Displays2go RPFIRESFTY Manual de usuario
1
Attach bottom pocket by pinching in both sides of the pocket and pressing
into the holes in the back plate. Press down and click the pocket into place.
Drop dividers down into slots inside of the pocket.
Thread standoffs through all 6 holes along edges. Thread bolts through any
holes in the body and attach nuts to back side.
Fire Safety Panel (1)
Attach both sign holders to the top of the body panel by sliding both key
holes down onto the bolt. Tighten the nut on the back.
3
Standoff (6)
Nuts and Bolts (3)
8.5” x 11” Sign Holder (1)
RPFIRESFTY –Wall Mounted Fire Safety Station V21.06
11” x 17” Sign Holder (1)
2
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact D2g customer service at 844-221-3388.
Pocket (1)
Dividers (5)
RPFIRESFTY –Wall Mounted Fire Safety Station V21.06
Scan QR code to visit
the product page:
Tabla de contenidos
Otros manuales de Vitrina de Displays2go
Displays2go
Displays2go FRCHVWBK Manual de usuario
Displays2go
Displays2go LEDDCP Manual de usuario
Displays2go
Displays2go DCNGDPL Manual de usuario
Displays2go
Displays2go 2TCASE Manual de usuario
Displays2go
Displays2go RPHLTH Manual de usuario
Displays2go
Displays2go DCKDMT Manual de usuario
Displays2go
Displays2go SMSAL39 Manual de usuario
