DMP Electronics 736P Radionics Guía de instalación

INSTALLATION AND PROGRAMMING GUIDE

736P Radionics™ Popit

Interface Module

About the 736P........................................... 1

Feature ..................................................................... 1

736P Features .............................................2

Install the 736P...........................................3

Mount the Module ............................................... 3

Wire the Module .................................................. 5

Connect to the Keypad Bus ............................ 5

Connect to the LX‑Bus...................................... 5

Connect Popex and Octopopit Modules.... 7

Convert Zonex Points to DMP Zones .......... 9

Test the Module..................................................25

Additional Information ........................... 26

Wiring Speciﬁcations.......................................26

Tamper Switch Connection ...........................26

Radionics Terminology.................................... 27

Compatible Radionics Devices .................... 27

TABLE OF CONTENTS

Product Speciﬁcations ............................28

Accessories................................................28

Compatibility ............................................28

Certiﬁcations............................................ 29

Underwriters Laboratory (UL Listed)........29

Digital Monitoring Products, Inc. | 736P Installation and Programming Guide 1

The Model 736P Radionics™ POPIT Interface Module allows a Radionics POPIT System to

interface to a DMP panel, while maintaining the existing Radionics wiring.

The 736P is supervised and connects to either the DMP Keypad Bus or LX‑Bus and

supports up to 32 Keypad Bus zones and up to 100 LX‑Bus zones.

All ﬁre device installations must be in accordance with the manufacturer’s instructions,

NFPA standards, and the Authority Having Jurisdiction (AHJ) requirements.

ABOUT THE 736P

2 736P Installation and Programming Guide | Digital Monitoring Products, Inc.

736P FEATURES

Figure 1: 736P PCB and LEDs

DRXD

DTXD

ZRXD

ZTXD

KEY

119

RED

BLK

DMP Bus Zone Expander

+AUX ZX DOUT COM

DMP Bus Receive Data

Transmit Data

Radionics Bus Receive Data

Transmit Data

Indicator LEDs

Digital Monitoring Products, Inc. | 736P Installation and Programming Guide 3

INSTALL THE 736P

Mount the Module

The736P comes in a high‑impact plastic housing that you can mount directly to a

wall, backboard, or other ﬂat surface. For easy installation, the back of the housing

contains multiple holes that allow you to mount themodule on a single‑gang switch

box or ring. Themodule can also be mounted in a DMP enclosure using the standard

3‑hole mounting pattern. Refer to Figure 2and

Figure 3 as needed during installation.

1. Hold the plastic standos against the inside of the enclosure side wall.

2. Insert the included Phillips head screws from the outside of the enclosure into

the standos. Tighten the screws.

3. Carefully snap the module onto the standos.

4 736P Installation and Programming Guide | Digital Monitoring Products, Inc.

Figure 2: Mounting Hole Locations Figure 3: Stando Installation

Mounting

holes

Digital Monitoring Products, Inc. | 736P Installation and Programming Guide 5

Wire the Module

Use18to22gauge wire to connect the736P directly to the Keypad Bus or use a

dual‑ended4‑wire harness to connect directly to the LX‑Bus. This connection allows

the module to communicate with the panel and receive12VDC power. For more

information about wiring, refer to Wiring Speciﬁcations. Refer to Figure 4when

wiring the736P.

Connect to the Keypad Bus

1. Place a jumper across the bottom two LX/KEY pins.

2. Connect a4‑wire harness to the736P DMP BUS header.

3. At the panel, connect the wires to the corresponding Keypad Bus terminals.

Connect to the LX‑Bus

1. Place a jumper across the top two LX/KEY pins.

2. Connect one end of a4‑wire harness to the736P DMP BUS header.

3. At the panel, connect the other end of the4‑wire harness to the LX‑Bus.

6 736P Installation and Programming Guide | Digital Monitoring Products, Inc.

Red

To Keypad

Bus or LX-Bus

Black

Green

Yellow

+AUX to AUX

ZX to OUT

DOUT to IN

COM to COM

Radionics

POPEX or

OctoPOPIT

DMP Bus

Radionics Bus

AUX

OUT

COM

Receive Data

Transmit Data

* All circuits are supervised Class B style 3.5.

* All circuits are power limited Class 2.

Indicator LEDs

Receive Data

Transmit Data

DRXD

DTXD

ZRXD

ZTXD

RED

BLK

DMP Bus Zone Expander

+AUX

DOUT

COM

736P Radionics™ POPIT

Interface Module

KEY

119

Figure 4: 736P Wiring

Otros manuales para 736P Radionics

Tabla de contenidos

Otros manuales de Unidad de control de DMP Electronics

DMP Electronics

DMP Electronics RoBoard RM-G144 Manual de usuario

DMP Electronics

DMP Electronics 734 Guía de instalación

DMP Electronics

DMP Electronics 400 Instrucciones de funcionamiento y mantenimiento

DMP Electronics

DMP Electronics 1134 Guía de instalación

DMP Electronics

DMP Electronics 1116 Manual de usuario

DMP Electronics

DMP Electronics 893A Manual de usuario

DMP Electronics

DMP Electronics 734 Guía de instalación

DMP Electronics

DMP Electronics 893A Manual de usuario

DMP Electronics

DMP Electronics 861 Manual de usuario

DMP Electronics

DMP Electronics 708 Manual de usuario

DMP Electronics

DMP Electronics 738ZplusINT Manual de usuario

DMP Electronics

DMP Electronics 400 Manual de usuario

DMP Electronics

DMP Electronics 734N-WIFI Guía del administrador

DMP Electronics

DMP Electronics 734N Series Guía de instalación

DMP Electronics

DMP Electronics 714 Manual de usuario

DMP Electronics

DMP Electronics XR100 Manual de usuario

DMP Electronics

DMP Electronics RoBoard RM-G145 Manual de usuario

DMP Electronics

DMP Electronics 714-D22 Manual de usuario

DMP Electronics

DMP Electronics 277CAN Manual de usuario

DMP Electronics

DMP Electronics 714N-POE Guía de instalación

DMP Electronics

DMP Electronics 263EXT Manual de usuario

DMP Electronics

DMP Electronics Wiegand 734N Guía de instalación

DMP Electronics

DMP Electronics RoBoard RM-G146 Manual de usuario

DMP Electronics

DMP Electronics 734INT Guía de instalación

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario