Dji OSMO MOBILE SE Manual de usuario

User Manual 2022.09

v1.0

Using this Manual

Legend

Important Hints and Tips

Before Use

Read the following documents before using DJITM OSMOTM Mobile SE:

1. Safety Guidelines

2. Quick Start Guide

3. User Manual

It is recommend to watch all tutorial videos on the official DJI website (www.dji.com/

osmo-mobile-se/video) or in the DJI Mimo app. Read the safety guidelines and quick start

guide before using for the first time. Refer to this user manual for more information.

Downloading the DJI Mimo App

Scan the QR code above to download the latest version of DJI Mimo app.

The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version

of DJI Mimo is compatible with Android v8.0 and later.

DJI Mimo App

https://s.dji.com/guide37

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are

using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or

Command+F on Mac to begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to

that section.

Printing this Document

This document supports high resolution printing.

Using this Manual 2

Legend 2

Before Use 2

Downloading the DJI Mimo App 2

Introduction 4

Overview 4

Getting Started 5

Charging 5

Attaching the Phone 5

Using Osmo Mobile SE 7

On-board Features 7

Operating Mode 10

DJI Mimo App 11

Connecting to the DJI Mimo App 12

Camera View 12

Firmware Update 16

How to Update 16

Storage 16

Specifications 17

Contents

Introduction

Boasting 3-axis stabilization, the lightweight Osmo Mobile SE unlocks the full potential

of your mobile phone. The foldable magnetic design makes setup easier than ever,

transportation and storage more convenient. Osmo Mobile SE can be operated in both

portrait and landscape, while the upright, underslung, side grip, and low position modes

help capture the perfect shot. Take content to the next level through DJI Mimo with

ActiveTrackTM 5.0, DynamicZoom, and Pano. The Story mode, Timelapse, and ShotGuides

provide step-by-step tutorials according to the scenario and help generate a video that

can be shared on social media.

Overview

1. Magnetic Phone Clamp 3

2. Roll Motor

3. M3×0.5 Screw Hole

4. Pan Motor

5. Status Panel

6. Joystick

7. Zoom Slider

8. 1/4"-20 UNC Port

9. Charging Port (USB-C)

10. Switch Button

11. Shutter/Record Button

12. Power/M Button

13. Tilt Motor

14. Trigger

Osmo Mobile SE is compatible with DJI OM Fill Light Phone Clamp, which can be

purchased in the DJI Store.

910

Getting Started

Charging

To charge Osmo Mobile SE, connect a USB adapter (not included) to the charging port

using the power cable. The battery is fully charged when the battery level indicator turns

off on the status panel.

Charging time: approx. 2 hours and 12 minutes (tested in the environment temperature

of 25° C when using a 10 W charger)

Max runtime: approx. 8 hours (tested with the gimbal balanced and held steadily. This

value should be taken as a reference only)

Attaching the Phone

1. Attach the magnetic phone clamp in the center of the phone. The magnetic phone

clamp can be stretched to adapt to the mobile phone width. The camera mark should

point towards the camera of the phone.

Osmo Mobile SE User Manual

The anti-slip pads help to secure the mobile phone and the magnetic phone clamp. Attach

the anti-slip pad to the magnetic phone clamp as shown in the figure below and press

down firmly.

Magnetic Phone Clamp Tips

Make sure the direction of the magnetic phone clamp is the same as shown in the figure

above. For optimal performance, make sure the magnetic phone clamp is in the middle of

the mobile phone, and the distance between the clamp arms is the same.

2. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the

mobile phone to Osmo Mobile SE.

3. Unfold the gimbal as shown. Press and hold the M button to power on. Osmo Mobile

SE will stabilize once the gimbal mode indicator lights up on the status panel.

M Button

When powered off

Press once: check the battery level

Press and hold: power on

When powered on

Press once: switch between gimbal modes

Press three times: enter standby mode (press any button to exit)

Press and hold: power off. Press and hold for 20 seconds to force

power off

Using Osmo Mobile SE

On-board Features

Status Panel

Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.

System Status Indicator Descriptions

Blinking Pattern Descriptions

Solid yellow Bluetooth disconnected

Solid green Bluetooth connected

Pulses yellow or green Standby mode

Blinks red and green alternately Firmware updating/firmware update failed

Solid red Abnormal status detected

Battery Level Indicator Descriptions

Blinking Pattern Battery Level

Blinks red quickly ≤5%

Solid red 6%-19%

Solid yellow 20%-60%

Solid green >60%

Gimbal Mode

Follow: pan and tilt axes follow, where both the pan and tilt axes follow the movement

of the grip. Suitable for scenarios when moving up and down or on a slant.

Tilt Locked: only the pan axis follows, where only the pan axis follows the movement

of the grip. Suitable for scenarios such as arc shots or moving from left to right.

FPV: pan, tilt, and roll axes follow, where all three axes follow the movement of the

grip. Suitable for shooting the first-person view.

SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis

rotation. SpinShot enables footage to be shot while rotating the camera 360°. This is

suitable for shooting push, pull, and down.

Osmo Mobile SE User Manual

Zoom Slider

Move the slider to the + direction to enlarge the subject and move

the slider to the - direction to shrink. Push the slider once to

change the zoom once. Push the slider continuously to change the

zoom continuously.

Joystick

Move vertically and horizontally to tilt and pan the mobile phone.

The joystick control direction can be set in DJI Mimo. Use the

joystick to navigate through settings on the Quick Settings page.

Shutter/Record Button

Press once: take a photo or start or stop recording.

Press and hold: for burst shooting when in photo mode.

Switch Button

Press once: switch between front and rear cameras.

Press twice: switch between landscape and portrait mode.

Press three times: switch between photo and record mode. The

feature can be set to control Quick Settings in DJI Mimo.

Trigger

Press once to start or stop ActiveTrack 5.0 (requires used with

Mimo).

Press twice to recenter the gimbal. When using ActiveTrack 5.0,

the gimbal will recenter to the center of the camera view.

Press once, and then press and hold to adjust the follow speed

to fast mode, release to exit.

Press and hold to enter lock mode. In lock mode, the gimbal will

not follow the handle movements. Release to exit lock mode.

Charging Port (USB-C)

Charge Osmo Mobile SE by connecting a USB adapter to this port.

1/4"-20 UNC Port

The 1/4"-20 UNC port can be used to attach a tripod.

Osmo Mobile SE User Manual

M3×0.5 Screw Hole

Used to mount counterweights. Counterweights should be used

if a camera lens or microphone is mounted on the mobile phone.

Make sure the total weight of these accessories is less than 290 g.

Combination Operation

Press the switch button, shutter/record button, and trigger simultaneously for more than

one second to reset the Bluetooth name and connection and reconnect.

Osmo Mobile SE will be powered off automatically if there is no operation for three

minutes in standby mode.

Osmo Mobile SE User Manual

Upright Mode

Upright mode can be used without any

further user input. In this mode, press the

trigger twice quickly to center the mobile

phone.

Underslung Mode

Hold Osmo Mobile SE upside down to

enter Underslung mode, in which the

mobile phone can easily capture images

from a lower position. Press the trigger

twice to center the mobile phone.

Side Grip Mode

Rotate Osmo Mobile SE to the right or

left by 90° to go from Upright to Side Grip

mode. Press the trigger twice to center

the mobile phone.

Low Position Mode

Press and hold the trigger, and then tilt

Osmo Mobile SE forward to enter Low

Position mode. The tilt angle is enlarged,

making it more suitable to shoot from a

low position.

Operating Mode

Operation modes apply when used in portrait and landscape mode.

Tabla de contenidos

Otros manuales de Accesorios para cámaras de dji

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario

dji OSMO MOBILE SE Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas