support)
FeliCa™is registered trademark of SONY Corporation.
Mifare®is registered trademarks of NXP Semiconductors
www.duali.com 4
DQ-CUBE Installation Manual Version: 1.00
CONTENTS
1. Introduction.........................................................................................................................................................5
1.1 Specification..........................................................................................................................................5
2. Contents confirmation...................................................................................................................................6
2.1 Contents confirmation.....................................................................................................................6
3. Appearance.........................................................................................................................................................7
3.1 Product Exterior..................................................................................................................................7
3.2 Dimension...............................................................................................................................................8
3.3 Installation Guide................................................................................................................................8
3.4 How to add SAM............................................................................................................................... 10
4. Connection Diagram.................................................................................................................................... 12
4.1 12P cable (DC 12V ~ 24V INPUT)............................................................................................. 12
4.2 USB A TYPE (DC 5V USB Power)............................................................................................ 12
5. Environmental Feature............................................................................................................................... 13
5.1 Operation Environment................................................................................................................ 13
5.2 Storage Environment..................................................................................................................... 13
www.duali.com 5
DQ-CUBE Installation Manual Version: 1.00
1. Introduction
DQ Cube is designed for unattended machine, Kiosk & speed gate to accept mobile ID or E-wallet
application. It provides seamless scanning of digital 1D, 2D and PDF codes in a single, convenient
device.
1.1 Specification
ITEM
SPECIFICATION
NOTE
Dimension (L*W*H)
76.2*71*47
Input Power
USB Power: 4.75V ~ 5.25V (Typ. USB Power)
12pin cable: 9V ~ 24V(Typ. 12V)
Power Consumption
300~350mA
he actual current drawn will
depend upon installation
environment
CPU
Cortex-M4, 1MB Flash, 192KB SRAM
External 32Mb Serial Flash
(Option)
Communication
Interface
Wiegand –Standard 32 / 34 / 64/ 66 bit
RS-232 –default 115,200bps
RS-485 –default 115,200bps
USB Device –STM32 Integrated USB(Option)
Credential Type
Contact (Standard SIM socket 1EA)
-ISO7816 Class A, B, C
Contactless (PN5180, NXP): NFC Full support
-ISO-14443 TYPE-A
-ISO-14443 TYPE-B
-Mifare®
-Felica™
-ISO-15693
-ISO-18092
Additional Function
Magnetic Buzzer: 1EA (Max 93dB)
Input I/O: 2EA (Isolated)
Certification
KC certified (R-C-DUI-DQ-Cube)
CE certified (Declaration of Conformity)
www.duali.com 6
DQ-CUBE Installation Manual Version: 1.00
2. Contents confirmation
2.1 Contents confirmation
-DQ-CUBE hardware
-Cable option ( by request ) -> refer to page 10
1) 12P cable (Wiegand/RS232/RS485) OR
2) USB cable (USB HID or Virtual Comport)
www.duali.com 7
DQ-CUBE Installation Manual Version: 1.00
3. Appearance
3.1 Product Exterior
www.duali.com 8
DQ-CUBE Installation Manual Version: 1.00
3.2 Dimension
3.3 Installation Guide
-You’ll need following item
DQ-CUBE * 1EA
M3 Tapping screws * 4EA
Fixing panel for DQ-CUBE (recommendable depth 1.5mm min.)
1) Prepare tapping screws fits for DQ Cube.
Fix DQ Cube from inside Kiosk or pannel as below using tapping screws
Boss for tapping screw
4 point
Recommended depth
www.duali.com 9
DQ-CUBE Installation Manual Version: 1.00
After fix Cube on panel
www.duali.com 10
DQ-CUBE Installation Manual Version: 1.00
3.4 How to insert SAM
-You will need
SAM card
Screw driver (+) (-) flat head screw driver.
Note: SAM requires only for the secure transaction, it’s not necessary in case of QR
only version. We recommended to provide SAM in case of mass production to prevent
break/scratch of its housing due to customers installation.
1) Unscrew below marked screws. (4 point).
2) Use flat head driver to open cover as below.
3) Unscrew 4 point’s screw to detach QR module.
Otros manuales para DQ-CUBE
1
Tabla de contenidos
Otros manuales de Lector de código de barras de Duali
