Dometic SC 1230-PWM Manual de usuario

SC1230-PWM

30 A Solar Charge Controller

Installation and Operating Manual. . . . . . . . 3

ENERGY & LIGHTING

SUN POWER

PS180SolarController-O-NZ.book Seite 1 Montag, 2. Oktober 2017 10:00 10

PS180SolarController-O-NZ.book Seite 2 Montag, 2. Oktober 2017 10:00 10

SC1230-PWM Explanation of symbols

Please read this instruction manual carefully before installation and first

use, and store it in a safe place. If you pass on the product to another

person, hand over this instruction manual along with it.

Table of contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

6 Installing the solar charge controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

7 Using the solar charge controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

9 Maintaining and cleaning the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

10 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

11 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

12 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

1 Explanation of symbols

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

CAUTION!

Safety instruction: Failure to observe this instruction can lead to injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair

the function of the product.

PS180SolarController-O-NZ.book Seite 3 Montag, 2. Oktober 2017 10:00 10

General safety instructions SC1230-PWM

2 General safety instructions

The manufacturer accepts no liability for damage in the following cases:

•Damage to the product resulting from mechanical influences and excess voltage

•Alterations to the product without express permission from the manufacturer

•Use for purposes other than those described in the operating manual

The declaration of conformity can be requested from the manufacturer (contact infor-

mation on the back).

Note the following basic safety information when using electrical devices to protect

against:

•Electric shock

•Fire hazards

•Injury

2.1 General safety

!WARNING!

•Only use the device as intended.

•Disconnect the device

– Before cleaning and maintenance

–Afteruse

– Before changing a fuse

•The device may not be used if the device itself or connection cables

are visibly damaged.

•This appliance may only be repaired by qualified personnel.

Inadequate repairs may cause serious hazards.

•This appliance can not be used by children as well as by persons with

diminished physical, sensory or mental capacities or a lack of experi-

ence and knowledge.

•Electrical devices are not toys.

Always keep and use the device out of the reach of children.

•Children must be supervised to ensure that they do not play with the

appliance.

NOTE

Supplementary information for operating the product.

PS180SolarController-O-NZ.book Seite 4 Montag, 2. Oktober 2017 10:00 10

SC1230-PWM General safety instructions

ANOTICE!

•Check the manufacturer‘s data for your battery and ensure that the

maximum voltage of the solar charge controller does not exceed the

manufacturer‘s recommended charging voltage.

•Do not use the solar charge controller to charge non-rechargeable

batteries.

•Be sure to connect the battery before exposing the solar panel to the

sun.

•Before using the device for the first time, check that the voltage speci-

fication on the rating plate matches that of the power supply.

•Store the device in a dry and cool place.

2.2 Safety when installing the device

!WARNING!

•The electrical installation may only be connected by qualified person-

nel and only in accordance with the national regulations. Incorrect

connection may cause severe hazards.

•Take the precautions necessary to ensure that children cannot inter-

fere with operation. Dangerous situations may occur which cannot be

recognised by children.

ANOTICE!

•Do not expose the device to a heat source (direct sunlight, heating

etc.). Avoid additional heating of the device in this way.

Electrical cables

!CAUTION!

•Lay the cables so that they cannot be tripped over or damaged.

ANOTICE!

•If cables have to be fed through metal walls or other walls with sharp

edges, use ducts or bushings to prevent damage.

•Do not lay cables which are loose or bent next to electrically

conductive material (metal).

•Do not pull on the cables.

•Do not lay AC cables and DC cables in the same duct.

•Fasten the cables securely.

PS180SolarController-O-NZ.book Seite 5 Montag, 2. Oktober 2017 10:00 10

Scope of delivery SC1230-PWM

2.3 Operating the device safely

!WARNING!

•All lead acid batteries produce harmful and explosive gases. The

battery should be mounted in a well ventilated area, as far as possible

from any ignition source. Do not smoke when in the vicinity of the bat-

tery under charge.

ANOTICE!

•Do not disconnect any cables when the device is still in use.

3Scopeofdelivery

•SC1230-PWM solar charge controller

•Installation and operating manual

4 Intended use

The SC1230-PWM solar charge controller (ref. no. 9600005819) can be installed in

motorhomes or caravans to be connected to solar panels to charge house batteries.

The device may only be used inside the vehicle.

5 Technical description

The SC1230-PWM solar charge controller enables mobile power supply from solar

panels for 12 Vg/24 Vg devices and two USB devices. The devices can be

simultaneously supplied with power while the 12 Vg/24 Vg battery is being

charged.

The solar charge controller ensures that the power supplied by your solar panels is at

the right voltage to charge your home or auxiliary battery. The solar charge controller

is PWM controlled. It is an intelligent 3 stage solar controller.

PS180SolarController-O-NZ.book Seite 6 Montag, 2. Oktober 2017 10:00 10

SC1230-PWM Technical description

Solar charge controller

The solar charge controller has the following functions:

•PWM controlled

•Three stage charging (Bulk, Boost/Equalize, Float)

•Battery types selectable: Sealed, Gel, and Flooded

•LCD display dynamically displaying operating data and working condition

•Two USB output ports (maximum output 2.4 A) as power supply charge for

electronic equipment

The solar charge controller has the following protective functions:

•Incorrect polarity protections for solar module and battery

•Battery overvoltage protection

•Battery overheating protection

•Battery over-discharge protection

•Load overload protection

•Load short circuit protection

•Controller overheating protection

Battery temperature sensor (available as an accessory)

The battery temperature sensor allows the solar charge controller to continuously

adjust charge voltage based on measured battery temperature. Temperature com-

pensation of charge voltage assures that the battery receives the proper charge volt-

age as battery temperature changes during normal operation.

PS180SolarController-O-NZ.book Seite 7 Montag, 2. Oktober 2017 10:00 10

Technical description SC1230-PWM

5.1 Connecting and operating elements

No. in

fig. 1Description

1Display

2 MENU button – Browse interface

– Set parameters

3 SET button – Load ON/OFF

– Clear errors

– Enter into Set mode

– Save data

4 Temperature sensor port

5 Solar panel terminals

6 Battery terminals

7 Load terminals

8 USB output ports

+-+-+-

SET

5V Max. 2,4A

USB

Temp.

Sensor

5 6 74

PS180SolarController-O-NZ.book Seite 8 Montag, 2. Oktober 2017 10:00 10

SC1230-PWM Technical description

5.2 Display elements

Source Display Description

PV with menus

solar voltage (V),

solar current (A),

solar power (kWh)

Day

Night

No charging

Charging

BATT. with menus

battery voltage (V),

battery current (A)

battery temperature

(°C/°F))

Battery capacity, in charging

BAT T.TYPE Battery type

LOAD with menus

load current (A),

load power (kWh),

load mode

Load on

Load off

BATT.

LOAD

SOC

AkWh%

TYPE

V °C °F

PS180SolarController-O-NZ.book Seite 9 Montag, 2. Oktober 2017 10:00 10

Installing the solar charge controller SC1230-PWM

6 Installing the solar charge controller

6.1 Mounting the solar charge controller

When selecting the installation location, note the following:

•The device must be installed vertically on a wall.

•The device must be installed on a level and sufficiently sturdy surface.

•The device must be installed in a location that is protected from moisture.

•Do not install the device in a dusty environment.

•There should be a space of 10 cm on all sides around the device.

➤Attach the device with 4 flat-headed screws.

NOTE

Before drilling any holes, make sure that no electrical cables or other

parts of the vehicle can be damaged by drilling, sawing and filing.

USB

+-+-+-

SET

5V Max. 2,4A

Temp.

Sensor

PS180SolarController-O-NZ.book Seite 10 Montag, 2. Oktober 2017 10:00 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Inversor de Dometic

Dometic

Dometic BUTTNER MT PL 300 SI Manual de usuario

Dometic

Dometic BUTTNER MT ICC Series Manual de usuario

Dometic

Dometic TEC29 EV AUS Manual de usuario

Dometic

Dometic SINEPOWER MSI 412 Manual de usuario

Dometic

Dometic Go Power GP-ISW-200 Manual de usuario

Dometic

Dometic MSI912 Manual de usuario

Dometic

Dometic BUTTNER BLACK LINE MT140MC Manual de usuario

Dometic

Dometic TEC 40D Operation Manual de usuario

Dometic

Dometic TEC Series Manual de usuario

Dometic

Dometic MSI912 Manual de usuario

Dometic

Dometic SI 600 acs Manual de usuario

Dometic

Dometic Waeco CombiPower 2012 Manual de usuario

Dometic

Dometic TEC29 EV AUS Manual de usuario

Dometic

Dometic T2500 H/HG-LP Manual

Dometic

Dometic TEC29 Manual de usuario

Dometic

Dometic TEC60 Manual de usuario

Dometic

Dometic Go Power! PORTABLE SOLAR KITS GP-PSK-200 Manual de usuario

Dometic

Dometic SINEPOWER DSP1312T Manual de usuario

Dometic

Dometic Go Power! Solar Flex Kit GP-FLEX-55 Manual de usuario

Dometic

Dometic BUTTNER MT SM 65 TL Manual de usuario

Dometic

Dometic DSP612 Manual de usuario

Dometic

Dometic MSI2312T Manual de usuario

Dometic

Dometic TEC29EV Manual de usuario

Dometic

Dometic Enerdrive ePOWER EN1105S-24V Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario