Sensor Type WT
for use with the DOMA unit to determine surface temperatures
(e.g. on walls)
meauring range: -20,0 bis 70,0°C
measuring range for material moisture measurement:
for wood: 0,0 - 50,0 % H O
2
for building materials: 0,0 - 20,0 % H O
2
non-destructive - done in seconds - just lay it on the
material and read off the answer -
measuring depth approx. 3 cm
- memory for 50 measurements with automatic determination
of median, maximum and minimum value
- 2 sensors can be connected
- automatic dew point calculation
- simultaneous display of air temperature, relative humidity,
dew point and surface temperature
- material group setting by means of a membrane-type
keypad
Air Sensor Type LFLT
for use with the DOMA unit to determine relative humidity air
temperature and dew point
measuring range: -20 bis 70 °C
10 bis 95 %rF
Moisture Meter Type A10/20 for all Kinds of
Construction Materials
analog, hand-held, with capacitive measuring principle
measuring range: 0 - 20% H O
2
non-destructive - done in seconds - just lay it on the
material and read off the answer -
measuring depth approx. 3 cm
- material group setting by means of a rotary knob
- very large display scale
- especially good detection of differences in moisture levels.
- Threshold level for audible alarm, to indicate excessively
high moisture levels, can be set
Universal Meter Type DOMA for Determination of
Material Moisture in Wood and Building Materials,
Air Humidity, Air Temperature, Dew Point and
Surface Temperature.
OTHER INSTRUMENTS OUT OF OUR PRODUCT RANGE:
