Directed DS3+ Manual de usuario

DS3+ / DS4+ 933.TL10

v2.29.195.3

2017 Toyota Camry (H Key)

THTON4 Compatible

(Sold Separately)

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Key type 5

Installation 6

Wiring diagram with T-Harness (THTON4) 6

Wiring diagram with T-Harness (THTON9) 7

Wiring diagram 8

Locating components in the vehicle 9

Vehicle connections 10

Module programming 13

(For security-only programming, see next section.) 13

Module programming for security-only installations 14

Pairing remotes 15

Connecting the module 15

8556T Temperature Sensor 15

8504D Combo Sensor 15

RF Systems 15

When used in conjunction with SmartStart 16

D2D port configuration 16

Manual transmission 17

LED diagnostics and troubleshooting 18

Soft reset 20

Hard reset 20

Tach learning procedure (not needed with Virtual Tach) 21

Initializing Virtual Tach (not needed with hardwired or data tach applications) 21

Limited lifetime consumer warranty 22

Quick reference guide 23

Contents

3933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Introduction

This guide provides information on the installation of the DS3/DS3+ and DS4/DS4+ modules as a digital solution. Using these modules in a

digital conﬁguration require the module to be ﬂashed with vehicle speciﬁc ﬁrmware. Refer to our website (www.directechs.com) and click on

the DIRECTLINK text in the header for additional information.

DS3/DS3+ and DS4/DS4+ modules provide an all-in-one solution for most modern vehicles, and include remote start, keyless entry, security,

and immobilizer bypass capabilities. T-harnesses may also be used in many applications for easy installation.

The following methods are available to conﬁgure modules:

• Web: www.directechs.com (DS3/DS3+ and DS4/DS4+)

• Desktop Application: Directlink DT (DS3/DS3+ and DS4/DS4+)

• Mobile Device: Directlink App (DS4/DS4+ only)

When Flashing via Directlink DT (Desktop app) or via the Web, an XKloader2 will be required.

To conﬁgure via Web or DirectLink DT (mobile app):

1. Disconnect the main module from any (+) 12V power source.

2. Connect the module to your computer using the XKLoader2.

3. Follow the steps in the pop-up window that will be displayed when the module is detected.

Notes:

•Flashing via web is only possible using Internet Explorer on Windows 8, 8.1, and 10.

•This method is not compatible with any other browser (Edge, Chrome, Firefox, etc.)

•When using Windows 11 or newer, Directlink DT is mandatory.

The DS4/DS4+ module is designed to be conﬁgured using the DirectLink application through mobile devices.

To download the DirectLink mobile application, visit the Google Play or Apple store. They can also be

conﬁgured via Web and DirectLink DT. The DS4/DS4+ features are built in Bluetooth® 4.0, allowing you to

conﬁgure and control your system. The DS3/DS3+ module is not equipped with Bluetooth®, therefore is not

compatible with the DirectLink app for mobile devices.

To conﬁgure via DirectLink DT (mobile app):

1. Follow and complete the wiring diagram(s) related to your installation through the app.

2. When installation is complete, select Conﬁgure DS4/DS4+.

3. Follow the on-screen instructions.

FLASH REQUIRED!

4 White

4933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.

Auto Headlamp Shutoff

Parking Lights Control

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Trunk / Hatch Release

DS4+/DS3+/VSM3 Only

Control of aftermarket alarm with OEM remote

Fuel level/EV battery level

* Odometer

Immobilizer Bypass-Data No Key Req'd

3x LOCK START (Start control using OEM Remote)

3x LOCK STOP (Stop control using OEM Remote)

Accessory Activation

Ignition Activation

Remote Start Takeover

SmartStart

Start (Crank) Activation

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Entry Monitoring Trunk/Hatch Pin

Factory Alarm Trigger Monitoring

Brake Status (foot brake)

Door Locks Status

E-Brake Status

Ignition Status

5933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Pre-installation and application warnings

Firmware notes: This section highlights important information for this speciﬁc ﬁrmware and will assist in

pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.

T-Harness

compatible THTON4 or THTON9 Keys required for

programming 1Keys required for

operation 0

It is important to make sure you DO NOT connect the keysense wire in the installation for each of these vehicles or you will

encounter issues when attempting to start the vehicle.

The optional Plug & Play THTON4 or THTON9 T-Harness is sold separately.

Important! All T-Harness wires NOT listed in the diagram are NOT required for the installation. Loose wires such as Siren

Output and Hood Input may need to be pulled from the tapped section of the T-Harness. Refer to the "Wiring diagram with

T-Harness" for more information on connections and installation instructions.

The T-harness can be used for multiple vehicle installation and therefore it is important to connect ONLY the speciﬁc wires

associated with your vehicle. Refer to the "Wiring diagram with T-Harness" and follow the diagrams connections.

The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.

Unless speciﬁed otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic

connector.

It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each

wiring diagram.

Refer to the "Vehicle connections" following the installation diagram.

General notes: This section highlights important information for this speciﬁc ﬁrmware.

[1] The installation of an aftermarket hood pin is ONLY required on vehicles that are NOT equipped with a factory hood pin.

[2] The siren is ONLY required when enabling the security features during module ﬂashing.

[3] The Green wire is ONLY required for starter disable and antigrind applications.

[4] Autolight Interrupt connection required only if the vehicle is equipped with automatic headlights.

[5] Parking lights, trunk release, lock and unlock connections required when not available through Data.

[6] Depending on the vehicle's trim, the TPMS Ignition Interrupt connection may be required to obtain OEM remote functionality

during runtime. Please note the TPMS light may ﬂash during runtime.

Key type

Some Toyota 2010+ models have different encryption types. Please look at your key blade and identify the markings.

G-stamped keys Standard Key

H-stamped keys

For vehicles with H-stamped keys, see

the TL10 firmware.

For vehicles with G-stamped keys, see

the TL5 & TL7 firmware.

For vehicles with dot-stamped keys,

see the TL11 firmware.

Note: Some replacement keys

may not have any markings on

the key.

6933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram with T-Harness (THTON4)

Body ECU

Connector

456

1617

131415

789

Autolight: Green, pin 20

Headlight Switch

Autolight Interrupt (veh. side): Lt. Green

Autolight Interrupt (conn. side): Lt. Green/White

Ignition Connector

RDA: Orange/Black

Body ECU Connector

(middle conn. left side of steering column)

161718

2930

131415

252627

101112

222324

123

789

192021

RDA: Blue, pin 16

THTON4

(optional T-Harness)

Diagnostic Connector OBDII

Cut

Refer to the "Vehicle wiring reference

chart" for more specific T-harness

compatibility.

Siren

Hood Pin

(-) Hood Input: Gray: 21

(+) Siren Output: Brown/Red: 11

TPMS Ignition Interrupt (conn. side): Blue/White

(-) Parking Lights Output: Lt.Green/Black

TPMS Ignition Interrupt (veh. side): Blue

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

IMPORTANT:

Position the

fuses correctly!

Slide to open

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

12-pin Black Connector

10-pin White Connector

8-pin White Connector

7933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram with T-Harness (THTON9)

Ignition Connector

THTON9

(optional T-Harness)

12-pin Black Connector

Cut the

Violet/White loop

labeled Tach.

NOT USED

TPMS Ignition Interrupt (veh. side): Blue

TPMS Ignition Interrupt (conn. side): Blue/White

Siren

Hood Pin (-) Hood Input: Gray

(+) Siren Output: Brown/Red

NOT USED

Diagnostic Connector OBDII

Cut the

Dk. Green/Black and

Dk. Blue/Black loops

labeled Lock/Unlock.

CONNECT the white

12-pin connector to

the 12-pin Blue

connector labeled B.

Cut the Lt.

Green/Black loop

labeled PKL if

available through

Data.

22-pin White Connector

8-pin White Connector

10-pin White Connector

Body ECU

(White middle conn. left side

of steering column)

Body ECU

Connector

Cut the

Orange/Green and

Orange/Brown loops

labeled CAN2.

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

IMPORTANT:

Position the

fuses correctly!

Slide to open

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

Cut the

Blue/White loop

labeled A/B if

vehicle is

equipped with

Autolights .

8933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram

Body ECU

Connector

456

1617

131415

789

Autolight: Green, pin 20

Diagnostic

Connector OBDII

HS CAN Low: White, pin 14

HS CAN High:

Blue, pin 6

SIL Data: Gray, pin 7

Headlight Switch

(-) Hood Input: Gray: 21

(+) Siren Output: Brown/Red: 11

Siren

Hood Pin

Autolight Interr. (veh. side): Lt. Green: 8

Autolight Interr. (conn. side): Lt. Green/White: 9

(+) Starter 2 Output: White: 5 & 11

(+) 12V Input: Red: 6 & 12

HS CAN Low 1: Tan: 1

HS CAN High 1: Tan/Black: 2

RDA: Orange/Black: 7

SIL Data: Yellow/Black: 8

Body ECU Connector

(middle conn. left side of steering column)

456

161718

282930

131415

252627

101112

222324

123

789

192021

RDA: Blue, pin 16

Cut

(+) Ignition Input/Output: Pink: 10

(+) 12V Input: Red: 5

(+) Accessory Output: Orange: 8

(+) 12V Input: Red/White: 9

(+) 12V Input: Red/Black: 2

(+) Ignition 2 Output: Pink/White: 4

(+) Starter Output (veh. side): Violet: 7

Starter Input (conn. side): Green: 6

1234

(+) Ignition 2:

Pink, pin 1

(+) Ignition 1:

Black, pin 6

(+) Accessory: White, pin 2

(+) Starter:

Blue, pin 7

(+) Starter 2

Lt. Green, pin 3

(+) 12V:

Green, pin 5

Ignition

Connector

(-) Ground: Black: 10

TPMS Ignition Interrupt (conn. side): Blue/White: 1

TPMS Ignition Interrupt (veh. side): Blue: 3

Cut

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

IMPORTANT:

Position the

fuses correctly!

Slide to open

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

(-) Parking Lights Output: Lt.Green/Black: 1

9933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Locating components in the vehicle

10 933.TL10 2.29.195.3 2017 Toyota Camry (H Key)

Vehicle connections

The connection information listed below is specific to the 2017 Toyota Camry (H Key). Refer to “Pre-installation and application warnings” for a list of important notes.

Data harness, 8-pin white connector (H1)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color Connection

H1/1 Tan (Data) HS CAN Low OBD-Data Link Connector, white 16 pin plug, pin 14 Data White Mandatory

H1/2 Tan/Black (Data) HS CAN High OBD-Data Link Connector, white 16 pin plug, pin 6 Data Blue Mandatory

H1/3 Orange/Brown (Data) HS CAN Low No Connection

H1/4 Orange/Green (Data) HS CAN High No Connection

H1/5 Lt. Green No Connection No Connection

H1/6 Violet/Brown No Connection No Connection

H1/7 Orange/Black (Data) RDA Body ECU on dash fuse box, white 30 pin plug, pin 16 Data Blue Mandatory

H1/8 Yellow/Black (Data) SIL Data OBD-Data Link Connector, white 16 pin plug, pin 7 Data Gray Remote Start

Only

Analog input/output harness, 22-pin white connector (H2)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color Connection

H2/1 Lt. Green/Black (-) Pk Light Output [5] Headlight Switch, black 20 pin plug, pin 18

Parking lights connection required when not available through Data

- Black Optional

H2/2 Blue/White No Connection No Connection

H2/3 Dk. Green/Black No Connection No Connection

H2/4 Red/White (-) Trunk Output No Connection

H2/5 Brown/Black No Connection No Connection

H2/6 Brown/White No Connection No Connection

H2/7 White (+) No Connection No Connection

H2/8 Violet/Black No Connection No Connection

H2/9 Dk. Blue/Black No Connection No Connection

H2/10 Lt. Blue/Black No Connection No Connection

H2/11 Brown/Red (+) Siren Output [2] Security Only

H2/12 Pink No Connection No Connection

H2/13 Violet No Connection No Connection

H2/14 Brown No Connection No Connection

H2/15 White/Blue No Connection No Connection

H2/16 Red/Blue No Connection No Connection

H2/17 Black/White No Connection No Connection

H2/18 Orange/Black No Connection No Connection

H2/19 Blue No Connection No Connection

H2/20 Green No Connection No Connection

H2/21 Gray (-) Hood Switch Input [1]

Otros manuales para DS3+

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Directed

Directed

Directed DIRECTWIRE DIRECTECHS THGMN4 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs NISS07 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed DBALL Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed 403.SUBARU1 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed DS3+ Manual de usuario

Directed

Directed DS4+ Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Xpresskit DBALL2 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed 403.SUBARU2 Manual de usuario

Directed

Directed XpressKit DBALL Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Directed

Directed DS3+ Manual de usuario

Directed

Directed Directechs DB3 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario