Direct Supply Attendant SOLO-DS Manual de usuario

Attendant®

BLUETOOTH

COLUMN SCALE

Please keep and refer to this Owner’s Manual.

Owner’s Manual

Thank you for purchasing an Attendant®Bluetooth Column Scale. Please read this entire guide carefully and keep it

for future reference. This guide will provide you with instructions, warnings, warranty information and other important

information about your Attendant®Bluetooth Column Scale. Share this information with those individuals who will be

assembling, using, servicing and/or cleaning the Product to help ensure it is cared for properly.

1-800-245-9917

FCC ID:2AWG7-SOLO-DS

Model Name: SOLO-DS

Table of Contents

Introduction .............................................................................................................................. 3

Definitions and Symbols........................................................................................................... 3

Warnings .................................................................................................................................. 4

Proper Disposal ........................................................................................................................ 4

FCC Compliance Statement..................................................................................................... 4

Specifications ........................................................................................................................... 5

Features .................................................................................................................................. 5

Installation .........................................................................................................................6 - 10

Unpacking ............................................................................................................................ 6

Assembly .........................................................................................................................7 - 9

Installing The Carpet Feet................................................................................................... 10

Optional Handrail Installation...........................................................................................11 - 12

Unpacking ........................................................................................................................... 11

Installation....................................................................................................................11 - 12

Unit Selection......................................................................................................................... 13

Battery Operation................................................................................................................... 14

Installation/Replacement..................................................................................................... 14

Low Battery ........................................................................................................................ 14

Automatic Shutoff............................................................................................................... 14

Optional AC Power Adapter................................................................................................... 15

Operation.........................................................................................................................16 - 20

Keypad Functions ............................................................................................................... 16

Annunciators....................................................................................................................... 17

Weighing Mode .................................................................................................................. 18

Height and/or BMI Measure Mode..................................................................................... 19

Optional BMI Mode ............................................................................................................ 19

Height Rod Operation......................................................................................................... 20

Setup ...............................................................................................................................21 - 22

Calibration........................................................................................................................23 - 24

Data Transmission Format ..................................................................................................... 25

Bluetooth Low Energy............................................................................................................ 26

Display Messages .................................................................................................................. 27

Troubleshooting...................................................................................................................... 28

Care and Cleaning .................................................................................................................. 29

Limited Warranty.................................................................................................................... 30

Customer Service................................................................................................................... 31

1-800-245-9917

Introduction

Thank you for purchasing the Attendant®Bluetooth Column Scale. This scale has been tested before

leaving the factory to ensure accuracy and dependability for years to come.

In this owner’s manual, you’ll find important information you should read before assembling or using

this product. Please keep this manual in a safe place for future reference.

If at any time you do not understand how to use this product, or you suspect it may be damaged,

DO NOT USE and immediately contact the distributor that sold this product to you.

This owner’s manual is compiled from the latest specifications and product information available at the

time of publication. Changes may be made to this manual at any time. Contact your distributor for a

current copy of this owner’s manual.

Deﬁnitions and Symbols

NOTE: Indicates a tip.

CAUTION: Indicates correct operating or maintenance procedures in order to prevent damage to

or destruction of the equipment or other property.

WARNING: Calls attention to a potential danger that requires correct procedures or practices in order to

prevent personal injury.

:Attention. Read the instructions.

:Electrical Shock Hazard Warning.

Device: Your Attendant Bluetooth Column Scale

We, Us and Our: Direct Supply Manufacturing, Inc.

You means the user, caregiver or any other individuals who will be using or servicing the product.

Distributor means the reseller or other entity from whom you purchased this product.

Medical Professional: The physician or other healthcare professional who is familiar with the user’s

medical history and current medical condition, and who is responsible for determining if this product is

medically appropriate for the user.

Caregiver: The individual(s) responsible for the care and needs of the user, such as a spouse,

adult family member or home health aide. The caregiver must be available at all times to provide

the user with physical and cognitive assistance and provide supervision as needed.

User: The individual who uses the device.

Serial Number

Date of Purchase

Purchased From

RETAINTHIS INFORMATION FOR FUTURE USE

Introduction

Warnings, Proper Disposal &

FCC Compliance Statement

Warnings

Read and follow all directions and warnings before use or assembly. Do not use or assemble if you do

not understand the contents of this manual – contact your distributor for assistance. Damage, injury,

or even death may result from improper use of this product or not following directions and warnings.

This product is intended for use in normal, indoor conditions.This product may not be appropriate for

all individuals.

WARNING: Prior to use of this product, the User’s Medical Professional should be consulted to

ensure this product is appropriate for the User’s speciﬁc needs based upon his or her overall medical

condition and limitations.

Proper Disposal

When this device reaches the end of its useful life, it must be properly disposed of. It must not be

disposed of as unsorted municipal waste. Within the European Union, this device should be returned

to the distributor from where it was purchased for proper disposal.This is in accordance with EU

Directive 2002/96/EC. Within North America, the device should be disposed of in accordance with the

local laws regarding the disposal of waste electrical and electronic equipment.

It is everyone’s responsibility to help maintain the environment and to reduce the effects

of hazardous substances contained in electrical and electronic equipment on human

health. Please do your part by making certain that the device is properly disposed of. The

symbol shown to the right indicates that this device must not be disposed of in unsorted

municipal waste programs.

FCC Compliance Statement

This equipment generates, uses, and can radiate radio frequency and if not installed and used in

accordance with the instruction manual, may cause interference to radio communications. It has

been designed within the limits for a Class A computing device pursuant to Subpart J of Part 15 of

FCC rules to provide reasonable protection against such interference when operated in a commercial

environment. Operation of this equipment in a residential area may cause interference in which case

the user will be responsible to take whatever measures necessary to correct the interference.

You may ﬁnd the booklet “How to Identify and Resolve Radio TV Interference Problems” prepared by

the Federal Communications Commission helpful. It is available from the U.S. Government Printing

Ofﬁce, Washington, D.C. 20402. Request stock No. 001-000-00315-4.

1-800-245-9917

Speciﬁcations & Features

Speciﬁcations

Capacity: 550 lb. x 0.2 lb (250 kg x 0.1 kg)

Weight Units: Pounds or Kilograms (selectable)

Power Requirements: Six (6) “AA” size Alkaline batteries (included) OR an optional 9V

AC/DC wall plug-in adapter

Display: Five digit, seven segment, 1.0" (25 mm) high LCD

Operation Temperature: 50 to 104 ºF (+10 to +40 ºC)

Function Keys: ON/OFF, BMI HEIGHT, ENTER, LOCK/RELEASE, PRINT, ZERO,

UP ARROW and DOWN ARROW

Dimensions: 14.3"W x 19.5"D x 52.0"H

(36.3 cm W x 49.5 cm D x 132.1 cm H)

Weight: 17.7 lb. (7.7 kg)

Height Rod Units: Inch or cm

Height Rod Range: 30 to 84.5" (76 to 214.5 cm)

Features

• Low-proﬁle platform (2.4" / 6.1 cm high)

• Body Mass Index (BMI) calculation

• OneWeigh weighing units locking into pounds or kilograms1

• Manual input height 2' 0.0" to 7' 10.5" by 0.5" (60.0 cm to 240.0 cm by 1 cm)

• Audible beep conﬁrmation (A short beep when a key is pressed, and a long beep for when weight is

stable and locked)

• Selectable Auto Shut-Off feature (up to 9 minutes)

• Auto Weight Lock feature on stable weight

• Power-Up Zero

• USB output function (ASCII protocol)

• Bluetooth Low Energy (BLE)

• Integral wheels

• In-line mechanical height rod

• Optional handrail available

1The weighing units are selected at Scale Initialization (when the scale is powered on for the ﬁrst time).

Operating frequency: 2402MHz-2480MHz

Installation

Unpacking

Remove Display with Upper Outside and Inside Column (1) (already assembled), Lower Inside

Column (2), Lower Outside Column (3), Scale Platform (4) and Hardware Pack (6) from shipping

carton. After removing from carton, check for any damage that may have taken place during

shipment. Keep and use the original carton and packing material for return shipment if it should

become necessary. Remove all plastic wrapping, foam ﬁllers and cardboard material from scale

platform, display and other components.You should have the following components:

1 – Display with Upper Outside and Inside Column (pre-assembled)

2 – Lower Inside Column

3 – Lower Outside Column

4 – Scale Platform (with Column Housing Cover)

5 – (4) Carpet Feet

6 – Hardware Pack, containing:

(4) M5 x 15 Machine Screws

(4) Lock Washers

(2) M3 x 12 Screws

2 3



1-800-245-9917

Assembly

Step 1

1. Align Part 2 (lower inside column) with Part 1 (pre-assembled display upper outside display upper

outside display upper outside display upper outside display upper outside display upper outside

and inside column and inside column ).

2. Press the parts together until the locking tab snaps in place.

3. Ensure that the locking tab is locked securely.

Ensure locking tab is

securely locked.

1 2

Installation(cont.)

Step 2

1. Align Part 3 (lower outside column) with assembled Part 1 and 2 (display upper outside and inside

column, and lower inside column).

2. Press the locking tab (on Part 2, lower inside column) inward and then insert into Part 3 (lower

outside column).

3. Slide the cable connector through Part 3 (lower outside column).

4. Press Part 3 and Part (1 and 2) together until the locking tab snaps in place.

5. Ensure that the locking tab is locked securely.

6. Install (2) M3 x 12 machine screws (one in each side of Part 3) to secure Part 1 and 2 together

with Part 3.

Press locking tab inward to

insert Part 2 into Part 3.

Slide the cable connector

through Part 3.

Ensure locking tab is

securely locked.

Install (1) M3 x 12 screw on

each side of Part 3.

1-800-245-9917

Step 3

1. Plug the cable connector into the RJ jack located on the Part 4 (scale platform).

2. Align the display and assembled column with Part 4 (scale platform) and insert the column into

opening of the scale platform.

CAUTION! To avoid pinching or cutting the cable, make sure the cable is not between the base

and column when inserting the column into the base.

3. While holding the column in place, carefully lay the scale down with the column horizontal to ﬂoor.

4. Attach the column to the scale platform by inserting the (4) M5 x 15 machine screws and lock

washers through the holes in the scale platform into the threaded holes of the column.Tighten

the screws to secure the column to the scale platform.

The scale should be placed on a ﬂat, level hard-surfaced ﬂoor or low-cut, unpadded carpet, away from

any rapidly moving air source (heating and cooling vents).



CAUTION! Make sure

cable is not between base

and column.



Scale Assembly, Step 3

Installing the Carpet Feet

If you are using your scale on a carpet, it is recommended to use the included carpet feet. To install the

carpet feet, perform the following:

1. Remove the four (4) carpet feet from the packaging.

2. Align the prongs of one carpet foot with the holes in one of the scale’s existing feet.

3. Insert the carpet foot prongs into the holes, making sure the prongs align straight up and down with

the holes of the scale foot.

4. Being careful not to twist the carpet foot, with even pressure, gently push straight down on the

carpet foot to seat it into the scale foot.

5. Repeat steps 2 through 4 for the remaining three scale feet.

Installation(cont.)



Tabla de contenidos

Otros manuales de Escala de Direct Supply

Direct Supply

Direct Supply Attendant 6880DS Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario