DSC Power 832 PC5010 Manual de usuario

Code Changes

Access Codes

Access codes are used to arm and disarm the system. There are 32 access codes available: 1 master code, 32

regular access codes, 2 duress codes and 2 partition master codes. Ask your installer for more information on

using the duress and partition master codes.

Only the Master Code can be used to program additional security codes and to change other system fea-

tures as well as to arm and disarm the security system. The Master Code will be supplied to you by your

installer. All keypad entries are made by pressing one key at a time.

NOTE: An access code can be a four or six digit number depending on how your installer has programmed

your system. Ask your installer for more information regarding access codes.

Programming Security Codes

Programming codes from an LED or LCD5501Z Keypad:

The Master Code

To program the Master Code, enter [*][5][current Master Code][40][new Master Code]. The Master Code must

be four digits unless otherwise indicated by your installer. Enter digits 0 through 9 only.

Press [#] 3 times to return to the Ready state.

Be sure to record your new Master Code on the “System Information” page in this booklet.

NOTE: We recommend that the factory default Master Code [1234] not be used.

Additional Codes

Up to 36 additional codes may be programmed. Codes 01-32 are regular access codes. Codes 33 and 34 are

duress codes. Codes 41 and 42 are the partition 1 and partition 2 master codes, respectively.

To program a new code:

Enter [*][5][Master code][code number][new access code]. The code number is a double-digit number from

01-34 or 41-42.

Access codes must be four digits long. Enter digits 0 through 9 only.

To exit code programming, press [#] 3 times.

If an access code already exists for the code number you have selected, it will be replaced by the new code.

To erase a code:

Enter [*][5][Master code][code number][*]. To exit code programming, press [#] 3 times.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de seguridad de DSC

DSC

DSC PC5010 V2.0 Manual de usuario

DSC

DSC Power608 Manual de usuario

DSC

DSC PC1555MX Manual de usuario

DSC

DSC PDigital Security PC1565 Manual de usuario

DSC

DSC PC1500 Manual de usuario

DSC

DSC Power632 PC1555 Manual de usuario

DSC

DSC IMPASSA Manual de usuario

DSC

DSC Power632 Manual de usuario

DSC

DSC PowerSeries Neo Manual de usuario

DSC

DSC Impassa PT4 Manual de usuario

DSC

DSC POWER 608 Manual de usuario

DSC

DSC Voice Assisted Security Control Escort 4580 Manual de usuario

DSC

DSC WS900 Manual de usuario

DSC

DSC Maxsys PC6010 Manual de usuario

DSC

DSC neo HS2016 Manual de usuario

DSC

DSC Power832 Manual de usuario

DSC

DSC PowerSeries Manual de usuario

DSC

DSC neo HS2016 Manual de usuario

DSC

DSC Envoy NT9005EU Instrucciones de funcionamiento

DSC

DSC Power Series Manual de usuario

DSC

DSC iOtega Manual de usuario

DSC

DSC tyco WP8360 Manual de usuario

DSC

DSC PC1000 Manual de usuario

DSC

DSC PC1555 - 2 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario