DSC IMPASSA Manual de instrucciones

panels, keypads & modules

Contact your DSC distributor.

www.dsc.com | 1-888-888-7838

IMPASSA

Self-Contained 2-Way Wireless Security System

Quick-Start Installation Guide

1. Remove the Front Plate

Using a small screwdriver, insert in the bottom left and right-hand slots and

gently pry to separate the front panel.

2. Mount the Back Cover

Begin by routing telephone line wiring, Input/Output wiring and AC power

wiring through the cutout in the back cover. Determine placement location

and mount the back cover to the wall using the screws and drywall plugs.

Note: For versions supporting cellular communications, the cellular signal

strength can be ﬁrst checked in section [850], to determine the optimal

location to mount the unit.

3. Connect Wiring

Connect wiring to the terminal block on the back cover.

4. Connect the Battery

Connect the battery cable to the connector on the PCB, ensuring proper

orientation of the connector.

5. Attach the Front Cover

Place the top portion into the back cover ﬁrst and press the bottom portion

into the back cover to snap into place.

Artwork PN 30001315 / Manufacturing PN 29008215R001

6. Power Up the System

Apply power by plugging in the transformer.

8. Template Programming

The functions required for basic operation of the IMPASSA system can be

conﬁgured (4-digit code) quickly through the use of template programming in

section [899]. Code prompts exist for pre-deﬁned zone deﬁnitions, reporting

code formats, communication call directions and DLS setup. Once the code

has been programmed, you will be prompted to enter the monitoring station

telephone number and account code, DLS access code, entry and exit

delays, and the installer code.

7. Enrol Wireless Devices

Using the quick enrol feature found in section [898], wireless devices can be

enrolled into the IMPASSA system easily.

9. Perform Placement Testing

The proposed placement of each wireless device should be tested before it is

mounted by entering section [904]-[907]. Testing the signal strength between

IMPASSA and the wireless devices can be accomplished in a group (global

placement test) or individuals.

10. Cellular Conﬁguration

a. Prior to system installation, ensure the SIM card has been activated

with Connect24 (C24 Communications)

b. Conﬁgure the communications phone numbers in section [301]-[303]

and [305] to the desired conﬁguration

c. Conﬁrm the cellular communicator module by programming panel

section [382] option [5] as ON

d. Conﬁrm panel section [401] option [1] as ON in order to perform

DLS sessions through cellular

panels, keypads & modules For product information

www.dsc.com

Product speciﬁcations and availability subject to change without

notice. Certain product names mentioned herein may be trade

names and/or registered trademarks of other companies.

©2011 2011-08

Otros manuales para IMPASSA

2

Tabla de contenidos

Otros manuales de Sistema de seguridad de DSC

DSC

DSC PC 2500 Manual de usuario

DSC

DSC PowerSeries RFK5500 Manual de usuario

DSC

DSC PC3000 Manual de usuario

DSC

DSC tyco WP8360 Manual de usuario

DSC

DSC PowerSeries PC1864 Manual de usuario

DSC

DSC PC5132-433 Manual de usuario

DSC

DSC PC2550 Manual de usuario

DSC

DSC Power Series Manual de usuario

DSC

DSC PC1000 Manual de usuario

DSC

DSC SEA-B-QUE Manual de usuario

DSC

DSC Maxsys PC6010 Manual de usuario

DSC

DSC PDigital Security PC1565 Manual de usuario

DSC

DSC Neo Power HS2016 Manual de usuario

DSC

DSC PowerSeries PC1404 Manual de usuario

DSC

DSC PC1500 Manual de usuario

DSC

DSC PowerSeries Manual de usuario

DSC

DSC pg9901 Manual de usuario

DSC

DSC New Classic PC585 Manual de usuario

DSC

DSC PC2550 Manual de usuario

DSC

DSC Digital Security Control PC158O Manual de usuario

DSC

DSC Power 832 PC5921 Manual de usuario

DSC

DSC Power632 Manual de usuario

DSC

DSC Power832 Guía de solución de problemas

DSC

DSC IMPASSA Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario