Doro Magna 2000 Manual de usuario
English
Doro Magna 2000
1
2
3
5
4
6
8
911
12 20
21
19
14
13
15
10
18
16 17
7
1. Ringer LED
2. Earpiece
3. Extra amplification
(boost)
4. Up/Call log
5. Left menu key/OK
6. Call key
7. */Keypad lock
8. Speakerphone on/off
9. Microphone
10. Phonebook
11. Recall key
12. #/Ring tone on/off
13. Down/Redial
14. End call
15. Right menu key/Back/In-
ternal call
16. Speakerphone
17. Speakerphone volume
18. Paging
19. Speed dial keys
20. Charging contacts
21. Ringer LED
English
Contents
Congratulations on your purchase ............................................. 1
Installation................................................................................... 1
Connection........................................................................... 1
Basic setup .......................................................................... 2
Operation ..................................................................................... 2
Calls...................................................................................... 2
Sound................................................................................... 4
Handle the phone................................................................ 6
Phonebook........................................................................... 6
Call list (Caller ID)................................................................ 8
Settings......................................................................................10
Handset settings (HS SETTINGS) .....................................10
Base unit settings (BS SETTINGS)....................................11
Reset to default.................................................................12
Expanded system (two or more handsets) ......................12
Other ..........................................................................................14
Battery................................................................................14
Range.................................................................................14
Eco functionality................................................................15
Troubleshooting.................................................................15
Care and Maintenance .....................................................16
Warranty.............................................................................16
Declaration of Conformity................................................. 17
Specifications .................................................................... 17
English
1
Congratulations on your purchase
Doro Magna 2000 combines an exceptionally loud receiver,
ringer and speakerphone with a stylish design. The speaker-
phone base allows you to answer calls and dial your three fa-
vourite numbers without having to retrieve the handset,
perfect for hands free conversations. Additional features in-
clude flashing ringer, extra volume boost button, hearing aid
compatibility and tone control for clear sound adjustable to
your hearing needs. For more information about accessories
or other Doro products please visit www.doro.com.
Installation
This device is intended for the analogue telephone network
lines in AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR,
HU, IE, IS, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SE, SI, SK.
Connection
1. Connect the mains adapter to an electrical wall socket
and to yon the base unit.
2. Connect the telephone line cord to a network wall socket
and to Kon the base unit.
3. Insert the batteries 2 x 1.2 V AAA NiMH into the handset
in accordance with the markings.
4. Place the handset in the base unit to charge (24 hours
the first time).
Note! Use the telephone line cord supplied. An existing line
cord from a previous phone may not be compatible.
English
2
Basic setup
Language setup
1. Press w/0. Select (}/{)HS SETTINGSHS SETTINGS.
Press w/0.
2. Scroll to LANGUAGE. Press w/0.
3. Scroll to ENGLISH. Press w/0.
4. Press Lto exit the menu.
Date/Time setup
1. Press w/0. Select (}/{)HS SETTINGS. Press w/0.
2. Select DATE & TIME. Press w/0.
3. Select DATE FORMAT and press w/0. Select DD-MM-YY
or MM-DD-YY and press w/0.
4. Select TIME FORMAT and press w/0. Select 24 HR or
12 HR. Press w/0.
5. Select SET TIME and press w/0.
6. Enter current time. Press w/0.
7. Select SET DATE. Press w/0.
8. Enter current year followed by date (DD – MM). Press w/
0.
Note! You need to set the correct date and time to gain full
functionality.
Operation
Calls
Note! It is not possible to make or receive a call on the base
unit if the handset is already using the line and vice versa.
English
3
Make a call
1. Enter phone number. Delete with c.
2. Press qto make the call. Press Lto end the call.
Base unit: Speed dial
Once Speed dials have been saved you only need to press one
button to make a call.
Store speed dial
1. Press w/0.
2. Select HS SETTINGS, press w/0.
3. Select DIRECT MEM., press w/0.
4. Select M1–M3 and press w/0.
5. Enter phone number. Delete with c. Press w/0.
Speed dialling
1. Base unit: press the equivalent button (M1–M3).
2. Press to end the call.
Receive a call
An incoming call is indicated on the display with a blinking
and with flashing blue ringer LEDs on the base unit and the
handset.
Tip: When someone calls, you can press Lto turn off the
handset’s ring signal.
Handset
1. Press qto answer.
2. Press Lto end the call.
Base unit
1. Press to answer.
English
4
2. Press again to end the call.
Redial
Press . Scroll through the 10 most recently dialled numbers
with }/{. If the number is already in the phonebook, the
corresponding name will also be displayed. Press qto call
the displayed entry, or press w/0for the submenu, see Pho-
nebook, p.6.
Call timer
During a call the display will show a timer HH-MM-SS, indicat-
ing the call duration.
Sound
Volume control
During a call, press }or {to adjust the volume. The volume
level is indicated on the display.
Tip: When you end the call, the setting will remain at the last
selected level.
Boost (sound amplification)
CAUTION
The handset volume can be very loud. Boost should only be
used by persons with impaired hearing ability.
Press on the side of the handset, to activate/deacti-
vate the volume Boost. When activated the LED indicator illu-
minates and is displayed. Boost cannot be activated in
speaker mode. Boost is deactivated at the end of each call to
avoid harming people with normal hearing.
Hearing aid compatible
English
5
CAUTION
Do not use extra sound amplification (boost) together with a
hearing aid if not necessary. The handset volume can be
turned up very loud.
This telephone is hearing aid compatible. Select the T-mode
on your hearing aid to use this feature. Hearing aid compatibil-
ity is not a guarantee that a specific hearing aid will work with
a specific telephone. To ensure that a specific hearing aid
works well with this telephone, test them together before mak-
ing a purchase.
Speaker
To switch between handset/speaker press . When activated
is displayed.
Note! Loud noises (music, etc.) in the background may
interfere with the function. To save power, the speaker phone
and the display light cease to operate at low battery strength.
Mute
During a call, press cto switch on/off the microphone.
Ringer
Press and hold #in standby to turn on/off the handset ring
signal. When ringer is deactivated is displayed.
Note! Base unit ringer is not affected.
English
6
Handle the phone
Keypad lock
Press and hold *to activate/deactivate the keypad lock.
When activated is displayed. Incoming calls can be an-
swered by pressing qeven if the keypad is locked. During
the call, the keypad is unlocked. When the call is ended the
keypad is locked again.
Paging
Press Jon the base unit to page the handset/s. The hand-
set/s will ring and PAGING is displayed. The signal will stop au-
tomatically, or press Jagain, or press Lon the handset.
Return to previous or to standby mode
Press Lonce to return to previous display, continue to
pressLto return to standby mode.
Handset power on/off
Press and hold Lin standby to power on/off the handset.
Phonebook
The phonebook will store 100 entries of names and phone
numbers. Contacts in the phonebook are arranged alphabeti-
cally. Each name can be up to 12 characters in length, and
phone numbers can be up to 24 digits in length.
If you subscribe to a Caller ID service, the name/number of
the caller will be shown when you receive an incoming call (for
those numbers stored in the phonebook or the memories).
Store contacts
1. Press b. Press w/0.
English
7
2. Select ADD. Press w/0.
3. Enter name. Press w/0.
4. Enter phone number. Delete with c. Press w/0.
5. Select required MELODY. Press w/0.
Dial from the phonebook
1. Press b.
2. Scroll }/{between contacts. Quick search the phone-
book by pressing the corresponding number button for
the first letter.
3. Press qto make the call. Press Lto end the call.
Edit contacts
1. Press b.
2. Scroll }/{to the contact you want to edit. Press w/0.
3. Select EDIT. Press w/0.
4. Edit the name. Delete/backspace with c. Press w/0.
5. Edit the number. Delete/backspace with c. Press w/0.
6. Select the required MELODY. Press w/0.
Delete a contact
1. Press b.
2. Scroll }/{to the contact you want to delete and press
w/0.
3. Select DELETE and press w/0.
4. Press w/0to confirm.
PB STATUS
Here you can check how many phonebook entries are stored
and the available storage capacity.
1. Press band press w/0to enter the menu.
Tabla de contenidos
Otros manuales de Teléfono inalámbrico de Doro
Doro
Doro 640r Manual de usuario
Doro
Doro HandlePlus 334gsm Manual de usuario
Doro
Doro 727 Manual de usuario
Doro
Doro 520 Manual de usuario
Doro
Doro PHONEEASY 115 Manual de usuario
Doro
Doro HEARPLUS 318W Manual de usuario
Doro
Doro 5015 Manual de usuario
Doro
Doro COMFORT 1005 Manual de usuario
Doro
Doro 8085 Manual de usuario
Doro
Doro PhoneEasy 740 Manual de usuario
Doro
Doro NeoBio 30 Manual de usuario
Doro
Doro 855 SIM Manual de usuario
Doro
Doro 132 Manual de usuario
Doro
Doro 720 Manual de usuario
Doro
Doro 530R Manual de usuario
Doro
Doro COMFORT 1000 Manual de usuario
Doro
Doro 635ipw Manual de usuario
Doro
Doro AUDIOLINE 20 Manual de usuario
Doro
Doro DECT 160 Manual de usuario
Doro
Doro 840 Manual de usuario
