2. Press the button and the default mode will be "Refresh", press it
again or twice, and mode will switch to "Relax “or "Relieve". There are
different kneading modes for choosing as per your preferences.
3. Press the button and the default mode will be "Refresh", press it
again or twice, and mode will switch to "Relax “or "Relieve'. There are
different kneading modes for choosing as per your preferences.
4. Press the heat button to start heating function.
5. Press the button again to stop the kneading massage.
1026
6 7
Note :
Automatic period of any function is 15 minutes. For start using it again
you will need to change function.
PRECAUTIONS FOR GOOD CARE OF MASSAGER
Power Plug and Cord
·Inspect the cord & plug carefully.
·Look for cracks or damaged insulation, missing plug blades and
indications of overheating or burning especially on the plug.
·Make sure the plug is securely aached to cable.
·The plug should be molded to the cord or have a clamping mechanism
that fits snugly around the cord without pinching.
·Check for hot or discolored outlet wall plates. That may indicate
dangerous heat buildup at the connections.
·Never force a plug into an outlet if it doesn't fit well.
·Do not disconnect the AC plug from the electrical outlet roughly.
·DO not connect or disconnect the AC plug from the electrical outlet
with wet hands.
·When disconnecting from power outlet, grasp the plug, not the cord.
·Do not place the AC cord under the massager body or any other heavy
object.
·Do not wind the AC cord around the massager as it may damage the
cord and result in fire or electrical shock.
·Do not operate the massager with a damaged cord or tamper with the
cord, contact the service center for inspection.
·Please use only recommended adapter and aachment.
·Do not use the massager if the electrical outlet is excessively loose.
Product Care and Storage
·Be sure to remove the AC plug from the electrical outlet before cleaning
the massager.
·Do not use benzene, thinner or any other abrasive solvent to clean your
massager.
·Only use a dry cloth when cleaning the massager.
·Never use a damp cloth to clean the massager or the power switches.
·When necessary, detach the fabric covers for cleaning to maintain good
hygiene.
·When massager is not in use for a long period of time, it is advisable that
the AC power cord of the massager be coiled, and the massager stored
in a dust and moisture free environment.
·Do not store the massager near intense heat or an open flame.
·Do not leave the massager under direct sunlight for long period of time.
