DSM 96M4371o Manual de usuario
96M4371o
Single Board Computer
User's Manual
Version 1.1
Copyright © DSM Computer GmbH, 2011. All rights reserved.
All other brand names are registered trademarks of their respective owners.
Preface
96M4371o User’s Manual 1-1
Table of Contents
How to Use This Manual
Chapter 1 System Overview.......................................................................................................1-1
1.1 Introduction ....................................................................................................... 1-1
1.2 Check List........................................................................................................... 1-2
1.3 Product Specification........................................................................................ 1-3
1.3.1 Mechanical Drawing................................................................................ 1-6
1.4 System Architecture.......................................................................................... 1-8
Chapter 2 Hardware Configuration...........................................................................................2-1
2.1 Jumper Setting................................................................................................... 2-1
2.2 Connector Allocation........................................................................................ 2-2
Chapter 3 System Installation....................................................................................................3-1
3.1 Intel® i7/i5/P4500 PGA .................................................................................. 3-1
3.2 Main Memory .................................................................................................... 3-1
3.3 Installing the Single Board Computer............................................................ 3-2
3.3.1 Chipset Component Driver .................................................................... 3-2
3.3.2 Intel® Integrated HD Graphics Controller........................................... 3-2
3.3.3 Intel Gigabit Ethernet Controller ........................................................... 3-3
3.3.4 Audio Controller...................................................................................... 3-3
3.4 Clear CMOS Operation .................................................................................... 3-3
3.5 WDT Function ................................................................................................... 3-3
3.6 GPIO.................................................................................................................. 3-10
3.6.1 Pin assignment ....................................................................................... 3-10
3.6.2 96M4371o GPIO Programming Guide ............................................... 3-10
3.6.3 Example................................................................................................... 3-11
Chapter 4 BIOS Setup Information............................................................................................4-1
4.1 Entering Setup -- Launch System Setup ........................................................ 4-1
4.2 Main .................................................................................................................... 4-2
4.3 Advanced ........................................................................................................... 4-3
4.4 Chipset.............................................................................................................. 4-28
4.5 Boot ................................................................................................................... 4-35
4.6 Security ............................................................................................................. 4-38
4.7 Save & Exit ....................................................................................................... 4-39
Chapter 5 Troubleshooting........................................................................................................5-1
5.1 Hardware Quick Installation........................................................................... 5-1
5.2 BIOS Setting ....................................................................................................... 5-2
5.3 FAQ ..................................................................................................................... 5-4
Appendix A
Appendix B
Preface
96M4371o User’s Manual 1-2
How to Use This Manual
The manual describes how to configure your 96M4371o system to meet
various operating requirements. It is divided into five chapters, with each chapter
addressing a basic concept and operation of Single Board Computer.
Chapter 1 : System Overview. Presents what you have in the box and give you an
overview of the product specifications and basic system architecture for this model of
single board computer.
Chapter 2 : Hardware Configuration. Shows the definitions and locations of Jumpers
and Connectors that you can easily configure your system.
Chapter 3 : System Installation. Describes how to properly mount the CPU, main
memory and M-systems flash disk to get a safe installation and provides a
programming guide of Watch Dog Timer function.
Chapter 4 : BIOS Setup Information. Specifies the meaning of each setup
parameters, how to get advanced BIOS performance and update new BIOS. In
addition, POST checkpoint list will give users some guidelines of trouble-shooting.
Chapter 5 : Troubleshooting. Provides you a few useful tips to quickly get your
96M4371o running with no failure. As basic hardware installation has been
addressed in Chapter 3, this chapter will basically focus on system integration issues,
in terms of backplane setup, BIOS setting, and OS diagnostics.
The content of this manual and EC declaration document is subject to change without
prior notice. These changes will be incorporated in new editions of the document.
DSM may make supplement or change in the products described in this document at
any time.
Updates to this manual, technical clarification, and answers to frequently asked
questions will be shown on the following web site : http://www.dsm-computer.com.
System Overview
96M4371o User’s Manual 1-1
Chapter 1
System Overview
1.1 Introduction
96M4371o, the PICMG 1.3 SHB (Single Host Board) combined with either
the Intel® Core i7-620M/i5-520M/P4500 processor. The attractive Core i processor
does not only posses amazing parallel computing power but also generates only 35W
TDP (Thermal Design Power). That makes the system more powerful and reliable
with smaller and quieter cooling fan.
The SHB adopted Intel® QM57 chipset. The QM57 embedded Graphics Media
Accelerator HD is the latest generation Intel integrated graphics controller that can
supports 3D multimedia capabilities including Microsoft DirectX 10, Shader Model
4.0, MPEG-2 and OpenGL 2.1. More than that, user could utilize even higher-end, the
latest PCI Express x16 interface graphics card via backplane. Based on the
low-power/high-performance Nehalem micro-architecture, the processor is designed
for a two-chip platform, as opposed to the traditional three chip platforms (processor,
GMCH, and ICH).
96M4371o built with dual Intel® Gigabit Ethernet. Two DDR3 DIMM
sockets support system memory up to 8GB. Six SATA 300 ports (dual ports via
backplane) support RAID 0, 1, 5, 10.
To meet bandwidth of storage and expansion cards requirement, the
96M4371o was designed flexible with five PCI Express lanes via backplane.
Those PCI Express lanes could be one PCI Express x16(or two PCI Express x8 links)
from CPU and four PCI Express x1 links(or one PCI Express x4 link) from PCH. Four
PCI Express x1 links configuration can support more PCI Express x1 devices via
backplane and one PCI Express x4 link configuration can support RAID card or
special add-on cards such as image processing board. In addition, the flexible
configuration can be leveraged with bridge on backplane to support more PCI or
PCI-X slots that benefits industries with legacy support.
Advanced Management Technology (AMT) 6.0 is feature that 96M4371o
equipped. This technology provides remote access capability via Intel® Gigabit
Ethernet controller. The new technology is a hardware-based solution that uses
out-of-band communication for system management access to client systems. Beside
that, the hardware and software information can be gathering by 3rdparty software
then storage in SPI interface EEPROM. Therefore, asset management could be done
at the same time. 96M4371o also supports iTPM (Intel Trusted Platform Mod-
ule) function for applications.
System Overview
96M4371o User’s Manual 1-2
96M4371o features:
zSupport Intel i7-620M/i5-520M/P4500 processors in rPGA988 package
zDelivers up to 8GB maximum DDR3 1066/800 on two DIMM sockets
zSupport dual display by DVI-I port on bracket
zSupport iAMT 6.0 and external TPM via TPM module
zHigh speed dual Gigabit Ethernet based on PCI Express x1, high bandwidth I/
O interface
zRich I/O connections such as FDD, two Gigabit Ethernet, serial ports, paral-
lel port, USB 2.0
zFour on-board SATA ports support RAID 0,1,5,10
The PICMG 1.3 SHB is the best solution of applications such like flight simulation,
image processing, broadcasting and so on that need performance of display and
storage.
1.2 Check List
The 96M4371o package should cover the following basic items:
zOne 96M4371o single host board
zOne dual Serial ports cable kit
zOne single Parallel port cable kit
zOne FDD cable
zTwo 7-pin SATA signal cables
zOne DVI-I cable
zOne Installation Resources CD-Title
Optional: One bracket with PS/2 keyboard and mouse
If any of these items is damaged or missing, please contact your vendor and keep all
packing materials for future replacement and maintenance.
System Overview
96M4371o User’s Manual 1-3
1.3 Product Specification
zMain processor
- Intel® Core i7-620M/i5-520M/P4500 Processor
zBIOS
AMI system BIOS with SPI Serial CMOS EEPROM with easy upgrade function ACPI,
DMI, Green function and Plug and Play Compatible
zMain Memory
- Support dual-channel DDR3 memory interface
- Non-ECC, non-buffered DIMMs only
- Two DIMM sockets support 1066/800 DDR3-SDRAM up to 8GB System Memory
zL2 Cache Memory
Built-in Processor
zChipset
Intel® QM57 chipset
zBus Interface
- Follow PICMG 1.3 Rev 1.0 standard (PCI Express and PCI)
- Support four PCI Express x1 (can be aggregated as one PCI Express x4) through
backplane
- Support one PCI Express x16(can be separated as two PCI Express x8) through
backplane
- Support four PCI devices through backplane
zSATA
- Four SATA 300 ports on-board and dual SATA 300 ports via backplane
- Support Intel® Matrix Storage Technology based on Intel® QM57
zFloppy Drive Interface
Support one FDD port up to two floppy drives and 5-1/4"(360K, 1.2MB), 3-1/2"
(720K, 1.2MB, 1.44MB, 2.88MB) diskette format and 3-mode FDD
zSerial Ports
Support two high-speed 16C550 compatible UARTs with 16-byte T/R FIFOs
zParallel Port
Support one parallel port with SPP, EPP and ECP modes
System Overview
96M4371o User’s Manual 1-4
zUSB Interface
Support twelve USB (Universal Serial Bus) ports (two USB ports on bracket that
dedicated to keyboard & mouse; six USB ports on-board and four USB ports via
backplane) for high-speed I/O peripheral devices
zPS/2 Mouse and Keyboard Interface
Support one 10-pin header for external PS/2 keyboard/mouse connection
zAuxiliary I/O Interfaces
System reset switch, external speaker, Keyboard lock and HDD active LED, etc
zReal Time Clock/Calendar (RTC)
Support Y2K Real Time Clock/Calendar with battery backup for 7-year data
retention
zWatchdog Timer
- Support WDT function through software programming for enable/disable and
interval setting
- Generate system reset
zOn-board VGA
GMCH integrated graphics, 400MHz core frequency; share system memory up to
1GB for system with greater than or equal to 192MB of system memory
zOn-board Ethernet LAN
Dual Intel® PCI Express x1 interface based Gigabit Ethernet to support RJ-45
connector
zHigh Driving GPIO
Support 8 programmable high driving GPIO
zCooling Fans
Support one 4-pin power connector for CPU fan and one 3-pin power connector for
system fan
zSystem Monitoring Feature
Monitor CPU temperature, system temperature and major power sources, etc.
zBracket
Support dual Ethernet port with 2 indicators, dual USB ports and one DVI port
zOutline Dimension (L X W):
338.5mm (13.33”) X 126.39mm (4.98”)
System Overview
96M4371o User’s Manual 1-5
zPower Requirements:
- +12V (CPU)@ 1.37A
- +12V (System)@ 0.31A
- +5V @ 3.58A
- Test Programs: BurnIn Test V5.3
- Run Time: Full loading
z- Test configuration:
System Configuration
CPU Type Intel® Core™ i7 CPU M620 @2.67GHz L3:4MB Bus Speed:133
SBC BIOS 96M4371o BIOS Rev.: R1.00.E0 (07142010)
Memory DDR3 1066 1GB (ELPIDA J1108BABG-DJ-E)
VGA Card Onboard Intel® QM57
VGA Driver Intel® Graphics Media Accelerator HD Version 6.14.10.5189
LAN Card #1 Onboard Intel® 82577LM Gigabit Network Connection
LAN Driver Intel® 82577LM Gigabit Network Connection Version 11.5.10.0
LAN Card #2 Onboard Intel® 82583V Gigabit Network Connection
LAN Driver Intel® 82583V Gigabit Network Connection Version 11.4.7.0
Audio Card Onboard Realtek ALC662 Audio
Audio Driver Realtek High Definition Audio Version 5.10.0.5043
Chip Driver Intel® Chipset Device Software Version 9.1.1.1025
SATA HDD Seagate ST3808110AS 80GB
CDROM LITE-ON LH-20A1S DVD-ROM
Power Supply Sunpower SPX-6500P1 500W
Back plane 13 slot
zOperating Temperature:
0°C ~ 60°C (23°F ~ 140°F)
zStorage Temperature:
-20°C ~ 80°C
zRelative Humidity:
5% ~ 90%, non-condensing
System Overview
96M4371o User’s Manual 1-6
1.3.1 Mechanical Drawing
System Overview
96M4371o User’s Manual 1-7
Tabla de contenidos
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
