Dragon Touch OD10 Manual de usuario
USER MANUAL
Dragon Touch Outdoor PTZ Security Camera OD10
WHAT'S IN THE BOX
Dragon Touch
Outdoor PTZ
Security Camera
OD10 * 1
Camera Power Adapter * 1 Power Extended Cable * 1
Mounting Screws * 4 Expansion Bolt * 4
Waterproof Rubber
Ring for RJ45 Port * 1
Waterproof Main Part for
RJ45 Port * 1
Waterproof Rubber Plug
for RJ45 Port * 1 Quick Start Guide * 1
DragonTouch Outdoor PTZ Security Camera OD10
CAMERA INTRODUCTION
10
DC Power Port
LED Lights
RJ45 Port
Reset Button
Antenna
Lens
IR Lights
1
2
Microphone
3
4
5
6
7
8
Light Sensor
9
Speaker
10
MicroSD Card Slot
11
11
1
2
3
4
5
8
6
6
7
9
8
1 2
3 4
SET-UP
1. Install Smart Life App
Search for "Smart Life" app in App Store / Google play, or scan the QR code below to
download.
② Fill in email address, a verification code will be sent, please get it and fill it in.
Download the app from App Store Download the App from Google Play
2. Get a New Account
If you already have an account for Smart Life, please log in your account and skip to
step 4.
①Open “Smart Life” app to click “Register → Agree”. Choose country / region, fill in the
email address.
Enter Verification Code
United States of America
Email
③Then set password, click “Done”.
Set Password
Done
④After registering the account, you need to add home information, click “(at the left
bottom)”, enter the "Home Management", click "Add Home" and fill in Home name,
location, add rooms, then click “Save” to add successfully.
Download on the
App Store
GET IT ON
Google Play
Note:
• Email address should be valid.
• The length of password must be within 6-20 characters, no special characters included.
• Please choose the same country in register and login.
• If you forgot the password, click “Forget Password” to reset it.
3. Add Your Camera
A. Configure through Wi-Fi (Recommended)
① Power on the Camera
If you want to plug in the microSD Card, please do it before installing camera on the wall.
Plug the power adapter into the outlet. The camera will rotate to complete self-test.
After that, you will hear the sound "wait for Wi-Fi config".
Note: If you don't hear any sound, please reset it on again.
② Choose Room, click “Add Device → Video Surveillance → Smart Camera → next step
→ Enter Wi-Fi Password → Confirm → Continue”.
5 6
③ A QR code will be shown, just face the phone to the camera, after you hear the
sound “connect the router”,then click “I heard a Prompt”, see below picture.
④Wait for the connection for about 30s, the device will be added successfully. Name
your camera and click the room where it is, click “Done”.
⑤Click camera icon to preview camera live video.
⑥Please install the camera on the wall or ceiling and adjust the antenna to make sure the
Wi-Fi signal strength more than 60%.
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
7 8
B. Configure through LAN Cable
Note: If you want to configure through LAN, please make sure there is LAN Cable on the
wall or ceiling where you want to install. If yes, please add your camera as following steps.
①Power on the Camera
If you want to insert microSD Card, please do it before installing camera on the wall.
Plug the LAN Cable into the RJ45 port and plug the power adapter into the outlet.
The camera will rotate to complete self-test. After that, you will hear the sound "Wait for
Wi-Fi config".
②Click “Add Device → Video Surveillance → Smart Camera → Net Paring Mode
Cable → next step → Bind → Done”.
9 10
③Click camera icon to preview camera live video.
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
4. Installation
① Insert microSD card
If you want to insert microSD card, please do it firstly. If not, please skip this step. Open the
cover and install the microSD card, then close the cover.
Step1: Open the cover.
Step2: Install microSD card.
Step3: Close the cover.
11 12
②Place the camera in a fixed position first and mark the screw hole with a marker. Use a
tool to drill holes in the marked screw holes.
③ After screwing four holes, insert the expansion bolt into the screw hole.
④Align the screw hole on the bottom of the camera bracket with the hole on the wall.
Screw to fix the camera with the screws.
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
Setting & Management
PTZ Control (The camera can be arbitrarily rotated to give you a different perspective.
You can move it up and down, capture any corner you want to view.)
Wi-Fi Signal Strength
Sound Switch
SD/HD Playback of Video
Record Video
1
2
Full Screen
3
4
5
8
9
10
Motion detection alarm (Abnormal report notification through intelligent detection of
anomaly in home. You can go out to work and play confidently. To set the alarm level
according to the camera's filed of view can make the alarm more accurate. Also you
set alarm timer as you want.)
11
Photo Album: You could view the Screenshot and recording videos.
12
Multi-View, if you have installed several Dragon Touch Cameras, you could click
multi-view to select the cameras which you want to show on the same screen.
13
Cloud storage, you need to purchase the cloud storage if you want.
14
1
2
5
3
4
678
910 11
IPC
Multi-View
Cloud storagePhoto album
HD
2020-02-07 13:51:48
Direction
AlarmPlayback
Signal: 91%
12 13 14
Real-time preview interface
Voice Chat
Screenshot
6
7
FUNCTION DESCRIPTION
13 14
SETTING & MANAGEMENT
Click " " in the upper right corner of the control page for the management and setting
of the device.
USE THIRD PARTY DEVICES TO CONTROL
Choose the camera you want to control, click ” ” on the top right corner to enter into
the more settings.
Device Name - Can modify the device name and device location.
Device Information - To view: Owner, Virtual ID, Wi-Fi signal strength, IP address,
Device time zone.
Third Party Supported - Click the icon to view its instruction.
Basic Function Settings - Information such as time watermark flip screen.
IR Night Vision - Select IR night vision auto/on/off.
Detection Alarm Settings - a. can set the motion detection alarm on/off and motion
detection alarm sensitivity.
b. You could set motion tracking on/off and Alarm schedule
Storage settings - Please make sure you insert the microSD card. You could set the
recording mode Non-Stop(7*24h) or Event Recording.
Value-added Service Purchase - Video cloud storage service (optional)
Offline Notification - You could set on/off to notice you once the device offline.
Share Device - Can share this device to other people, enter the people's mobile phone
number; (Note: the entered mobile phone number should be registered with a smart life
App account).
FAQ & Feedback - Here you could found the questions and answers, if not in, you could
contact us through the bottom button. We will reply you in 24 hours.
Firmware Information - Support OTA Remote Upgrade (Do not disconnect during upgrading).
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
15 16
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de Dragon Touch
