Dimplex LEE Manual de usuario

INSTRUCTION MANUAL

For domestic household use only.

LEE Silver 2kW Electric

Portastove

Model: LEE

8/50871/0 Issue 5

OCN 11905

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND

RETAINED FOR FUTURE REFERENCE.

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/

OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your product for

the first time and keep them in a safe place.

• When using electrical appliances, basic precautions should always be followed

to reduce the risk of fire, electrical shock and injury to persons, including the

following:

• If the appliance is damaged, check with the supplier before installation and

operation.

- Do not use outdoors.

- Do not use in the immediate surroundings of a bath, shower or a

swimming pool.

- Do not use this heater if it has been dropped.

- Do not use if there are visible signs of damage to the heater.

- Use this heater on a horizontal and stable surface, or fix it to the

wall, as applicable.

• Do not locate the appliance immediately below a fixed socket outlet or

connection box.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the

appliance.

• Do not use this appliance in series with a thermal control, a program controller,

a timer or any other device that switches on the heat automatically, since a

fire risk exists when the appliance is accidentally covered or dis-placed.

• In the event of a fault, unplug the appliance.

• Unplug the appliance when not required for long periods.

• This product is only intended for INDOOR RESIDENTIAL applications only.

• DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings.

• DO NOT route cord under furniture or appliances. Take care to position the

cord away from traffic areas and where it will not be a tripping hazard.

• This appliance must not be used in a bathroom.

• Although this appliance complies with safety standards, we do not recommend

its use on deep pile carpets or on long hair type of rugs

• The appliance must be positioned so that the plug is accessible.

• If the supply cord is damaged it must be replaced by the manufacturer or

service agent or a similarly qualified person in order to avoid a hazard.

• Keep the supply cord away from the front of the appliance.

• Do not use this heater in small rooms when they are occupied by persons

not capable of leaving the room on their own, unless constant supervision is

provided.

• To reduce the risk of fire, keep textiles, curtains and or flammable material a

minimum distance of 1m from the air outlet.

• In order to avoid overheating, DO NOT COVER the appliance. Do not place

material or garments on the appliance, or obstruct the air circulation around

the appliance, for instance by curtains or furniture, as this could cause

overheating and a fire risk.

• This Heater carries the warning symbol indicating that it must not

be covered.

• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,

this appliance must not be supplied through an external switching device,

such as a timer, or connected to a circuit that is regularly switched on and off

by the utility.

• CAUTION Some parts of this product can become very hot and cause burns.

Particular attention has to be given where children and vulnerable people are

present.

• Children shall not turn on/off the appliance.

• Ensure that furniture, curtains or other combustible material are positioned

no closer than 1 metre from the appliance.

• Unplug the appliance when not required for long periods.

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious injury in as little as 2 hours or death, due to

chemical burns and potential perforation of the oesophagus.

• If you suspect your child has swallowed or inserted a button battery

immediately call the 24-hour Poisons Information Centre on 13 11 26 (in

Australia) or 0800 764 766 (in New Zealand) for fast, expert advice.

• Examine devices and make sure the battery compartment is correctly secured,

e.g. that the screw or other mechanical fastener is tightened. Do not use if the

compartment is not secure.

• Dispose of used button batteries immediately and safely. Flat batteries can

still be dangerous.

CAUTION: No obvious symptoms

Unfortunately, it is not obvious when a button or coin battery is stuck in a

child's oesophagus (food pipe).

There are no specific symptoms associated with this. The child might:

• cough, gag or drool a lot

• appear to have a stomach upset or virus

• be sick

• point to their throat or stomach

• have a pain in their abdomen, chest or throat

• be tired or lethargic

• be quieter or more clingy than usual or otherwise 'not themselves'

• lose their appetite or have a reduced appetite

• not want to eat solid food/be unable to eat solid food

These types of symptoms vary or fluctuate. with the pain increasing and then

subsiding.

A specific symptom to button and coin battery ingestion is vomiting fresh

(bright red) blood. If the child does this seek immediate help. The lack of clear

symptoms is why it is important to be vigilant with 'flat' or spare button or

coin batteries in the home and the products that contain them.

Exposed to the

weather outdoors

Near water If the power cable

wires are frayed or cut

Where small children

may be left unattended

No extension leads or

power boards

Where there is risk

of fire or close to

a naked flame

Where the power

cable may be

damaged

On a slope or

uneven surface

Where it may be

damaged by

chemicals

If there is a risk

of water falling on

the unit

Where there is a risk

of interference by

foreign objects

This product is not

made for DIY repair

Model no. LEE

Colour/Finish Silver

Heat Output

2kW

Heat Settings

Thermostat Control Y

Remote Control Y

Warranty 2 years

Dimensions (w x d x h) 565 x 280 x 730

Specifications

For greater precision, please always refer to the rating label placed on the product.

WARNING: FALLING OR TIPPING APPLIANCES CAN CAUSE INJURY OR DEATH OF

YOUNG CHILDREN, PLEASE ENSURE CHILDREN DO NOT CLIMB, HANG OR STAND

ON THIS PRODUCT.

Setup & Product Dimensions

General

Unpack the heater carefully and retain the packaging for possible future use, in the

event of moving or returning the fire to your supplier.

These models are fitted with castors and handles so they can be moved from room to

room with ease, and are freestanding and normally positioned against a wall.

The choice of 1kW or 2kW heat output is provided by the fan heater, which is located

at the bottom of the unit.

The fire incorporates a flame effect, which can be used with or without heating, so that

the comforting effect may be enjoyed at any time of the year. Using the flame effect

on its own only requires little electricity.

Before connecting the heater check that the supply voltage is the same as that stated

on the heater.

Please note: Used in an environment where background noise is very low, it may be

possible to hear a sound which is related to the operation of the flame effect. This is

normal and should not be a cause for concern.

CAUTION: Except for installation and cleaning described in this manual, an

authorized service representative should perform any other servicing.

WARNING – THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the voltage marked on the heater

must correspond to the supply voltage.

Before switching on, please read the safety warnings and operating instructions.

730

565 280

Operation

Controls

The switches provide a choice of heat settings, The appliance is in standby mode

when the mainslead is plugged in. This is indicated by the red neon behind the flame

effect screen. The two selector switches are in the ON position when the side with

the markings on (i.e. I, or II) is pushed

1. Selector switch 1 (0) - Controls the electricity supply to the appliance and

flame effect. Press for ‘ON' & ‘Standby’. If both selector switches 2 and 3 are in

the OFF position, the product works on flame effect only.

2. Selector Switch 2 (I) - Provides 1kW heat output.

3. Selector Switch 3 (II) - Provides 2kW output with switch 2.

Thermostat (T)

In order to maintain a certain room temperature, set the controller to ‘max.’. Operate

the appliance at full power until the required room temperature is reached. Set back

the thermostatic controller until the appliance switches off with an audible “click”.

This temperature will be kept almost constant by the thermostatic control switching

on and off automatically. Please note that the appliance can only be switched on

when the thermostat setting is higher then the room temperature.

Operation

Thermal Safety Cut-out

The built-in overheat cut-out switches off the appliance automatically in the event of a fault.

If this occurs switch off the appliance or disconnect the mains plug from the socket. After

a short cooling down phase, the appliance is ready for use again. If the fault should occur

again, see your local dealer.

Light Emitting Diode

This fire is fitted with LED (Light Emitting Diode) bulbs in place of traditional incandescent

bulbs. These generate the same light levels as traditional bulbs, but use a fraction of the

energy consumed.

Discard leaking batteries

Dispose of batteries in the proper manner according to provincial and local regulations.

Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly,

if all the batteries are not replaced at the same time, if disposed of in a fire, or if an attempt

is made to charge a battery not intended to be recharged.

Remote control

The maximum range of use is ~ 5 metres.

Warning: It takes time for the receiver to respond to the transmitter. Do not press the

buttons more than once within two seconds for correct operation.

1. To activate the remote control remove the battery isolation strip, which is used to

ensure your remote control reaches you fully charged.

2. To replace the remote control battery, turn over the remote control, and follow the

diagram embossed on the remote control

3. Only use CR2025 size of batteries.

Remote Control

To replace the battery:

1. Remove the screw, push down on the battery cover located on the back of the

remote control. Slide the battery cover open.

2. Install 1 x 3V CR2025 Lithium battery in the battery holder. The positive (+) side of

the battery faces up.

3. Close the battery cover and replace the screw

Otros manuales para LEE

Tabla de contenidos

Otros manuales de Cocina de Dimplex

Dimplex

Dimplex VLT-OV Manual de usuario

Dimplex

Dimplex DS5629 Manual de usuario

Dimplex

Dimplex DS7420 Manual de usuario

Dimplex

Dimplex Club Stove Manual de usuario

Dimplex

Dimplex Bellingham BLM4iSE Manual de usuario

Dimplex

Dimplex Willowbrook WLL20-INT Manual de usuario

Dimplex

Dimplex DS5598 Manual de usuario

Dimplex

Dimplex SNG20 Manual de usuario

Dimplex

Dimplex LVT20-AU Manual de usuario

Dimplex

Dimplex Stockbridge SKG20BL Manual de instrucciones

Dimplex

Dimplex Corner Standing Stove Manual de usuario

Dimplex

Dimplex Stockbridge 2.0 Manual de usuario

Dimplex

Dimplex DS5629 Manual de usuario

Dimplex

Dimplex DS4411 Manual de usuario

Dimplex

Dimplex Lucia LUC20-EU Manual de usuario

Dimplex

Dimplex Langbrook LBK5SE Manual de usuario

Dimplex

Dimplex DS3311 Manual de usuario

Dimplex

Dimplex Westcott 5 WST5SE Manual de usuario

Dimplex

Dimplex Westcott 5 Manual de usuario

Dimplex

Dimplex ELECTRALOG CS1205 Manual de usuario

Dimplex

Dimplex ELECTRALOG CS1205 Manual de usuario

Dimplex

Dimplex BAR20-AU Manual de usuario

Dimplex

Dimplex ELECTRALOG CS3311 Manual de usuario

Dimplex

Dimplex OAKMEAD OKM20 Manual de usuario

Manuales populares de Cocina de otras marcas

Arada

Arada Cassette Stove Manual de usuario

Parmco

Parmco FS 600 Manual de usuario

MCZ

MCZ SUITE AIR 10 M2 Manual de usuario

HearthStone

HearthStone Stowe DV 8321 Guía de solución de problemas

Cattara

Cattara FAMILY Manual de usuario

Stanley

Stanley Argon F500 OVAL Manual de usuario

Avalon

Avalon B-VENT Manual de usuario

Nordpeis

Nordpeis Vega Manual de usuario

Exquisit

Exquisit EKC601-5 Manual de operación

Stanley

Stanley Oisin Oil MK II Manual del propietario

Thermocet

Thermocet Brookfield S/CC Manual de usuario

HASE

HASE delhi Manual de usuario

Vermont Castings

Vermont Castings Intrepid 2 Manual de usuario

Italiana Camini

Italiana Camini CLASSICA Guía de inicio rápido

Avalon

Avalon Vashon Avanti DVS FS Manual de usuario

Spartherm

Spartherm ambiente a1 Manual de usuario

Warmlite

Warmlite WL46040 Manual de usuario

Regency

Regency Ultimate U39E Series Guía de inicio rápido