Dinstar DAG2000-16S Manual de usuario

Quick Installation Guide

DAG2000-16S

DAG2000-24S

DAG2000-32S

欢迎您选购鼎信通达旗下产品！

安装设备之前请仔细阅读本安装指导。鼎信通达为客户提供全方位的技术支持，需要更多在线

技术支持，请拨打技术支持热线电话：0755-61919966。

网址：www.dinstar.cn

THANKS FOR CHOOSING DINSTAR’S VOIP GATEWAY!

Please read this guide carefully before installing the gateway. If you need any technical

support, .please contact us

Tel: +86 755 61919966

Email: support@dinstar.com

Web: www.dinstar.com

Please confirm your product model before installation and follow the installation

guideline for the model.

Product Model & Number of Ports

Description of Indicators

Indicator Deﬁnition Status Description

Power Indicator

Running Indicator

Telephone In-use

Indicator

Oﬀ

The gateway is powered on

The gateway is powered oﬀ or there is no

power supply

Oﬀ

Slow Flashing

Green Flashing

Network Link

Indicator

Network Speed

Indicator

PWR

RUN

FXS

LAN

The gateway is running properly

If there is a SIP account registered

successfully, the indicator is fast flashing

The gateway is running improperly

FXS port is currently occupied by a call

FXS port is idle or faulty

The gateway is properly connected to network

Work at 100Mbps

Work at 10Mbps

Fast Flashing

Model

Port Type

DAG2000-16S

Network Port RJ11 RJ21

316

DAG2000-24S

DAG2000-32S

For the DAG 2000 series product, FXS Ports support two types, RJ11 or RJ21. Please

check the table above for the number of ports on specific product models;

The gateway is not connected to network or

network connection is improper way

Indicators and Ports

DAG2000-16S

Power Indicator

Running Indicator

Telephone In-use

Indicator

FXS Ports 0-15(RJ11)

DAG2000-24S/32S

Power

Switch

Power Switch

Power

Jack

LAN Ports

Console

Port

Reset Button

Grounding Lug

FXS Ports 0-31 (RJ11)

FXS Ports ( RJ21)

Note: The position of each indicator and interface of DAG2000-24S is the same as on the

DAG2000-32S.

Reset

Button

Telephone In-use Indicator

Power Jack Console Port

100-240VAC

50/60Hz

100-24 0VAC 5 0/60Hz

Installation Attentions

When installing the device, please conﬁrm the type of telephone interface of the device:

DAG2000-16S is equipped with RJ11 ports;

DAG2000-24S/32S is equipped with both RJ11 and RJ21 ports;

Please go to Wire Sequence of this guideline to get more information about wire sequence.

Anti-jamming: to reduce the interference with telephone calls, it's highly recommended that telephone

lines connected to the gateway should be placed away from power cables.

Power supply: the power adapter of the gateway accepts 100-240V AC power supply. Please ensure

safe and stable power supply.

Network bandwidth: please ensure there is enough network bandwidth so as to guarantee stabilized

running of the gateway.

Temperature and humidity: to avoid any accident that might cause malfunction, it's advised to install

the gateway in an equipment room where temperature and humidity are appropriate.

Ventilation: to avoid overheating, please do not pile up the gateway with other devices and make sure

the gateway has good ventilation around.

Mechanical load: please make sure the gateway is placed steadily to avoid damage. It's highly

advised to horizontally place the gateway on a ﬂat surface or a cabinet.

Power Indicator

Running Indicator

Connect gateway with power input and grounding lug

Installation Instructions

Connection Diagram for DAG2000-16S

Connect gateway with network via a switch

Connect FXS ports with analog phones

Connect gateway with power input and grounding lug

RJ11 telephone line

Telephone

AC 100-240V

Grounding

Cable

Grounding Lug

Network Cable

Switch

Network Cable P C

Connection Diagram forDAG2000-24S/32S

Connect gateway with network via a switch

Connect FXS ports(RJ21) with analog phones

100-240V AC

100-240VAC 50/60Hz

Grounding Cable

Grounding Lug

Network Cable

Switch

Network Cable

Telephone

RJ21 Cable

Connect FXS ports(RJ11) with analog phones

Telephone

RJ11 Cable

Wire Sequence

·Rj21 Wire Sequence

DAG2000-24S/32S support RJ21 Interfaces for FXS connections. One RJ21 cable

has 25 pairs of wires, but the 25 pair of wires never used. It means that RJ21 interface

only support 24 pairs of RJ11 interfaces.

Call No.

Colour

PIN No.

White

Blue

P26

1 2 34

White Orange White Green White Brown White Slate

P27 P3 P28 P4 P29 P5 P30

Call No.

Colour

PIN No.

Red

Blue

P31

68 9

Orange Green Brown Slate

P7 P32

P33 P9

P34

P10

P35

Red Red Red Red

Call No.

Colour

PIN No.

Black

P11

Blue

P36

11 12 13 14

Orange Green Brown Slate

P12 P37 P13 P38 P14

P39

P15

P40

Black Black Black Black

Call No.

Colour

PIN No.

Yellow

P16

Blue

P41

16 17 18 19

Orange Green Brown Slate

P17

P42

P18

P43 P19 P44 P20 P45

Yellow Yellow Yellow Yellow

Call No.

23 24

Colour Violet Blue Orange Green Brown Slate

Violet Violet Violet Violet

PIN No.

P21

P46

P22

P47 P23 P48 P24 P49 P25

P50

Modify PC’s IP Address

To log in the Web Management System of the gateway, you need to modify the IP

address of PC first to make it at the same network segment with the gateway.

On the P C, click ‘Network (or Ethernet) → Properties’.

Double-click ‘Internet Protocol Version 4 (TCP/IPv4)’.

Select ‘Use the following I P address’, and then enter an available IP address

‘192.168.11.XX X’ which is at the same network segment with ‘192.168.11.1’.

Open a web browser and enter the gateway's IP address (default IP is

192.168.11.1). Then, input username and password in the displayed login GUI.

Both the default username and password are admin.

Modify Gateway’s IP Address

Configure Gateway

Click Save and then restart the gateway for the new configurations to take effect.

(1) Configure SIP Server

(2) Configure SIP Account Information

If you want to modify the IP address of DAG1000-1S/2S/4S, please click 'Network

→ Local Network' in the navigation tree on the left of the Web Management

System, and then input new IP address and DNS server address on the displayed

interface.

the navigation tree and then enter the address of the SIP server which is to be

registered. Click Save in the last.

Click Port in the navigation tree on the left, and then click Add. Input the SIP

account and authentication password assigned by the SIP server.

Basic Operations

More Details

This document only provides instructions for quick installation and basic

configuration, For detailed configuration and parameter explanation, please

refer to user manual or ask for online technical support.

Dial *158# to query the IP address of LAN port of the gateway;

Dial *159# to query the IP address of WAN port of the gateway;

Dial *114# to query the telephone number of a FX S port;

Dial *165*000000# to restore default IP address, username and password;

Restore factory default settings:

(1) dial *166*000000#;

(2) press the R ST button for 7 seconds;then restart by manual;

(3) Log in the gateway and then click ‘Tools → Factory Reset’ , then click Apply

and restart the gateway.

Dial *111# to restart the gateway.

IP COMMUNICATION SOLUTIONS

Shenzhen Dinstar Co., Ltd.

Web: www.dinstar.com

Otros manuales para DAG2000-16S

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Puerta de Dinstar

Dinstar

Dinstar MTG1000B Series Manual de usuario

Dinstar

Dinstar DAG2000-16S Manual de usuario

Dinstar

Dinstar DWG2000 Series Manual de usuario

Dinstar

Dinstar MTG2000 Manual de usuario

Dinstar

Dinstar MTG1000 Manual de usuario

Dinstar

Dinstar DAG2500-48S Manual de usuario

Dinstar

Dinstar UC100-1V1S1O Manual de usuario

Dinstar

Dinstar MTG200 Manual de usuario

Dinstar

Dinstar DAG1000-8FXS Manual de usuario

Dinstar

Dinstar UC100 Manual de usuario

Dinstar

Dinstar DAG1000-4O Manual de usuario

Dinstar

Dinstar DAG3000-112S Manual de usuario

Dinstar

Dinstar MTG600 Manual de usuario

Dinstar

Dinstar DWG2000-1G Manual de usuario

Dinstar

Dinstar DWG2000D Manual de usuario

Dinstar

Dinstar MTG1000-4E1/T1 Manual de usuario

Dinstar

Dinstar DWG2000-1G Manual de usuario

Dinstar

Dinstar DAG3000-312S Manual de usuario

Dinstar

Dinstar MTG1000 Manual de usuario

Dinstar

Dinstar DAG2000-16S Manual de usuario

Dinstar

Dinstar MTG2000B Manual de usuario

Dinstar

Dinstar DAG1000-4S Manual de usuario

Dinstar

Dinstar UC2000 Manual de usuario

Dinstar

Dinstar DAG1000-4S-V321 Instrucciones de funcionamiento y mantenimiento

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario