Displays2go DF065NLB Manual de usuario

65” Floor

Standing

Digital Signage,

Non-Touch

USER MANUAL

SKU: DF065NLB

FCC ID: 2ASCB- DF065NLB

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes/modiﬁcations to this equipment not approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Thank you for purchasing this

product from Displays2go.

It’s our mission to help you connect with the world and build your brand with products

that are personalized to your needs.

Your product has been manufactured with great care using only the ﬁnest quality

materials and expert workmanship. Our Quality Assurance team inspects all electronics

during assembly process to assure reliable operation.This product comes with a

12-month warranty. Scan the QR code to visit the product page and learn more about

your warranty.

Need assistance? We are available for expert advice and all of your customer service

needs.

18776713388

Call Us

INFO@ DISPLAYS2GO.COM

Email Us

DISPLAYS2GO.COM

Chat Us

TABLE OF CONTENTS

BEFORE USE

REFERENCE

OPERATION

DIVIEX

Safety and Warnings

Remote Control

Technical Speciﬁcations

Interface Diagram

Troubleshooting Guide

Add Media to USB

Power On/Off

Cleaning and Maintenance

FCC Compliance Notice

DiViEX App Settings

Packing List

Settings

Android 11 Quick Start Guide

HDMI Connection

Names and Contents of Toxic and Hazardous

Substances or Elements in the Product

Assembly 7

Warning: May cause personal injury or death

The operation is prohibited

Caution: May cause damage or property loss

If coal gas or other ﬂammable gas leaks, do not pull out the plug of the LCD digital signage or other

electrical appliances; instead, turn off the gas valve immediately, and open the doors and windows

quickly.

BEFORE USE

Safety Warnings and Precautions

Thank you for purchasing the high-performance multi-functional LED backlight Digital Signage from Displays2Go.

We have considered the factors to ensure personal safety in product design and have tested rigorously at the factory.

However, improper installation and use may result in electric shock and ﬁre.

In order to safely use, maximize performance of the unit and extend the life of the product, please read and follow all

instructions carefully before using the product. Keep the instructions for future reference.

We strongly recommend using a surge protector, or a power strip with internal circuit breaker to prevent damages to

the digital signage.

If any of the following occurs:

• Power outage or instable voltage.

• Abnormal sound or smell from the unit.

• AC power cord is damaged.

• Digital Signage is damaged due to drop, knock or impact.

• Any liquid or foreign matters fall into the enclosure.

Turn off the Digital Signage immediately, pull out the plug from the power outlet, and ask the authorized

personnel for maintenance timely.

WARNING

• Cut off the power supply before connecting or disconnecting any cables.

• Do not place the Digital Signage on any instable positions, or else it may be damaged or cause ﬁre.

• Do not place the Digital Signage in the positions such as:

• The environment subject to direct strong sunlight, moisture, extreme temperature or too much dust,

• The environment with ﬂammable or explosive materials,

• The environment with ﬂammable or corrosive gases,

• Do not use damaged or inappropriate power outlets, and ensure that the plugs and outlets contact properly.

• Do not let dust or metal deposits adhere to the plugs and outlets.

• Do not damage the power cords:

• Do not modify the power cords,

• Do not place heavy objects on the power cords,

• Keep the power cords away from heat source,

• Do not pull the cord to remove the plug.

• Do not connect too many plugs to one outlet in parallel, or else it may cause ﬁre due to excessive power

consumption.

• Do not approach the Digital Signage with open ﬂame (e.g. a lighted candle), or else it may cause electric

shock or ﬁre.

• Do not put any sharp objects, metal or liquid into the vents or let them touch the signal terminals to avoid

short circuit, product damage, and electric shock.

• The openings in the enclosure are designed for ventilation and cooling, to ensure long time reliable running

of components inside the enclosure and prevent overheating. Do not block the openings when place the unit.

Do not touch the plugs with wet ﬁngers, or else it will cause electric shock.

Do not use the Digital Signage in stormy weather, especially when there is lightning, instead, please

disconnect the power and antenna plugs to avoid lightning strike.

Do not disassemble the Digital Signage without permission, or else it may cause electric shock or ﬁre. Please

ask qualiﬁed technician for repair.

Packing List

If you have any questions regarding our products, please visit us at www.displays2go.com or contact

Displays2go customer service at 844-221-3388.

Name Quantity Name Quantity

Digital Signage 1 Operation Manual 1

Remote Control 1 Power Cord 1

Keys 2 WIFI Antenna 1

Cleaning Kit:

Towel and Glove 1

Wheel screw package:

Cross screwdriver (1)

Cross head pad screw M6*12 (16)

Base screw package:

L-Shaped Wrench (1)

Hex Screws M10*30 (12)

Shim M10 (12)

• Do not let children climb onto the Digital Signage.

• Keep the small parts away from children to prevent them from swallowing.

• If the Digital Signage won’t be used for a long time, please turn it off and pull out the power plug.

• To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to avoid tip

over.

• Do not scratch or knock the LCD with hard object, or twist and squeeze the LCD.

• Do not turn on the unit immediately when it is moved from a place with low temperature to high temperature, or

else it will cause condensation and malfunction.

• Before cleaning the Digital Signage, please pull out the power plug, wipe with soft cloth, do not use industrial

chemicals, prevent foreign matters from entering the machine. Improper cleaning (such as cleaning solution,

water) may damage the product, erase the printed information, and even cause damage of the components if

ﬂuid ﬂows in, resulting in machine failure.

• If the unit displays the same screen for a long time or the moving picture has ﬁxed text or icon, it will leave

ghosting on the screen and won’t disappear when the unit is turned off, it is normal and isn’t covered by the

warranty.

• The power of the Digital Signage can be cut off by pulling out the plug.

• If the LCD screen ruptures and the liquid splashes on the skin, please rinse for 15 minutes with clean water

immediately, and consult your doctor.

• To carry the Digital Signage with hands, please grab and hold the edges, do not apply pressure on the panel.

• Use the Digital Signage properly: Use in proper lighting conditions, insufﬁcient lighting or long time watching

will impair your eyesight.

• Unplug device to disconnect from power.

• Insert the plug into the outlet properly, or else it may cause sparks and ﬁre.

The technical speciﬁcations printed herein and on the packaging are subject to change without prior notice. The

Manual may be slightly different from actual operation, and the latter is applicable.

CAUTION

Assembly

UNPACKING

NOTE: Two people required for safe assembly of product.

Open the top cover. Remove base from package

and carefully set aside.

Have 2 people carefully remove unit from the package.

Set it down on the shipping box to avoid scratches.

ASSEMBLING UNIT

Have one person slightly tip the unit upward. Attach base

to unit using hex screws. Tighten all the base screws with

L-shaped hex wrench.

Have 2 people carefully lift into the standing position.

Screw antennas into antenna receivers on top of the unit.

Assembly is complete.

Flip base over. Insert caster posts into corresponding base

slots. Screw hex screws into the 4 screw holes for each caster.

Tighten all screws with cross screwdriver.

NOTE: Casters can be locked for safety.

1 2

Power

Mute

Navigation Arrows

Select

Home

(No Function)

Return to Previous Page

Background Applications

Volume Down/Up

PRECAUTIONS FOR SAFE USE

OPERATION

• Keep the remote control away from violent vibration. In addition, do not set or place the remote control in direct sunlight, or else the

remote control may be deformed by heat.

• The distance of remote control will be shortened if the battery voltage is insufﬁcient, in this case, please replace with new batteries, if the

remote control won’t be used for a long time or the batteries are run out, please take out the batteries to avoid corrosion due to battery

leakage, which will damage the remote control.

• Do not use batteries of different types or mix new batteries with old ones. Always replace the batteries in pairs.

• Do not put the batteries in ﬁre, or charge or disassemble them, or charge, short circuit, disassemble, heat or burn used batteries. Please

dispose of waste batteries in accordance with local environmental regulations. Do not expose the batteries in overheated environments

such as sunlight and ﬁre.

To control the unit, aim the

remote control at the unit’s

receiver, located at the right

corner below the screen.

For best performance, avoid

exposing the receiver window to

direct sunlight or placing objects

between the remote control and

the receiver.

Remote Control

Power On/Off

HDMI Connection

Interface Diagram

CAUTION: Disconnect the power plug before assembling or disassembling the unit!

NOTE: For the safety of your product, we recommend use of a surge protector when connecting to power.

NOTE: Some media players may not be supported.

• Power on by inserting the power cord into unit and connecting to outlet.

• To turn the screen on or off, press the power button on the remote control.

• To shut down, press the power button on the remote control, then unplug the unit.

1. Connect PC or media player via HDMI port.

2. Open the HDMI In app (see next page for instructions on navigating applications).

The HDMI input appears on screen.

USB Interface (3) Ethernet (RJ45) Port HDMI IN Power Port I/O Switch

HDMI IN

WI-FI CONNECTION

SYSTEM LANGUAGE

SCREENSHOTS

BLUETOOTH

SOUND

FACTORY RESET

1. Open Settings, and select Connected Devices.

2. Click Pair New Device. Make sure your bluetooth

device is in pairing mode.

For future connections, select the device from the list of

previously connected Bluetooth devices.

1. Open Settings, and select System.

2. Click System Language, then click Languages.

3. Click + Add a language and select a language. It

appears as the 2nd installed system language.

4. Drag your preferred system language to ﬁrst position.

of the list. The system language updates automatically

to the ﬁrst listed language.

1. Open Settings, and select Sound.

From this menu, you can individually control the volume of

alarms, calls, notiﬁcations, and your media.

You can also change default notiﬁcation sounds or turn Do

Not Disturb on or off.

Settings

ANDROID 11 QUICK START GUIDE

Once turned on, the unit automatically displays the home screen, which

includes the navigation bar and the App Drawer.

NOTE: The Navigation bar can be minimized. To restore the

navigation bar, go into Display settings and enable Display

Navigation.

Adjust settings by tapping the App Drawer, and launching the Settings app.

1. Open Settings, and select Network and Internet from

the list of settings.

2. Select your Wi-Fi network and enter your login

credentials. Click Okay.

For Ethernet Connections, plug an ethernet cable into the

ethernet (RJ45) port of the unit and connect to internet

router. Ethernet network connection is complete. NOTE: To share ﬁles over bluetooth, you must enable

Wi-Fi and Bluetooth Scanning in the Location settings.

1. Open Settings, and select Screenshot.

2. Adjust the screenshot delay and enable or disable

the Screenshot button in the navigation bar.

Find recent screenshots in the Google Files app.

Choose the unit, click Pictures, then click Screenshots.

1. Open Settings, and select System.

2. Select Advanced Options.

3. Click Reset Options.

4. Select Erase All Data (Factory Reset). Then click

Erase All Data.

Shows all apps

App Drawer

Home

Background Applications

Back

Volume Down Volume Up

Take Screenshot

Navigation Bar

Enlarged view left

Tabla de contenidos

Otros manuales de Señalización digital de Displays2go

Displays2go

Displays2go DGSNFSTCH55WH Manual de usuario

Displays2go

Displays2go DGBP3BL Manual de usuario

Displays2go

Displays2go DG21FLR5P Manual de usuario

Displays2go

Displays2go DGWMTCH32 Manual de usuario

Displays2go

Displays2go SBXSTCH43 Manual de usuario

Displays2go

Displays2go DGHBDWS55 Manual de usuario

Displays2go

Displays2go DGSNFSNT43 Manual de usuario

Displays2go

Displays2go DGSNFSTCH55 Manual de usuario

Displays2go

Displays2go DF043TLBD Manual de usuario

Displays2go

Displays2go DGODPSGN43 Manual de usuario

Displays2go

Displays2go DGAFNT43 Manual de usuario

Displays2go

Displays2go DF055TLWE Manual de usuario

Displays2go

Displays2go DK043TLBA Manual de usuario

Displays2go

Displays2go DW065TLB Manual de usuario

Displays2go

Displays2go DW043NSB Manual de usuario

Displays2go

Displays2go DP043NLB2 Manual de usuario

Displays2go

Displays2go DP043NLBS Manual de usuario

Displays2go

Displays2go DGLCDPEDWH Manual de usuario

Displays2go

Displays2go DGFSTCH55 Manual de usuario

Displays2go

Displays2go DGFSKATCH32WH Manual de usuario

Displays2go

Displays2go DGFSATCH15 Manual de usuario

Displays2go

Displays2go DP021NLB Manual de usuario

Displays2go

Displays2go DGAFNT32S Manual de usuario

Displays2go

Displays2go DGNTFSPS65 Manual de usuario

Manuales populares de Señalización digital de otras marcas

LG 72WS70MS-B Manual de usuario

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

LG 65SM5D Manual de usuario

LG 55EW5TK-A.AUS Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

LG 47VL10 Manual de usuario

LG WP400 Guía de inicio rápido

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

LG 22XE1J Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

Samsung

Samsung IWJ Series Manual de usuario

LG 84TR3B Manual de usuario

LG 55EJ5D Guía de inicio rápido

EVERI

EVERI Enrollment Kiosk Manual de usuario

LG 75XS4G Manual de usuario